I have a sheet that has a list of products in column A. These all begin with either an "H" or a "S" The following columns are sales values/pcm.
I would like to sum each row based on the first letter of coumn A. I have tred using the left function to deternmin the letter but I am not sure how to then sum that row accordingly.
I'm trying to write an IF formula that will return a number if the word in the adjacent cell begins with a specific letter. Here's what I want to show:
City
01
Express
02
Overnight
03
So "C" would return 01, "E" would return 02 and "O" would return 03.
I am trying to use a PRODUCT formula to return the product of a list of numbers in a column, between 2 specified dates. The spreadsheet is arranged as follows:
Column BA list of dates
Column C & DNumerical data not used in any calculations
Column EThe numbers to multiply together
Cell A1Start date to be used in the PRODUCTformula
Cell A2End date to be used in the PRODUCT formula
The formula I have to multiply the data in column E, subject to the start and end dates in Column A is:
{=PRODUCT(IF(B15:B1000>A1,IF(B15:B1000<=A2,INDEX(B15:E1000,0,4))))}
This returns zero though works appropriately if I replace “PRODUCT” with a “SUM”.
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
I would like to have a Macro to go from the first tab called "Start" and end up with the second tab "End" automatically. BAsically I need to take the product on each line under Tab Start and reproduce it for sizes 35-41 always ending with "-(size)". Then this new Product with Size needs to be multiplied one below the other for as many times as I have pictures (number shown under column B of the tab Start). Next to this value in column B of tab End I'd like the same name listed again but with the number 1, then 2, then 3, etc. as needed and the extension .jpg.
View 4 Replies View RelatedI am entering data and want to know how to have the adjacent cell use an If-Then statement. The cell to the left has a FedEx tracking number. If the tracking number in cell D4 begins with an 8, I know the package was sent by OS. If the tracking number begins with any other number, it was sent by BS. How to create a formula in cell E4 that would have OS entered if the tracking number begins with an 8, and then BS if it begins with anything else?
View 2 Replies View RelatedI am curious if there is a way to combine the content of rows based on a change in account number(column A). The tricky part of it is that an account number could be in the file once and another could be in the data twelve times. The list is sorted by account number. I want to take the product code and description and keep placing in the combined row for each account number. Attached is a sample of the data.
View 6 Replies View RelatedIs it possible to to return a date that begins on following mondayand adds days unless it was entered on a monday then just add 17 days
if someone enters a date say 10/01/07 (wednesday) i need to be able get the following mondays date and add 10 days to it IE 25/01/07
i need to look up a product based on the number and the qty. see the example attached.
On tab "Printer - S" 1 need to lokup the costs based on the product code 8 and the qty 100. How do i do this and make it adjustable for any range of priduct codes and qtys. Again, becuase this will be used on a Mac Office, i cannot use macros.
I want to highlight an entire row of data if the text in column A begins with "ABC". I can't seem to get the conditional formatting formula correct. My data goes from column A to column O.
View 3 Replies View RelatedIn the first sheet I have two columns, one for the product_id and one for the name of the product. So the Sheet1 is like a small database. The second sheet is for the orders.What I want is when I type the product id in the A column of the orders sheet(Sheet2) to auto insert the product name in the B column so i dont have to write it every time.
View 2 Replies View RelatedCheck the file for reference.
Basically, I want to conditional format(fill entire column with a color) if the numbers of non-empty cells for any given column are more than 2 for each team (labeled Alpha, Delta, Office, etc). So what I want to do is to count how many rows contain a letter (V or P) in a team (in column A) and if it exceeds 2, I can conditional format the entire column. I believe I know how to conditional format. I just need to get the counting function going.
Example.xlsx
how to delete complete rows that in column a end in the letter A
View 6 Replies View Relatedi have a combobox and have A, B, C, as options in the combobox
then I have a table from row 10 to row 50
if A is selected from the combobox, I want excel to show only rows 10 to 20 and hide rows 20 to 50
if b is selected from the combobox, I want excel to show only rows 20 to 30 and hide rows 10 to 20 & 30 to 40
if c is selected from the combobox, I want excel to show only rows 30 to 40 and hide rows 10 to 30 & 40 to 50
in other words, i want all rows 10 to 50 hidden at all times, until a selection A, B, C is made in which i want thoes related rows to be shows and all other rows between rows 10 to 50 hidden.
When I type a single lower case letter into a cell, what formula or conditional formatting should I use to always convert it to a capital letter automatically?
View 9 Replies View RelatedFor the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
I'm trying to create a supply order form. Is it possible to enter a product name in one cell and have the price for that product automatically appear in another cell? Is there a formula that I can use to make this happen?
View 2 Replies View RelatedI need to change a few hundred cells (one column) where the first letter may be a capital letter to a lowercase letter.
So:
GetAwardfromBid to getAwardFromBid
or
SmallLertter to smallLetter
i need VB to select the start date of booking and autohighlights the "blank booking slot cells" until the end date that is input in Excel. You can visualise this as a room booking system. The left most column is the dates and the first row represents the different rooms type. E.g. if one guest books the Twin Deluxe No. 123 room on 23 Oct 2006 until 25 Oct 2006. We wish the VB can essentially help us identify the start date then begins highlighting the three slots for 23, 24 and 25 Oct on the column for the Twin Deluxe Room 123.
View 4 Replies View RelatedI want to apply Data Validation to a cell, so that only the following combination of letters and numbers can be entered.
Letter Letter Number Number Number Number Number Number Letter.
e.g AB123456C.
I have a Sumproduct formula that should be resulting in 0. However, it is resulting in a very small number. I have 2 columns of data. The first one contains -169.5, -123.4, -34, -67.4, 169.5, 123.4, 34, and 67.4. The second column contains all 1's. When I create the following formula, =SUMPRODUCT(H27:H35,J27:J35), it results in 5.68434E-14.
Sometimes, when I have different numbers in the first column, but it still adds up to 0, the Sumproduct works.
What I need to do is count the number of cases and values of everything written between the first of January and today (242).
I know how to do it by counting the days from the 1st of Jan to today but how can I do it so it automatically updates each day.
This is what I have at the moment.
The product name is in K, the date is in H and the value is in M. The range is from cell 7 to cell 94
=SUMPRODUCT(--($K$7:$K$94="Pension"),--($H$7:$H$94<=TODAY()),--($H$7:$H$94>=TODAY()-242),$M$7:$M$94)
Maybe I should say conditional product of conditional sum. Eitherway, the values in column J are summed if P is column R for the repective row.
View 4 Replies View Relateduses CSV files for importing product data, problem is both have it formatted differently. What i ideally need is a master file that i can change whenever a price needs changing or product adding, this feeds down into 2 csv files that are formatted for the relevent softwares and then i can use a macro to upload these automaticly at end of day. ive tried using just excel but had no luck, i tried using access and custom reports but keeping getting errors as page size is 35 fields long and doesnt want to export as a csv,
I have Workbook A and Workbook B(csv file)
In workbook one I want to look for a unique code that is in both workbooks and if it is then return a result of the total.
As an example
WORKBOOK A
a0YC000000YWPE1MAP
WORKBOOK B
Code qty
a0YC000000YWPE1MAP 10
a0YC000000YWPE1MAP 1
a0YC000000YWPE1MAP 14
Result I need is 25.
What to type if it is a different workbook and not just a sheet.
PRODUCT shows a value even if 0*# =IF(H15*I15=0,"",PRODUCT(H15,I15))
View 5 Replies View RelatedI have the following which works just fine
=SUMPRODUCT(--(Table_owssvr[Migration Slot]>= (ActualMigrations!D$3-6)),--(Table_owssvr[Migration Slot]<= ActualMigrations!D$3),
--(Table_owssvr[Department]= $A6))
If I then add a condition ie
=SUMPRODUCT(--(Table_owssvr[Migration Slot]>= (ActualMigrations!D$3-6)),--(Table_owssvr[Migration Slot]<= ActualMigrations!D$3),
--(Table_owssvr[Department]= $A6), --(Table_owssvr[Is_Migrated]="TRUE"))
It returns nothing even though the Is_Migrated is TRUE
I have built a pivot table that shows parts used during a period of years. I need creating a formula that would sum each part by a particular year.
The table is as follows
A part number
B date
C total quantity
I want to display the totals on a separate sheet.
I have a set of 5,800+ data points between 0 and 1 that I would like to multiply together. When I use PRODUCT for the whole set, the formula returns 0. However, I can use a smaller subset of the data to return a very small number. I'm curious if Excel has a closest-number-to-0 or number-of-cells-for-PRODUCT limitation. Is there another way to perform this calculation?
View 4 Replies View RelatedThe following formula takes a census of people in our area by date and by hour (sample data attached): =SUMPRODUCT(--(FLOOR(Data!$B$4:$B$39,1/24)<=$B2+C$1)*(Data!$C$4:$C$39>=$B2+C$1))
The formula works great, but I would like to add another component whereby the census will only count someone if they have a certain description (see column A - with color descriptions). So how can I setup the formula, to say, only look at the "red" colors during the same specified dates/times and give me the same type of census...instead of looking at all of the data or creating 50 different ranges for all the colors?