I have written code for a userform, and after I enter in valid data, the cursor will not move on to then next field. I cannot even click on another field with my mouse. I changed some of the code around to add validation to it, and now I am unable to move on once a valid entry has been made. If the user enters in the value "9999" the userform works just fine, it only freezes when they attempt to enter in an employee number. I've tried a few different ways to resolve this, but nothing is working. This is the code I have written.
I want to create a UI form to allow users to upload data. The data will be tabular (1 column per data field, one row per item). There will be more fields than I need, and the fields will not be named, so I need the users to select which column each field is in (with up to 20 fields). What do you think is the best control / combination of controls to use for this.
I have a data entry field on a form that is formatted for percentages. Sometimes when i key in "10" it will correctly convert it to "10%" but other times it randomly converts it to "1000%". When the error occurs, I'm able to correct it by re entering the value a few times until it displays correctly as "10%".
In building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
I need a macro which will put "P" when the cursor will be moved by right arrow key in the range c19 to AG55 if the cells are blank suppose cursor is moved from c19 to c20 & if c20 is blank then "P" will come on, if c20 is not blank say "Z" is in c20,then at c20 "Z" will remain at c20 and the code will not put "P" at c20 then.
this are function which button needs to be able to do after clicking on it.
• When the value of only one of Description or Unit/Price is entered, a warning message appears.
• When the message is confirmed, return to the entry status for the new data.
• When the values of both Description and Unit/Price are entered, save the values in the list of product (worksheet Product), and increase Product No. by 1 and erase values from NewProduct worksheet this is the screen how it should look but button which should be able to do all the thing above at once is called List Entry [url]
after creating this function all the values from the table product need to be update into another table which sould look like that: [url]
Is there anyone how could write code which will do thing above?
in the attachemnt is the excel file which shows what I have done so far, as i am not a good programmer,so I do not know if it's right
I want a macro which will move cursor to right cell of the same row when the user will press enter in a particular sheet of particular workbook. I have tried the ToolsoptionsEditmove selection after enter , but this applies to excel as a whole and needs to be change every time if another worksheet or workbook is used and thus creating difficulty.
Can this be done through a macro as I need the cursor to move to right cell only for a particular worksheet and for a particular workbook?
I am trying to position the cursor in a spreadsheet column based on the data within the column but am struggling with the software to do it.
What I have is: (a) A column (A:A) containing a mix of up to 500 numbers (1 to 3 digit) and a few text entries (1 to 6 char). These form the basis of a movement log where say 100 different drivers (each with unique identity) are logged in and out, so there will be duplicates. (b) A number of other columns logging task/times etc but the one I am interested in (B:B), contains a tick (martlet font "a") to denote the driver has departed.
What I want to do when a driver departs, is have a quick way of finding (from the top down) the row containing the drivers number (A:A) where the driver logged in, but has not yet departed (so I can tick him out!).
So from the top: find the first row (in A:A) matching a specific number/string, where B:B is also blank and position the cursor at B"x").
I have imagined a "button" with data entry at the top of the sheet being the easiest physical way of doing it but am open to offers.
Can the Cursor (or cell?) be highlighted as well, because this is not always easy to see in bright light.
I want play a trick on someone and make a button move out of the way when they try to click on it. I think that this code is from VB6.0:
Private Sub CommandButton1_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single) CommandButton1.Move Rnd(100) * 4000, Rnd(100) * 4000, 1000, 1000 End Sub
In Excel, this code results in Run-time error '438': "Object doesn't support this property or method."
I work with a sheet with active columns B thru I, which get daily numeric entries. The problem is that I have to enter data in columns H & I first, then go back to B thru G. how to force the cursor to jump to column B when I tab out of I into J?
how can i define, in vba that after click on button in sheet1, it looks at value in cell B1 in this sheet and move my cursor exactly on this value in sheet2 where i have data in range (B4:C6000).
Can I make the cursor use only 2 columns? In other words, I know that when I scan barcode data into A1, I have the cursor automatically move to B1. BUT, once I've scanned data into B1, how do I make the cursor automatically move to A2?
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
Does anyone know the equivalent of CTRL (Home) to move the cursor to the a1 position in VBA? I have tried Range(cells(1,1),cells(1,1)).select but with no success
Is there a way to automatically move cells down after I entered data in it? This way I do not have to scroll all the way to the bottom of the list to add new data.
I am on the row 100 in column G. I had a freeze the first row where i have hypertext and other function. I want add here (in the 1. row) something like hypertext, but i want to stay in the row where i was.
When i am on row 100 in column G and i want to create function which move my cursor to column W but in the same row (row 100 in this case).
Next time i will be in row 154 and i will want to move my cursor again in column W and use this same hypertext/function or what.
I have a simple formula ='info page'!b2&'info page'!b5 in places that on my sheet adds a company prefix to a item number, prefix in b2 and item in b5, we have a client that we cant use prefixes but now when I leave the field blank its giving a zero and thats not good either. I'm pretty sure an IFERROR or something will work but can get the syntax right.
I am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
I have a row of dates in row 2 (all sequential, from Nov through to June next year)
I have a row of number entries in row 3 (to correspond with the date in row 2 it was entered on).
I want to be able to add a new entry (a number) into a text box, click a macro button, which makes the text box input be moved into the cell underneath todays date (so every day the cell will move one column along)
I've managed to make myself a textbox, and a macro button, but I'm stuck with how to make it all work.
