I am using a User Form to input data to a spreadsheet and have an issue. I've set the TextBox WordWrap & MultiLine Property to True and the textbox values don't show the reverse P character, but how do I get the "square" from populating into the cells on my worksheet? I was using this old thread as a point of reference, but didn't understand how to use or where to put it in my form. I'm referring to the code that Dave Hawley supplied. Strange Characters Pasting to Textbox
I have a Textbox on a Userform that allows users to enter text and code copies the text to a nominated cell on a sheet. My difficulty is that when the text is copied to the cell at the end of each line of text there is a small 'open square' symbol that I would prefer not to show. I can manually delete the symbol but would like it either not to appear of be able to automatically delete it. If I copy the text to a word file the symbols do not appear.
Private Sub CommandButton1_Click() Sheets("Marketing").Range("b4") = UserForm1.TextBox1 Me.Hide End Sub
I am working on a spreadsheet which has a column which shows square footages (Column AE) and I also have a column which shows costs (Column Y).
What I would like to do is to bracket these footages in to 6 bands (0 - 5000, 5000 - 10000, 10000 - 15000, 15000 - 20000, 20000 - 25000, 25000+) and then average the costs within a particular band.
When importing text from a CSV, the 'line returns' appear in a cell as a small square with faded left and right sides. The do force a line break as intended. However, they are a nuisance in reading and printing.
When I use ALT+ENTER to force a line break, there is no visible character (on screen or printed) for the line break, which is as it should be.
How can I replace this 'special character' line break with one not visible?
I need a formula to tell me whether a number is a square number, or I can do it so to see if the square root of a number is an interger. So far Iv been doing
A1 = ă2 A2 = AND(RIGHT(A1,1)=INT(A1))
True or false outcome is fine, and it has been working fine on some examples, but the problem comes when I have ă49, as it is 2 digits long. I've seen a formula similar to find the root symbol, and look at all the numbers upto this point (maybe FIND).
I am looking for a way to show the character location number of a text file, possibly in the first row or a macro that I can run at any given location that will give me the location # I am currently viewing.
Currently, when I open the file I can see the character # at the opening screen (see attached file) but they disappear when it actually converts. I would like to be able to keep the character location ruler once the file is opened in Excel so I don't have to manually count.
I am looking for a text box code that works with a search userform.
Basically, I search using my userform find function and if there are more than one record found I want to be able to either:
1) have the records found appear in a listbox 0r 2) have the first record appear in the userform but a text box will show I am on 1 of X records and when I click a command button, go the next record, which will be 2 of x records and so on...
VB:
Private Sub cmbNext_Click() Dim FirstCl As Range 'first data Entry Set FirstCl = Range("a2").End(xlDown).Offset(1, 0)
[Code] ....
This is the code for the button that goes to the next record but I am unsure how to relate that a listbox or text box that shows the record number I am on out of the total that there are.
I would also be looking for another button that goes back one record. So i am hoping it's as easy as reversing the code for the next record function.
I am not sure if the listbox that could show all I records and one can just be selected is easier than showing the textbox with the " 1 of X records".
I am working in Office 2000, and have 3 Textboxes, I need to copy text from Textbox1 and Textbox2 to Textbox3, and the code below works but only when the character length is limited. I need to be able to show much more text. Suggestions. I am trying some of the code
Option Explicit Sub Text_Copy() Dim ch1 As Characters Dim ch2 As Characters Dim ch3 As Characters
With Sheets("Aim Up Description") Set ch1 = .Shapes("TextBox1").TextFrame.Characters Set ch2 = .Shapes("TextBox2").TextFrame.Characters End With With Sheets("Description Summary") Set ch3 = .Shapes("TextBox3").TextFrame.Characters End With ch3.Text = ch1.Text & " " & ch2.Text End Sub
I have found code on other posts that I have tried (like, Range("A16").Value = Val("TextBox1"),
When I enter some text into a TextBox, the first character is fine, but after the second character has been entered, the font seems to develop an underline. I've created a Word document with screenprints but have been unable to make it small enough to upload here, despite trying for the past couple of hours! You can therefore see the document here ... http://www.keepandshare.com/doc/view.php?id=508384&da=y
In Userform1 I have several textbox and one commandbutton1. If I mouseclick on a textbox and click commandbutton1 the letters YES is entered in the texbox. To prevent double click entry into the same textbox I set the maximum length property at 3. However, setting the maximum length to 3 does not work. Subsequent commandbutton1 clicks will result in an infinite YES entries.
Is the maximum length property disabled when commandbutton entries are applied?
I have created a form and the form contains one textbox that will support only one character, I'd like that character to be Green in colour, after 2 minutes I'd like that character to turn amber and if another two minutes go by then turn red and remain as such until a new character is typed in and start all over again.
I have created a drop down list but notice that the button (the arrow in the square) does not show up unless I click on the cell. Is there a way to show the button at all times so the user knows a drop down list is available?
I have a cell which will contain SER01+SER02+SER03
and what i need it to contain is [SER01]+[SER02]+[SER03]
and shocker is i've got this to work for the first instance but not the other two
code as below... be grateful for your help
Sub measure1() Dim list As String, pos As Integer, refl As String, refr As String, newlist As String list = Cells(1472, 16).Value pos = InStr(list, "+") refl = Left(list, pos - 1) refr = Right(list, pos + 1) newlist = "[" & refl & "]" Cells(1472, 17) = newlist End Sub
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I am getting 0 or 12:00 AM when I format cell as time and put formula.
I working on timesheet using this formula (=SUMIF('2'!G4,"="&TODAY(),'2'!E17)). If date in G4 on sheet2 match with todays/current date then copy data in cell E17 to sheet3(b11).
G4 = todays date E17 = time eg. 2:25 AM ( I have to format destination cell as time because E17 has time value
Formula works fine but when there is no data in E17 or E17 is blank then my destination cell shows 12:00 AM.
I have the following code, that I found on this forum, in my worksheet change event.
Private Sub Worksheet_Change(ByVal Target As Range) Static old_value As Variant If Sheet1.Range("C5").Value <> old_value Then 'a change has occured in cell C5 so do your processing.... MsgBox "Changing 5" old_value = Sheet1.Range("C5") End If.............................
Why is it that when I edit some cell's formulas and press enter the result is not the changed formula but the formula itself complete with the '=' sign infront of the fuormula. The work around for me is to cut the formula and paste it into a new cell then drag the old cell over the previous one I tried to edit.
When I return to a sheet by clicking on the tab of the sheet, the sheet is not immediately visible. When the sheet does become visible a cell has a black flashing background. Sometimes, but not always, the flashing cell is the activecell. Through the activate event of the sheet I attempt to make $A$1 the active cell:
I have this sheet full of random data and I want to recalculate extra fast so I keep my finger on F9 which causes the random data to randomize really fast of course. Now, in B1:AT1 I have numbers that change with every recalculation but here is the problem. I want the recalculation to stop when excel identifies a zero in that range which doesn't happen often.
I have created a vlookup and it shows as a formula not as data. I can do 'text to columns' to correct it, but I need to drag this vlookup to lots of different cells, then change it slightly in each one.
Every time I make a change, it reverts to the formula and I have to do 'text to columns' again.
When I first started using excell I was relatively good at it, however a few changes were made. The main one being for excell 2002 was the collumns were not by letter. A minor problem that I managed to get past. However the next was a function issue. Before I remembered a way to total rows with a simple function like =b3*c3, which worked for the first one. Then, from that point, I could copy that formula and paste it to all of the cells in the collum in which the forumula changed for individual cells to =b4*c4, =b5*c5, etc.
My questions are simple. Is there a way that I can do this on Excell 2002 without having to do it on a cell by cell basis, and is there a way to change collumns back to letters.
I've attached the spreadsheet in which I want to figure this out on. The goal, is to total price and quantities sold into the totals section without doing it on a cell by cell basis.
I have a form RiseSpan with three TextBoxes, txtInSpan, txtDepth & txtOutSpan. I wish to enter values in txtInSpan and txtDepth. These values are placed in cells A1 and A2. If both txtInSpan and txtDepth are greater that zero, I want txtOutSpan to show the value of cell C11.
I am doing a cross between two parents, whose possible genotypes are AA, BB, or AB. I want to use if clauses to look at the parent genotypes, (paternal is listed in column E and maternal is listed in column F) and then give me the possible recombinant genotypes in column G. there are 9 possible combinations (recombinants in parenthesis)
AA x AA (AA) BB x BB (BB) AA x AB (AA, AB) AB x AA (AA, AB) BB x AB (BB, AB) AB x BB (BB, AB) AB x AB (AA, AB, BB) AA x BB (AB) BB x AA (AB)
I tried using if clauses, but i don't think i can nest more than 7 cases, and I have 9 different combos.
