When I enter some text into a TextBox, the first character is fine, but after the second character has been entered, the font seems to develop an underline. I've created a Word document with screenprints but have been unable to make it small enough to upload here, despite trying for the past couple of hours! You can therefore see the document here ... http://www.keepandshare.com/doc/view.php?id=508384&da=y
View 8 RepliesI am working in Office 2000, and have 3 Textboxes, I need to copy text from Textbox1 and Textbox2 to Textbox3, and the code below works but only when the character length is limited. I need to be able to show much more text. Suggestions. I am trying some of the code
Option Explicit
Sub Text_Copy()
Dim ch1 As Characters
Dim ch2 As Characters
Dim ch3 As Characters
With Sheets("Aim Up Description")
Set ch1 = .Shapes("TextBox1").TextFrame.Characters
Set ch2 = .Shapes("TextBox2").TextFrame.Characters
End With
With Sheets("Description Summary")
Set ch3 = .Shapes("TextBox3").TextFrame.Characters
End With
ch3.Text = ch1.Text & " " & ch2.Text
End Sub
I have found code on other posts that I have tried (like, Range("A16").Value = Val("TextBox1"),
In Userform1 I have several textbox and one commandbutton1. If I mouseclick on a textbox and click commandbutton1 the letters YES is entered in the texbox. To prevent double click entry into the same textbox I set the maximum length property at 3. However, setting the maximum length to 3 does not work. Subsequent commandbutton1 clicks will result in an infinite YES entries.
Is the maximum length property disabled when commandbutton entries are applied?
I have created a form and the form contains one textbox that will support only one character, I'd like that character to be Green in colour, after 2 minutes I'd like that character to turn amber and if another two minutes go by then turn red and remain as such until a new character is typed in and start all over again.
View 2 Replies View RelatedI am using a User Form to input data to a spreadsheet and have an issue. I've set the TextBox WordWrap & MultiLine Property to True and the textbox values don't show the reverse P character, but how do I get the "square" from populating into the cells on my worksheet? I was using this old thread as a point of reference, but didn't understand how to use or where to put it in my form. I'm referring to the code that Dave Hawley supplied. Strange Characters Pasting to Textbox
View 5 Replies View RelatedIs it possible to underline text with differenet color? Text is let say std. black, and need red underline. (I can change color of cell down but I would like underline line in right test test. underline.xls
View 3 Replies View RelatedIs there any way in excel to allow for whenever clicking on an active cell to make an underline or highlite the entire row that that cell is in?
View 2 Replies View RelatedMy spreadsheet is locked and protected, and i have found out that the BOLD, underline and italic functions have been disabled, is there anything i could do via VBA to keep these functions active,...????
View 4 Replies View Relatedlook at the attached file. How can I have the text values in Column A automatically be underlined if the concerning value in Column C drops below the value "1"? Note that Column C wont give you number values in this sample book as it refers to another file on my hd.
View 4 Replies View RelatedI need bolding and underlining cells that are "Concatenated". For example, cell format for cell K12 is already bolded and underlined. If I concatenate (C1,K12,D2) I get a result that doesn't carry over the format of those individual cells - particularly K12 which I want BOLDED and UNDERLINED.
View 9 Replies View RelatedI need to underline text which is populated from a formula. How to format numbers, dollars and dates within a formula, but how to underline text.
Desired Result: The employee's who sold more than 100 cars this month are: Alex, Mike and Tim. Please congratulate them on their performance!
Formula being used ="The employee's who sold more than 100 cars this month are: "&cell reference&"Please congratulate them on their performance!"
Current result: The employee's who sold more than 100 cars this month are: Alex Mike Tim Please congratulate them on their performance!
Attempts: I wish underlining text were an option within Format Cells/Custom so I could just use the formula =text(cell reference, "underline"). However, I don't see that as an option in the 2007 or 2010 versions. Is there a way to add "underline text" as my own custom format?
I also tried using "Conditional Formatting" (both "Format cells only that contain" and "Use a formula to determine which cells to format)." I can't quite get it because I don't know how to list names for the former conditional formatting. Vlookup is the only way I know how to refer to a list for the formula based conditional formatting, but this would stop after the first name on the list is found and ignore the rest of them.
each cell contains one word say hello in a1 and Henry in b1. Is it possible to underline Henry after =concatenate(a1,b1) ?
View 4 Replies View RelatedWhat I mean by my "bold" underlines:
QRG5UUl.png
Notice the difference between the bold underline and the normal ones. There is also some weird thing happening where in some cells, when I use the underline feature, it shows as a bold underline, but once I've pressed enter to move on to another cell, the underline reverts back to normal. If I select to edit (F2 or double-clicking) said cell, the underline becomes bold, and vice versa (s3lw.png).
All this started happening immediately after I did this (was just experimenting, and I have no idea what this actually does, or if it was the cause of those occurences): Insert > Symbol > Special Characters > No-width optional break. I did that to just one cell though, and now all this weird stuff is happening.
The formula is ="Total: " &SUM(B2:B10) Can you make the result appear bolded and underline. Just the result from the =SUM formula not the text Total.
View 1 Replies View RelatedCan Excel format text in a formula?
i.e.: =if(R25>6"This is Simple test", "This is the other part part of the test")
and then underline the word "Simple" or to have the word "other" bold.
To all sifus out there, how can i transfer from these:
NAS517-3-2
-41353913
NAS517-3-5
NAS517-3-4
-42MS27253-2
-43353908
-44357182
To these:
NAS517-3-2
353913
NAS517-3-5
NAS517-3-4
MS27253-2
353908
357182
I have got a list of numeric abbreviations, for instance 10739011/21/31/41. What it should really display are the numbers 10739011, 10739021, 10739031 and 10739041 (the first six figures stay the same). All the numbers in my list are 8 figures long. I want to change the list from the list seperated by the backward slash to the complete numbers. I have uploaded an example of the list with backward slash between the numbers. Is there a way that Excel can automatically change these numbers to the full numbers?
Because all the numbers are 8 figures long, I thought the first 6 figures of the 1st number can be copied and those 6 figures pasted before the other two figures after the backslash. Auto Merged Post Until 24 Hrs Passes;sorry, pressed OK too quickly. The problem is that there are sometimes 4 numbers in the cell, sometimes 6 and once three. I would like Excel to complete all the numbers in the cell and then move on to the cell underneath it and so on. Also, I would like each number to have it's own cell.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have a cell which will contain SER01+SER02+SER03
and what i need it to contain is [SER01]+[SER02]+[SER03]
and shocker is i've got this to work for the first instance but not the other two
code as below... be grateful for your help
Sub measure1()
Dim list As String, pos As Integer, refl As String, refr As String, newlist As String
list = Cells(1472, 16).Value
pos = InStr(list, "+")
refl = Left(list, pos - 1)
refr = Right(list, pos + 1)
newlist = "[" & refl & "]"
Cells(1472, 17) = newlist
End Sub
Need a formula/code that will determine what the corrected part number should be (insert dashes if they are missing) by comparing to other values in the list.
Original A1:A5 = {452, a-bc, 123, 4-52, abc}
Corrected C1:C5 = {4-52, a-bc, 123, 4-52, a-bc}
I can do this using an intermediate working column, but can this be done all in one formula, or via VBA?
My formulaic solution is thus: .....
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedCode:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."