Can Cell Keep Cumulative Of Values Typed In Adjacent Cell On Daily Basis?
May 31, 2014
See the attached excel table. I need the cell E4 to keep adding the values typed in the cell D4 on daily basis.The cumulative shouldn't be changed if there is no value in the cell D4. E4 should accumulate and keep the totals typed in D4...
I this, We are distributing work on 6 hrs/day basis. What I need is, I need to automate the work distribution on daily basis and should show the hrs also. and the projected date of completion. (yellow highlighted cells are where the formulas are needed)
How to go about fixing my spreadsheet so I am not having to manually update it each day..here is my forumla I am currently using...=(AVERAGE($D$2:$AH$2)-C5)*AI5...basically i need the cell below in D2 to change as every day a new day rolls off..for example the following day I need this formula to be =(AVERAGE($E$2:$AH$2)-C5)*AI5 ....so just that day changes.....do I need to use an If/then statement? if so how?
While I was working my daily expense I come up with this issue. I do eat outside while I am on work. Sometimes I go to Pizza, sometime I go to mexican etc etc. The common between them is word FOOD. I would like to modify the formula suggested by Ron Coderre
In cell b5 I have =today() which automatically updates the date on a daily basis. What I would like to happen is for each day there is a new line is automatically inserted with the date so:
Sat26/04/2008gone off sickFri25/04/2008Thu24/04/2008Wed23/04/2008Tue22/04/2008Mon21/04/2008Sun20/04/2008Sat19/04/2008Fri18/04/2008days holidayThu17/04/2008Wed16/04/2008Tue15/04/2008
I would also like any information on each of the line to move down when the new line is inserted. I am not really that good with macros or VBA but feel that is the only option to solving this problem. Also would everything still update even if the file wasn't opened for lets say the weekend. So it is constantly rolling.
I'm creating an log to track the total number of hours an employee works in one day and calculate regular and overtime hours worked based on the following criteria: overtime will be >8 hours in one day and >40 hours in one week.
Right now I have it 'mostly' figured out, but under certain conditions, it calculates more than 8 hours in one day for straight time. Is there a way to set a maximum value for the straight time cell and have the difference be added to the overtime cell?
I request you to write a code for me to fill the cell values as "Not Applicable" in Column "AZ", if the "B" Column cell values = "Justified", "Approved LSAR" & "Approved SDAR".
I have attached the work book of what I am trying to accomplish.
I am trying to build a sheet to track deliveries into the company I work for.
We book loads to come in at set times for production, I am wanting a sheet which I can enter the due time and the actual time of the the different companies and then produce a report in graph format to see which are the worst at late or early deliveries.
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
I have the names of companies in one column, and the amount they owe in cells in the column beside them. I then have a second list of companies that is a subset of the first. Is there a formula that would place the amount they owe in teh corresponding cell adjacent to the compny in the second list? I've attached a sample workbook, Full Company List in column A, amount owing in B, trimmed down list in D and ideally I'd like the corresponding values in E.
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
I have a spreadsheet, in which I need to lookup invoice numbers from a raw data file with ~5,000 line items on a daily basis. The lookup is based on two criteria searches (1) search product type (2) search product make. In this example, I have 4 product types:
1 – car 2 – truck 3 – boat 4 – motorcycle
For this example I want to search invoices; (1) first search for cars only (2) search for product make. In my attached example, the first item (cell E2) would return invoice number 7147875-FRD from the raw data file. The second item (cell E3) would return invoice number 7147877-NSN.
I have a spreadsheet to record profit or loss on a daily basis. The figure for each day can therefore be positive, negative or zero.
I want to add a column to display the total for the last 7 days (NOT the last 7 calendar days), in which either a profit or a loss was recorded (so excluding any cell that is zero).
I would prefer to add (insert), the column for each day as it comes and the range would obviously vary if the new day's figure was not zero.
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
I'm a business/application consultant for ERP software, and generally pretty solid when it comes to excel. However, I've come across a question for a personal sheet that I can't seem to solve.
In my personal budget worksheet, I'd like to set a budget on a cell-by-cell basis. When the budget is hit, I'd like the text color (or cell color) to change.
I.E. Cell D14 has a budget of $200. When I enter $200 in the cell, the text turns from black to red. I've searched through google with no luck. I have mildly searched this forum, but haven't found my direct answer - I have come pretty close though, in other languages
i had data in html format.i want the data to be splitted into columns in excel.
HTML FORMAT Employee name Emp id
johnabraham wesley peter neiljohn and so on....... 254800 254801 254802 254803
i tried copying the data from html to excel. Then applied text to columns but i m getting incomplete names from this step.
My problem is how would i get the full name in one Column(Column B) & the emp id in the next Column (COLUMN C).Column A will have the data copied from html page. The length of the employee name differs. The only saving tip is that the employee name will suffix with sno like
I have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case).
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
I want to have a formula that finds the sum of the values in Col 1 (Qty) for the rows that equal, eg: 140, in Col 2 (Product) So that I can have a list of Products of the Qty that relates to each product. (there are products in increments of 10 from 10 to 920, that is, 92 products)
In the picture below, I need a formula in column E to count the unique occurrences in column A (excluding blanks) if its corresponding value in column B (B1 value) matches that in column D (B2 value). Currently column E is showing the values I would want the formula to return.
Capture.PNG
At the moment I have a formula as below:
=SUMPRODUCT(--(B:B=$D2),--(A:A<>""))
this will do a countif in column A if column B matches the value in column D, but would not weed out duplicates for me.
Modifying my formula. I have attached the sample workbook below.
I have a large workbook with 2 rows of data I want to format (R25:R530, M25:M530). Row M is already populated, row R is new data that I am entering. When the value of a cell in row R is larger than its adjacent cell (R25:M25) in row M, I would like the font to turn red. When the value is smaller, I would like the font to turn green.
With the amount of time I've spent attempting to conditionally format, I could have gone through and formatted each cell individually by now!
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range Dim WB As Workbook Dim MyPath As String Dim lastCol As Integer Dim newRange As Range
Macro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.
For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.
I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.
I was wondering if there would be a way to use vlookup and still be able to type text in the same cell. For example, if the vlookup gives me a result of 123. I want it to also pull from a different cell that I've typed in 321. So the resulting cell would show 321-123 or 321 123. I have attached a sample sheet. On sheet two where the 3 items are, I want it to display 321-123 for item 1, 321-234 for item 2, and 321-345 for item 3. The 321 would be dependant on what I type into B1 on the first sheet.