Sum Range Of Columns Until Criteria Met
Jul 28, 2014
I am searching for a formula that will evaluate a criteria that would be entered into a cell. I then need the total from the columns up to the point the criteria is met.
A simple example below. The criteria is in (what would be B1). Since that criteria was entered then the sum of the values in columns B, C, & D would be totaled. Excluding column E, or 516. If the value was changed to July-14, then 516 would be included in the sum.
PeriodJun-14
Apr-14May-14Jun-14Jul-14Total
XYZ 506 509 512 516 1,527
View 3 Replies
ADVERTISEMENT
Oct 20, 2006
I posted this on Mr Excel, but did not get an answer. I hope someone here can help.
I have a rather large financial worksheet that I am trying to extract some specific data from.
The sheet contains budget and expense #'s for the fiscal year for several projects. The project names are listed in column G and the same project can be on multiple lines, depending on what the expense is. Column J contains either "Cap" for Capital, or "Exp" for Expense. The monthly data starts at Row L. Each month has 6 columns, the one that matters for this scenereo is the 5th one for each month, which is the Forecast Column.
Our Fiscal Year is April 1 - March 31, but this sheet ruins from March - March so that we can carry over anything from the previous year. So the forecast column for March is column "P", April is column "V" and so on, adding 6 columns for each month.......
With me so far?
What I am trying to do is get the total forecasted expenses amount for a specific project for the remainder of the fiscal year.
In other words I need to look for a specific Project Code in Row G, look for "Exp" in Row J, Then get only the numbers that are in the Forecasted Column for months in the future and add them all up.
Just in case that is not totaly clear----
criteria to meet
Column G = "Project Code"
Column J = "Exp"
Row 2 > this month
Row 3 = Forecast.......................
View 9 Replies
View Related
Jan 29, 2013
I've got a sheet where I've got products in one column.
The second criteria is "week #" for which the row remains consistent but the column varies e.g. "week 8" could be in cell L12 today and in L18 tomorrow.
I would like to return the value of the cell at which a particular product and week intersect. e.g. if "product a" is in B20 and "week 8" is in L18, I want the value of cell "L20" returned.
Product to determine Row #, Week to determine Column # for returning value.
If they interest multiple times, I would like to sum up the values intersecting.
Neither product nor week # is unique in the sheet.
View 5 Replies
View Related
May 18, 2014
Macro for AverageIFS, with multiple criteria in the same criteria range....
View 9 Replies
View Related
Mar 4, 2008
i m trying to use the sumproduct formula, and OR but i cannot seem to get this right! =Sumproduct(--(A1:A10="Yes"),--(OR(B1:B10="Yes",B1:B10="Mayby")),C1:C10)
I have also tried Array Formula as follows; {=SUM(IF(A1:A10="Yes",IF(OR(B1:B10="Yes",B1:B10="Mayby"),C1:C10)))}
I have also used UDF to for the sumproduct, but cannot make that work! keep giving me value message
Function
Function Customer(Service as Range, Outcome as String, Service2 as Range, Outcome2 as String)
Customer = Sumproduct(--(Service = Outcome),--(Service2 = Outcome2), Result)
-Didnt get thru this bit to start building on the Function! keep giving me #Value!
View 5 Replies
View Related
Jan 31, 2009
I am tracking total man hours of contractors in columns of different rates applicable. At present I have structured my worksheet with the different rates across and days going down. As I am invoiced for a period of work I will log the invoice ref number in a separate field. I would like to sum totals to report against $ Invoiced and $ Committed (i,e worked but not actually invoiced against yet).
Here is an example of what I am trying to achieve. The Actual showing sum mhrs * rate only for the mhrs entries with an invoice in corresponding Invoice Ref Column. The Committed producing sum of all mhrs * rate [which I am using =(SUM(D9:D37)*D7)] regardless of what is in invoice ref column.
This way I can hopefully track what we have been billed and also what we can expect to have to budget for to cover what has been worked but not billed against.
View 9 Replies
View Related
Dec 21, 2006
how to use SUM Formula a column from within a Named Ranges or Dynamic Named Range?
For example, if the range name "MyData" refers to the address: A1:G10, how could I sum all the numbers in column G of that range where column A meets certain criteria.
Eg., Column A holds fruit names:
Apple
Orange
Banana
Apple
and column G holds quantities of the particular fruit. I'd like to sum column G (quantity) for only those quantities that match "Apple" in column A.
View 3 Replies
View Related
Feb 26, 2009
1) If B1:2008 is "EA" (and so on for about 7 other classes) then count how many days are entered in G8:2008 so a cell on a seperate distribution sheet tells me how many sickness days in total have been taken by EA's (and then the same for the other classes).
View 7 Replies
View Related
Sep 10, 2009
I am trying to create a formula that will sum up a value in one column if certain critieria residing in other columns are met. I have attached a sample and the criteria.
View 4 Replies
View Related
Nov 25, 2008
I need to compare data across two columns: the date a claim was filed (column T), and the date it was resolved (column AH).
On my summary worksheet, I'm displaying the claim details for each month. I need to show how many of the claims filed (T) in each month are resolved (AH) - and for this output I'm not concerned about when they were resolved. This lets us track if there's still money due to flow out of the coffers for old claims. For example, there were 5 claims filed in July, and 4 of them are resolved. I want my summary tab to return a value of "Completed" beside July when I enter the resolution date for that last one, and "Pending" until then.
All the fields I'm describing are formatted as dates - including the name of the month (eg, "July" is displayed because I've put a custom format of "MMMM" on 7/1/08).
I've been playing around with countif and sumproduct but can't quite figure this one out.
View 11 Replies
View Related
Jun 6, 2006
I need a formula that will highlight the entire Row when the criteria is met.
If Cell In column A = "Management" Then
Rows().Select
Row.Font.Bold = True
End If
If Cell In column A = "Scotia" Then
Rows().Select
With Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
End If
View 3 Replies
View Related
Jan 25, 2008
Countif must meet criteria in 2 different columns. I can get one criteria in, but not both.
View 3 Replies
View Related
Jan 27, 2013
I am trying to automate a process where a series of numbers would get populated according the range values. Also I am trying to get the automation to pick up the next range when finished with first one and continue with the task.
Here's what I have as start info and where I want to get to.
Sheet1
A
B
1
Ranges
[Code] ......
Excel 2003
View 2 Replies
View Related
Feb 5, 2014
So I have 3 columns in this example. I want to average column K if certain criteria are met in Columns G & I.
Columns G & I have text values and Column K is a number value.
Does that make sense?
If I'm simply counting how many meet both criteria, I have this: =COUNTIFS(Data!I2:I282,"Waiting",Data!G2:G282,"Sev1")
but I want to now take those and average the values for Column K.
View 2 Replies
View Related
Mar 13, 2014
What I'm trying to do count the TRUE values in multiple columns, if the criteria is correct in another column.
I've tried countifs but end up having the company included into the count, or only count the row that matches all the criteria.
If I do =COUNTIFS(A2:A7,"A",B2:B7,"TRUE")+COUNTIF(C2:C7,"TRUE") then I get 5.
When I change it to +COUNTIFS(A2:A7,"A",C2:C7,"TRUE") it works but there's a time where I need to check up to 8 Options.
Company
Option 1
Option 2
a
True
True
b
True
False
c
True
False
a
True
False
a
True
False
b
True
True
View 10 Replies
View Related
Nov 22, 2009
On the attached example i would like a formula in F2 which sums all the values where column equals "Smith" and column B equals "Golf European". I'm assuming it would involve the SumIf formula but i'm not sure if this is the best solution when the criteria is in two columns?
View 3 Replies
View Related
Jan 10, 2014
I would like to return the value in column D (Store Name) that corresponds to the Max value in column N (Units Still Required). However, this Max value must meet certain criteria. That is, the State (column J) and Style Code (column Q) must be the same as that of the row being considered.
I have tried the below formula, and it appears to work the majority of the time, however, occassionally it does not adhere to the criteria (i.e. same State and Style Code).
For example in cell M7:
=IF(L7=0," ",INDEX(D$7:D$999,MATCH(MAX((IF((J:J=J7)*(Q:Q=Q7),N:N))),N$7:N$999,0)))
CTRL + SHIFT + ENTER
View 2 Replies
View Related
Aug 19, 2014
I'm trying to create a short script which performs the following:
Searches for a specific name in column C on my "Resource List" sheet, then When this is found, check column H to see if this is populated,Then when both criteria are met delete the entire row.
Using a link I found here [URL], I've put together the code below:
[Code] ....
The problem I have is that although the criteria are being met the row is not being deleted.
View 1 Replies
View Related
Jun 17, 2009
Macro below would be to only go down to the cell = to the bottom-most cell with data in column A.
These columns below are all in row A (the title row)
If column named "paper" says "white" OR "grey" AND
column named "pizza" says "mushroom" AND
column named "size" says "large" AND
column named "flavor" says "butter pecan"..
(again, only going down to the same matching cell with any data in column a)
Then delete these columns.
View 14 Replies
View Related
Apr 30, 2012
I'm making a spreadsheet that tracks instances when something goes above or below a threshold. Anytime it goes below, a column populates with the number 1, and if it happens to go below a threshold on a Friday, a separate column populates with the number 2. If its doesnt go below, the column with 1 does not populate, however, every Friday populates with a two.
I need a column that adds the 1 and the 2 when the threshold is broken on a Friday, but only shows the 1 when the threshold is broken on a non friday and shows 0 when the threshold isn't broken, but happens to be a Friday.
View 1 Replies
View Related
Nov 7, 2012
I'm not sure if this is the correct way to display my sample data, but here it is (how to change it. I looked in the guidelines, but I can't download anything onto this computer, so I can't get the HTML maker)
A
B
C
D
E
F
G
H
I
1
Descriptor
Group
Identifier
Inventory
Total Vaue
Invetory Type
Group
Total Incomplete Inventory Value
[Code] .......
Here is what I would like in:
The sum of the total value of half finished and unfinished inventory for each group.
So, for group one, it would be 145. For group two if would be 38, and group three would be 316. (displayed in column I)
I think an array formula would do this, but I'm not really sure how this would work.
View 9 Replies
View Related
Nov 26, 2012
I have two columns with numbers in ranging as follows:
2
2.5
3
3.5
4
4.5
5
On the spreadsheet it looks like this:
4.5
5
4
4.5
3.5
3.5
3.5
4
3.5
3.5
3
3
3.5
3.5
What I need to show in the next column is a True where these two figures add up to 8 or more. However, the minimum in each column needs to be 4 and 4 i.e. if one column has 3.5 and the next 5 then return a value of False.
View 7 Replies
View Related
Jul 1, 2013
I have a data ranging from J:EW with a heading in row 2 e.g. J2 the heading is "OT1 Hrs"; K2 the heading is "OT1Amount"; L2 the heading is "OT2 Hrs" and so forth. My difficulty is, it is too much multiple columns from J to EW, how can I draft the vba to hide a column that has "Hrs" in row 2 heading instead of doing it one by one.
View 3 Replies
View Related
May 12, 2014
Trying to create a dynamic vba code that searches the second last active column for a particular criteria. In this case it is the value "901".
If the criteria is met it will search the row to see if value is >=0 then change to zero where applicable.
In the example, I have a loop which searches Column 6 for the matching criteria. I want to change from Column 6 to "second last column" which is Dynamic to allow for more column to search through.
The two codes below search through column "A" and Column "B". Is there anyway to make this Dynamic also so it searches from Column "A" to the 4th Last Active Column.
So the Column to check for Matching Criteria is "Second Last Column" The Data to Loop through will be from Column A to the "Fourth Last Active Column".
Public Sub ChangeCellValue_TwoConditions_ColA()
Dim Last_Row As Long
Dim iLoop As Long
Last_Row = ActiveSheet.Range("A65536").End(xlUp).Row + 1
For iLoop = Last_Row To 1 Step -1
If (trim(ActiveSheet.Cells(iLoop, 1).Value) >= 0) And (trim(ActiveSheet.Cells(iLoop, 6).Value) = "901") Then
ActiveSheet.Cells(iLoop, 1).Value = "0"
[code].....
View 3 Replies
View Related
May 30, 2014
Basically, need to count rows that have 5 columns of data in it. If all 5 columns within a row have something in them greater than one character, that row needs to be counted.
View 1 Replies
View Related
Jul 6, 2014
I am having trouble coming up with an algorithm for deleting columns, based on a certain set of criteria. Heres the issue, all the columns have a "1" the top of column . If that column has a cell number that's greater than or equal to 0.90 or less than or equal to -0.90 then that column gets deleted, if it just has a "1" then the row doesn't get deleted. Very complicated set of criteria.
View 6 Replies
View Related
Aug 17, 2007
I am trying to figure out how to create a formula using multiple criteria in different columns. Ideally, I need to use the whole column (i.e. E:E rather than E2:E400) because I don't want to have to update the formula every time I input data.
I will simplify my spreadsheet for example purpose. Basically, column A has a unique identifier that either begins with an "M" or an "R." Column B either contains a person's name or a "-". Column C contains a dollar amount.
1. I need to be able to count all the cells in Column A that begin with an "M" AND have a "-" in Column B.
2. I need to be able to SUM the $ amounts in Column C ONLY for the items that begin with an "M" in Column A and have a "-" in Column B.
Is there any sort of formula that might do this? I have tried SUM arrays but as I said before, I would rather be able to use the whole column.
View 9 Replies
View Related
Oct 25, 2007
I am trying to run a lookup on a rather large table.
Column A Column B Column C Column D Column E Column F
Postal code City Province Postal code City Province
I am trying to look up the City and Province based on the Postal code and can't figure out how to do this.
There are too many Postal codes to fit them all in Column A, I have tried V Lookup, Index Match and can't get it to work.
View 9 Replies
View Related
Nov 3, 2008
Sumproduct help with criteria in Columns and Rows
View 9 Replies
View Related
Jun 24, 2009
i have a unique problem. I have a spreadsheet with 2 worksheets.
Worksheet A
Dlr# Dlr Name Zip Code
X123 Dane's 50266
X123 Dane's 50266
X123 Dane's 53135
X983 Andy's 50254
X983 Andy's 50254
X348 Ryan's 45678
So, this spreadsheet has some duplicate rows and some unique ones. All are needed as duplicate zips mean that the dealer is sending out multiple mailings to the same zip code.
My task is to transfer these into Worksheet B so that duplicate zips go in different columns but unique zips don't. So this is what Worksheet B will look like:
Worksheet B
Dlr# Dlr Name Drop 1 Drop 2 Drop 3
X123 Dane's 50266 50266
X123 Dane's 53135
X983 Andy's 50254 50254
X348 Ryan's 45678
My spreadsheet has over 500 dealers with over 1500 rows of data in it, so if there is an automated way to create spreadsheet B.
View 9 Replies
View Related
