I have a macro that runs when a text box is clicked and searches in another excel sheet for a cell with a specified value. My problem is that I specify the string to search for in the code and I would like it to search for the string in the text box that gets clicked.
Here is what I have right now: ...
I have a sheet with 30 textboxes made with the drawing toolbar. The user enters data, then clicks on a button which formats the page to adjust row size to match amount of info. I am having trouble finding the code to store the currently selected textbox in a variable so that I can place the focus back to the same textbox when the macro ends. Can anyone help me with the code to get the active textbox?
View 9 Replies View RelatedI know that I can enter =$A$1 in a text box. But is there any way to concatenate more data with it. I would like to hase something like.
="Bill " & $A$1 & " Gates"
but Excel will not allow.
Is there anyway to automatically update a value in a cell to a texbox?
Eg
In sheet1, there is a value of 2.3 in cell A1.
In sheet2, I have a textbox created from the Drawing Toolbox.
The content in the textbox would always be " Total (Sheet1.A1.value) Months"
I'm using Excel 2007 and I am taking the contents of various user entered cells and creating drawing textboxes to display this data using VBA. How would I get VBA to resize the width of the textbox so that the text is displayed correctly in the textbox i.e. there will be variable lengths of text in the cells so I currenly can read the full contents?
View 4 Replies View RelatedI have a userform where the textbox already pulls data from a worksheet. I have a checkbox next to the textbox, If the checkbox is true it finds the textbox value on a worksheet and using Offset it inserts "yes" in the next cell.
View 6 Replies View RelatedI have a text box within a chart tab which is populated with text values from a worksheet within the workbook. That part works fine however i want to be able to achieve the following example:
Current Text: Component Name - Notes
if there are notes against the component name i want the name to remain in black and the notes to change to blue
Aim: Component Name - Notes
If there arn't any notes then for the component name and the "-" to change to a light shade of grey
Aim: Component Name -
There are 26 components, each on their own lines in the textbox so im thinking either a loop where the cell reference is variable eg. ("CY" & i) or using the .find with a variable.
My code so far is:
Code:
Sub Chart_Notes_NTCA()
Dim i As Long, j As Long, Counted As Long, Total As Long
Dim Ans As String, Notes As String
Dim Cht As Chart
[Code].....
I can't find anywhere where there may be some VB code to allow text within a cell in Excel to be circled. I don't want drawing objects, because many times I need to modify 30-40 sheets at one time and Excel doesn't allow you to alter drawing objects when you have multiple sheets selected. Therefore, I just want to be able to apply a circle around some text in a cell the same way you would underline it, for example. I figured my only hope is VBScript?
View 9 Replies View RelatedIn Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedCode:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
I am using on a form to display set data within a sheet.The below runs when a selection in Listbox3 is chosen.
However, Listbox3 may have multiply items, and thus I require an adaptation to find if part of the Listbox3 item is found in other records.
EG.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Listbox 3 may look like the attached sample file.In the sample, if you select 'APPLES", then I want Listbox2 to include "20/6/2014", and 'APPLES PEAR" has Apple as a part value.
[Code]....
Attached File : Listbox Part Values.xlsm‎
Query form using text box value. I have database and a search form and i need to display only the results based on queries (text box value).
VB:
Private Sub CommandButton1_Click() FindKeywords Me.txtNo.Value & Me.txtName.Value & Me.txtParts.Value
End Sub[COLOR=#333333][/COLOR]
MOdule
VB:
Public DSO As ObjectPublic DstRow As Long Public DstWks As Worksheet
Private Sub FindKeyword(ByVal Keyword As String, ByRef SrcWks As Worksheet)
Dim LastRow As Long
Dim Result As Range
Dim Rng As Range
Dim StartRow As Long
[Code] .....
I have a log that I am trying to make compatible for international users. They enter bike rides via a form. When the user hits submit Excel finds the date and then posts the ride info.
The problem is that if I format the date textbox (textbox1) as international the date inputted in textbox1 isn't being found in the column.
Here are the snippets of code from the form (other parts of the code were excluded because they shouldn't effect this issue.
Code when the form initializes ...
Dim lCount As Long
Dim rFoundCell As Range
Dim sfind As String
Dim cl As Range
Set rFoundCell = Range("A1")
For lCount = 1 To WorksheetFunction. CountIf(Columns(1), TextBox1.Value)
Set rFoundCell = Columns(1). Find(What:=TextBox1.Value, After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
With rFoundCell
End With
Next lCount.........................
this macro looks up in column A (a list of names) the name entered in textbox1 (of userform2). if found - the value is "copied" to E13. (if not - showes message - " does not exist") for example: it found the value "Dainna" (which was typied in textbox1) and copied it to E13. i want the macro to keep on to the next cell (in the row where Dainna's in- B3) and copy the age to F14.
i've got two textboxes and a command button on a userform.
Textbox1's value is "A" Textbox2's value is "B".
On commandbutton_click, i'd like to search down column P for textbox1's value.
then offset -5 to column J and insert textbox2's value.
Then Next search for the next textbox1's value and replace the offset again until all values have been replaced.
I've done the searches and not sure exactly how to go about it, it seems so easy but i'm getting tired of looking at this project.
I have a userform that has two comboboxes to search data on a sheet and a textbox to input data to a specific cell on the same sheet. The cell that the textbox writes to is determined by the combination of choices selected in the comboboxes. The comboboxes are searching as required but I don't know how to determine which cell to write my data from the textbox to. I'll attempt to clarify...combobox1(drivename) searches the data in column C, combobox2(unconformlist) searches the data in column H. The combination of these determines a specific row and I need to write data from the textbox(initials) into this row in column M.
Private Sub CancelButton_Click()
Unload Me
Sheets("Index").Select
End Sub
Private Sub initials_Change()
initials = UCase(initials)
End Sub
Private Sub OKButton_Click()
Dim ws As Worksheet
Set ws = Worksheets("QAQCconformity")...................
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I am sure this may have been asked before ... but couldnt find it on a search
I have a number of userforms in an excel database, all with add, edit search capabilities.
Several of the textbox's have a time format, when I enter the time it is shown in hh:mm format, it is stored on the spreadsheet in the same format. but if I use the search function to recall a record and display it on the userform, to allow ammendments the time is always shown as a decimal. Can I set it to display the time as entered.
An example of some coding for a text box is shown below
Private Sub TxForTime_AfterUpdate()
TxForTime.Value = Format(TxForTime.Value, "hh:mm")
End Sub
My question is, instead of deleting the row, how can I use the combobox to replace that row with the updated info rather than delete and resort? I have a combobox that selects names from a sheet, column A and populates itself on Userform activate/initalize. Using the Combobox to select a name, this code below populates all the fields on the form, various text and comboboxs.
When users hits the update button, it currently finds the row and deletes it, see second code example, but this reaks havoc on various parts of the program, I have to move the combobox and add name textbox's because when it deletes the row, the combobox takes on the next rowsource and then writes that info, rather than the info selected.
Private Sub ComboBox1_Change()
If bBlockEvents = True Then Exit Sub
If ComboBox1.Value = "" Then
Reset
bBlockEvents = True
ComboBox1.ListIndex = -1
bBlockEvents = False
Exit Sub
End If
userow = ComboBox1.ListIndex + 3
usercolumn = 1
If userow = "0" Then
ComboBox1.Value = ""
Reset
Else.......................
I've recently got a new computer and this problem is driving me nuts.
When I click view!toolbars!drawing, nothing happens. No drawing toolbar appears at the bottom of the screen where it used to be. There's a small "drawing toolbar" icon on the main toolbar, but whether this is depressed or not makes no difference either.
I understand this may be changed in the 2007 version, but I’m using Excel 2000
I want to have 2 cells where I can enter 2 numbers (length & height) so that a grid can be plotted. For example, a big sheet of paper size is length 30" x height 8", if first number is 10" (length) is entered, it will plot 3 lines across 30" (cos 30" divided by 10" equals to 3) and if I enter 2" (height) on 8", it will then cut it into 4". Attached a file for better understanding.
View 14 Replies View RelatedIn my attached sheet I've to find out final result in Column "F" (green shaded). My boss many times a year increases salary by certain percentage (say 30% or 40%) which is given in "E" column. After that I need to adjust it according to Pay Scale given in right side. For example one Executive's salary reaches 19880 after % increase. Now in pay scale we see in executive (row no. 13) it crosses 19800 so his final salary should be next upper value i.e 20600 (if it reached to 20700 after % increase, then his final salary could be 21400). That is final salary should be multiple of designation's increment plus minimum gross salary (Here 800X10=8000+11800=19800, since it exceed by 800, so salary should be 800X11=8800+11800=20600)
So we can either pull data from right side table or we can give formula in "F" column to get the required result.
salary adjustment.xlsx‎
I want to use VBA to update a drawing object's color, such as a circle.
For example, pretend I am counting sheep and I need to know when I have reached the maximum count by the visual aide of a stoplight. The script in my head reads: If the max. count of the sheep is less than 5, then the stoplight is green. If the max. count of the sheep is equal to 5, then the stoplight is yellow. If the max. count of the sheep is greater than 5, then the stoplight is red.
Is there a way to do such a thing on excel and with VBA?
How would i have VBA draw a line between a two ranges? say i have a named range of "start" and another name range "stop". i want to draw a red line between them. how can i do that with code. this is beggining my education for a much larger project I want to do later in the future.
View 9 Replies View RelatedThis is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB:
With Sheets("PICKLIST")
myFind = "*" & .[c1].Value & "*"
End With
If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB:
With Sheets("PICKLIST")
myFind = "*" & CHOICE & "*"
End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
I've created a userform that has one ComboBox (ComboBox1) and two text fields. I am trying to get the userform to return information to my worksheet in the same row as the name that is displayed in the ComboBox. This is my VBA code.
Private Sub Cmdpayment_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Sheet4
iRow = Cells. Find(What:=Me.ComboBox1.Value, After:=C5, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
ws.Cells(iRow, 12).Value = Me.txtpdate.Value
ws.Cells(iRow, 13).Value = Me.txtpayment.Value
Me.txtpdate.Value = ""
Me.txtpayment.Value = ""
End Sub
is there a code to draw a circle? by supplying the center position and the diameter? for example cell "A1" and " A2" are for the center of the circle position and "A3" for the diameter? and whats the code for drawing a rectangular by supplying the starting position and short length and the long length?
View 6 Replies View RelatedI want to draw circles from 3 points and other geometrical shapes. The points will be given from clicks on the background picture.
View 1 Replies View Related