1) If B1:2008 is "EA" (and so on for about 7 other classes) then count how many days are entered in G8:2008 so a cell on a seperate distribution sheet tells me how many sickness days in total have been taken by EA's (and then the same for the other classes).
View 7 RepliesI've got a sheet where I've got products in one column.
The second criteria is "week #" for which the row remains consistent but the column varies e.g. "week 8" could be in cell L12 today and in L18 tomorrow.
I would like to return the value of the cell at which a particular product and week intersect. e.g. if "product a" is in B20 and "week 8" is in L18, I want the value of cell "L20" returned.
Product to determine Row #, Week to determine Column # for returning value.
If they interest multiple times, I would like to sum up the values intersecting.
Neither product nor week # is unique in the sheet.
I am searching for a formula that will evaluate a criteria that would be entered into a cell. I then need the total from the columns up to the point the criteria is met.
A simple example below. The criteria is in (what would be B1). Since that criteria was entered then the sum of the values in columns B, C, & D would be totaled. Excluding column E, or 516. If the value was changed to July-14, then 516 would be included in the sum.
PeriodJun-14
Apr-14May-14Jun-14Jul-14Total
XYZ 506 509 512 516 1,527
I am trying to create a formula that will sum up a value in one column if certain critieria residing in other columns are met. I have attached a sample and the criteria.
View 4 Replies View RelatedI need to compare data across two columns: the date a claim was filed (column T), and the date it was resolved (column AH).
On my summary worksheet, I'm displaying the claim details for each month. I need to show how many of the claims filed (T) in each month are resolved (AH) - and for this output I'm not concerned about when they were resolved. This lets us track if there's still money due to flow out of the coffers for old claims. For example, there were 5 claims filed in July, and 4 of them are resolved. I want my summary tab to return a value of "Completed" beside July when I enter the resolution date for that last one, and "Pending" until then.
All the fields I'm describing are formatted as dates - including the name of the month (eg, "July" is displayed because I've put a custom format of "MMMM" on 7/1/08).
I've been playing around with countif and sumproduct but can't quite figure this one out.
I need a formula that will highlight the entire Row when the criteria is met.
If Cell In column A = "Management" Then
Rows().Select
Row.Font.Bold = True
End If
If Cell In column A = "Scotia" Then
Rows().Select
With Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
End If
Countif must meet criteria in 2 different columns. I can get one criteria in, but not both.
View 3 Replies View RelatedSo I have 3 columns in this example. I want to average column K if certain criteria are met in Columns G & I.
Columns G & I have text values and Column K is a number value.
Does that make sense?
If I'm simply counting how many meet both criteria, I have this: =COUNTIFS(Data!I2:I282,"Waiting",Data!G2:G282,"Sev1")
but I want to now take those and average the values for Column K.
What I'm trying to do count the TRUE values in multiple columns, if the criteria is correct in another column.
I've tried countifs but end up having the company included into the count, or only count the row that matches all the criteria.
If I do =COUNTIFS(A2:A7,"A",B2:B7,"TRUE")+COUNTIF(C2:C7,"TRUE") then I get 5.
When I change it to +COUNTIFS(A2:A7,"A",C2:C7,"TRUE") it works but there's a time where I need to check up to 8 Options.
Company
Option 1
Option 2
a
True
True
b
True
False
c
True
False
a
True
False
a
True
False
b
True
True
On the attached example i would like a formula in F2 which sums all the values where column equals "Smith" and column B equals "Golf European". I'm assuming it would involve the SumIf formula but i'm not sure if this is the best solution when the criteria is in two columns?
View 3 Replies View RelatedI would like to return the value in column D (Store Name) that corresponds to the Max value in column N (Units Still Required). However, this Max value must meet certain criteria. That is, the State (column J) and Style Code (column Q) must be the same as that of the row being considered.
I have tried the below formula, and it appears to work the majority of the time, however, occassionally it does not adhere to the criteria (i.e. same State and Style Code).
For example in cell M7:
=IF(L7=0," ",INDEX(D$7:D$999,MATCH(MAX((IF((J:J=J7)*(Q:Q=Q7),N:N))),N$7:N$999,0)))
CTRL + SHIFT + ENTER
I'm trying to create a short script which performs the following:
Searches for a specific name in column C on my "Resource List" sheet, then When this is found, check column H to see if this is populated,Then when both criteria are met delete the entire row.
Using a link I found here [URL], I've put together the code below:
[Code] ....
The problem I have is that although the criteria are being met the row is not being deleted.
Macro below would be to only go down to the cell = to the bottom-most cell with data in column A.
These columns below are all in row A (the title row)
If column named "paper" says "white" OR "grey" AND
column named "pizza" says "mushroom" AND
column named "size" says "large" AND
column named "flavor" says "butter pecan"..
(again, only going down to the same matching cell with any data in column a)
Then delete these columns.
I'm making a spreadsheet that tracks instances when something goes above or below a threshold. Anytime it goes below, a column populates with the number 1, and if it happens to go below a threshold on a Friday, a separate column populates with the number 2. If its doesnt go below, the column with 1 does not populate, however, every Friday populates with a two.
I need a column that adds the 1 and the 2 when the threshold is broken on a Friday, but only shows the 1 when the threshold is broken on a non friday and shows 0 when the threshold isn't broken, but happens to be a Friday.
I'm not sure if this is the correct way to display my sample data, but here it is (how to change it. I looked in the guidelines, but I can't download anything onto this computer, so I can't get the HTML maker)
A
B
C
D
E
F
G
H
I
1
Descriptor
Group
Identifier
Inventory
Total Vaue
Invetory Type
Group
Total Incomplete Inventory Value
[Code] .......
Here is what I would like in:
The sum of the total value of half finished and unfinished inventory for each group.
So, for group one, it would be 145. For group two if would be 38, and group three would be 316. (displayed in column I)
I think an array formula would do this, but I'm not really sure how this would work.
I have two columns with numbers in ranging as follows:
2
2.5
3
3.5
4
4.5
5
On the spreadsheet it looks like this:
4.5
5
4
4.5
3.5
3.5
3.5
4
3.5
3.5
3
3
3.5
3.5
What I need to show in the next column is a True where these two figures add up to 8 or more. However, the minimum in each column needs to be 4 and 4 i.e. if one column has 3.5 and the next 5 then return a value of False.
I have a data ranging from J:EW with a heading in row 2 e.g. J2 the heading is "OT1 Hrs"; K2 the heading is "OT1Amount"; L2 the heading is "OT2 Hrs" and so forth. My difficulty is, it is too much multiple columns from J to EW, how can I draft the vba to hide a column that has "Hrs" in row 2 heading instead of doing it one by one.
View 3 Replies View RelatedTrying to create a dynamic vba code that searches the second last active column for a particular criteria. In this case it is the value "901".
If the criteria is met it will search the row to see if value is >=0 then change to zero where applicable.
In the example, I have a loop which searches Column 6 for the matching criteria. I want to change from Column 6 to "second last column" which is Dynamic to allow for more column to search through.
The two codes below search through column "A" and Column "B". Is there anyway to make this Dynamic also so it searches from Column "A" to the 4th Last Active Column.
So the Column to check for Matching Criteria is "Second Last Column" The Data to Loop through will be from Column A to the "Fourth Last Active Column".
Public Sub ChangeCellValue_TwoConditions_ColA()
Dim Last_Row As Long
Dim iLoop As Long
Last_Row = ActiveSheet.Range("A65536").End(xlUp).Row + 1
For iLoop = Last_Row To 1 Step -1
If (trim(ActiveSheet.Cells(iLoop, 1).Value) >= 0) And (trim(ActiveSheet.Cells(iLoop, 6).Value) = "901") Then
ActiveSheet.Cells(iLoop, 1).Value = "0"
[code].....
Basically, need to count rows that have 5 columns of data in it. If all 5 columns within a row have something in them greater than one character, that row needs to be counted.
View 1 Replies View RelatedI am having trouble coming up with an algorithm for deleting columns, based on a certain set of criteria. Heres the issue, all the columns have a "1" the top of column . If that column has a cell number that's greater than or equal to 0.90 or less than or equal to -0.90 then that column gets deleted, if it just has a "1" then the row doesn't get deleted. Very complicated set of criteria.
View 6 Replies View RelatedI am trying to figure out how to create a formula using multiple criteria in different columns. Ideally, I need to use the whole column (i.e. E:E rather than E2:E400) because I don't want to have to update the formula every time I input data.
I will simplify my spreadsheet for example purpose. Basically, column A has a unique identifier that either begins with an "M" or an "R." Column B either contains a person's name or a "-". Column C contains a dollar amount.
1. I need to be able to count all the cells in Column A that begin with an "M" AND have a "-" in Column B.
2. I need to be able to SUM the $ amounts in Column C ONLY for the items that begin with an "M" in Column A and have a "-" in Column B.
Is there any sort of formula that might do this? I have tried SUM arrays but as I said before, I would rather be able to use the whole column.
I am trying to run a lookup on a rather large table.
Column A Column B Column C Column D Column E Column F
Postal code City Province Postal code City Province
I am trying to look up the City and Province based on the Postal code and can't figure out how to do this.
There are too many Postal codes to fit them all in Column A, I have tried V Lookup, Index Match and can't get it to work.
Sumproduct help with criteria in Columns and Rows
View 9 Replies View Relatedi have a unique problem. I have a spreadsheet with 2 worksheets.
Worksheet A
Dlr# Dlr Name Zip Code
X123 Dane's 50266
X123 Dane's 50266
X123 Dane's 53135
X983 Andy's 50254
X983 Andy's 50254
X348 Ryan's 45678
So, this spreadsheet has some duplicate rows and some unique ones. All are needed as duplicate zips mean that the dealer is sending out multiple mailings to the same zip code.
My task is to transfer these into Worksheet B so that duplicate zips go in different columns but unique zips don't. So this is what Worksheet B will look like:
Worksheet B
Dlr# Dlr Name Drop 1 Drop 2 Drop 3
X123 Dane's 50266 50266
X123 Dane's 53135
X983 Andy's 50254 50254
X348 Ryan's 45678
My spreadsheet has over 500 dealers with over 1500 rows of data in it, so if there is an automated way to create spreadsheet B.
I have a large spreadsheet that is 65000 rows and colomns A thru W.
I need a macro to delete rows that if Date and Account and Type are
equal and the net of Quantity is zero delete those rows.
Col A = Date
Col C = Account
Col D = Type
Col J = Quantity
What the macro would do is if an account had 250 rows of activity on
say 7/7/2004 (Date) and same type of account and the net of all
Quantity is equal to zero delete those rows.
I am having an excel problem such that i have several months in a given year and I want to set up a formula where I can enter a specific year and it will return the sum of all the cells that belong to that year (see attached sheet). So basically if I have 2 months in 2006, 2 in 2007 and 2 in 2008 with corresponding values for each of those months, I want to enter a year in another part of the sheet and a value is returned to me to show me the sum of the revenue for all the months that are in that year. So if I enter 2007, it will sum both those values that belong to 2007.
The years and months are dynamic so I can't just sum the columns because in column D it could be 2006 (depending on the other inputs of my spreadsheet) or it could be 2007, so I essentially need some formula that checks the array to see if that cell belongs in a year that matches the criteria and if it does sum it to all the values that match that criteria. I have tried using vlookup, match, index but can't get it to work.
I need to run this funtion from the starting column (N) to the last column ( dynamic).
Sub HideUnits()
Dim rngData As Range, rngHide As Range
Application. ScreenUpdating = False
With Sheet1
.Rows(1).Insert
.Range("B1").Value = "Temp"
Set rngData = .Range("N1:N" & .Cells(Rows.Count, "N").End(xlUp).Row)
rngData. AutoFilter field:=1, Criteria1:="*Units"
Set rngHide = rngData.SpecialCells(xlCellTypeVisible)
rngData.AutoFilter
rngHide.EntireRow.Hidden = True
.Rows(1).Delete
End With
Application.ScreenUpdating = True
End Sub
As you might be able to tell I need to hide all the columns with a specific word in the heading. I'm pretty sure I'd need to loop this somehow, but I'm not good with VBA.
I am trying to delete columns or clear their contents after I meet a certain criteria in row 4. For example: I have one " Total" in row 4 that can be in any column. I wanna be able to delete whatever comes after "Total" in any row or column. Is there a macro that can do that?.......
View 2 Replies View RelatedI have attached a spreadsheet.
I have a dump of about 4000 calls (I have minimised the attachment for size sake) that I need to do certain reports on.
The second sheet (dump) has the data in its raw form from our call reporting tool. The 1st sheet (Report) is a broken down version the powers that be wish to see.
My formula needs to meet certain criteria, as you can see I only have 6 columns on the (Report) sheet where as the dump has lots !
The (report) sheet needs to list the Parent Case ID only if the Summary column has BSR at the beginning, if it meets this criteria then it lists the other relevant columns in the (report) sheet.
I have gotten a code. It goes into Sheet 1 and picks up all the Rows (entire row) in which Column A = 1.
Instead of copying the entire row, I need to just copy the row but only specific columns (i.e. Row 2, Column B,C,D,E,G).
Is there a way to specify where it pastes values in Sheet 2 (say from column D) because Column A-C have pre-filled data which do not change. And when it pastes, it has no gaps (despite a gap in the copied columns (i.e. Column F in sheet 1 was skipped)).
VB:
Sub cond_copy()
'assuming the data is in sheet1
Sheets("Sheet1").Select
Sheet2.Range("A2:G5000").ClearContents
[Code] .....