I have a textbox that pulls language using the following code:
Code:
Private Sub TextBox1_Enter()
TextBox1.Value = Sheets("Language").Range("B2").Value 'places the value of the cell into the textbox
[Code]....
Randomly and sporadically, when working in the textbox, the form seems to reset. By reset, I mean that the language resets to what was there originally.
I am working on a simple parts numbering system.
I am using a userform to allow the users to pick from two combobox to generate the first 3 digits on the part number (which are inserted into a textbox automatically), the final 4 digits are auto generated using the following code:
[Code].....
This is called when a button is pressed, this then checks the already existing parts sheet to see if the number exists, if it does then it will ask for another number, incremented with the previous code. This will continue until a unique number is found.
This is the code that does this:
[Code] .....
My issue is that if I reset the form to create a new part number which is in another catagory, I need the auto increment to reset to 0, so the new part number can be checked. At the moment it carries on incrementing from the point the form is reset. The same happens if the user decides to change a catogory (maybe for the first part in the catagory, should be ***-0001), if the last part was ***-0055, then it will assign the new part 0056, not 0001.
So how can I reset the auto increment to back to zero on for example a listbox / combobox change?
Is there a function that reset all the combobox and textbox at once?
It is because I have changed my userform and now there is nearly 100 combo and textbox in it.
I have the following code that is not working properly. When the form loads it always shows data from the previous time the form loaded. I searched and found the following code which doesn't seem to be working correctly. I thought by unloading the userform the values of the textboxes would "reset". Not happening.
Private Sub CommandButton1_Click()
Dim cRow
cRow = ActiveCell.Row ' remember the current row
Cells(cRow, Range("Column_Type_Of_Ride").Column).ClearContents
Unload Erase_Ride_Form
Erase_Ride_Form.Hide
End Sub
I can't find a way to reset/clear the textbox in order to enter new data
View 2 Replies View RelatedI am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedI have a workbook with 20 worksheets the first is a summary called Discount Set the 19 sheets with various names
The 19 sheets in column H4:H40 u enter a number greater than 0 which is the quanty required. This is used to calculate a price on which ever row it is entered
the selection must only affect numbers as there are rows that are just shading and they contain no data .
So u could enter quanties on serval rows of different sheets to get a total price displayed in the Discount set
What I want to do is have button on the Discount Set which will clear any quantity that does not equal 0 back to 0 in column H which will reset the total 0.00
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I have a form that has three fields (1. Comments (TEXT), 2. Legacy_Comments (TEXT), 3, Comment date (DATE))
Now my users need to keep adding comments to the comment text box, and when they do it automatically adds the date they entered the comment in the Comment date box. Now my problem is that since they keep adding comments to the comment box, I need to keep track of these comments in the Legacy_Comments (Text box).
For example, the First time a user enters a comment into the (1) comment text box it auto populates the date in the comment date box, and then adds the comment and date to the Legacy_Comment box. the end result is (comment,4/3/2014 now lets say a user needs to add a comment to the comments box tomorrow - I want the legacy_Comment box to then read (comment, 4/3/2014; comment2, 4/4/2014, ...., comment(n),date(n)) OR it can be vice-verse, because I just need to keep track of the comments, I am not worried if the new comments are before or after older (yesterdays / the day before yesterdays comments)
How can I write a VBA code that will always add the new comment to the legacy_comment field, without deleting the comments that were entered previously?
Code:
If isnull(me.comment.value) Then
Exit Sub
ElseIf me.comment.value = true Then
me.comment_date.value = date
me.legacy_comment.value = me.comment.value & "," & me.comment_date.value & ";"
me.legacy_comment.value = me.legacy_comment.value & "," & me.comment_date.value & ";"
It adds the comment only the first time, but it does not concatenate the string from yesterday to the string to today. I do not care which order the comments are, meaning if I added a comment today it can be before OR after the comment from yesterday.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change()
If Me.cmbChooseLevel.Value = "Level 1" Then
Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value
End If
End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
I am trying to create a user form that has a series of text boxes that will all have a VLOOKUP function in them based off of input from a the first text box. If I can just get the code for the first one, I think I can figure out the rest. We will say that the file that the user form is contained in is 'Agent Administration' and the file that I want the VLOOKUP to pull from is called ' Roster for Auto Population'.
View 7 Replies View RelatedReset Counter to Zero:
I have Record ID on Column A: Auto Increment
I have a vendor Name on Column B: Vendor 1, Vendor 2, Vendor 3
I have a Code on Column C, Code A, Code B
What I want to happen is the Counter to count +1 each time. it sees the same vendor, same code and only to count to 4. As soon as it counts to 4; the next counter should be 0 (Zero).
Col A Col B Col C Col D
======= ====== ===== =======
Record ID Vendor Code Counter
======= ====== ===== =======
1 Vendor 1 Code A 1
2 Vendor 1 Code A 2
3 Vendor 1 Code A 3
4 Vendor 2 Code B 1
5 Vendor 1 Code A 4
6 Vendor 1 Code A 0
8 Vendor 2 Code B 2
9 Vendor 2 Code B 3
10 Vendor 1 Code B 4
12 Vendor 1 Code A 1
13 Vendor 1 Code A 2
14 Vendor 1 Code A 3
15 Vendor 2 Code B 0
It can be either in VBA or formula...
Is there a way to take the values between C2 & D2 and have them automatically post in column F ?
View 2 Replies View Relatedis there anyway i can reset this to start at st001 ive got everything done but i need to reset the orders to start at st001
View 3 Replies View RelatedI know that a variable of string type is equal to "" before it's assigned a value. So I reset the value of strings to empty (i.e. "") when I want them clear of a value. I also know that variables of Variant Type are equal to NULL when they are unassigned so I reset them to NULL when I want to clear them of a value.
But what about a Long? When you declare a variable of Long Type or Int Type or Double Type, what is it's inital value when empty and unassigned. I assume it's not 0 since 0 is an actual number.
I want to reset my lng variable and clear it of a value. So I'm wondering what should I set to... How can i do this?
In the below mentioned query, i want to reset the range according to the find result. Here the range I6 need to change with the active cell with a row down
Windows("Holiday Uploader Workings.xlsx").Activate
Cells.Find(What:=Reply, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
[Code]....
When I execute a macro, and if during the macro execution I press the "Esc" key, the execution stops and I get a Microsoft Visual Basic window with the message that code execution has been interrupted with buttons to Continue, End, Debug and Help. If I click the "End" button, the window closes and Excel is at rest - which seems to be some sort of Reset process.
I have a need to execute that process while Excel is at rest.
Is there any way to code the process in VBA?
i have cells A1 to A10 filled with numbers
i have cells B1 to B10 blank
what i need to do is when something is typed in cell B1 - A1 to A5 are reset to zero and when i type something in cell B2 - A2 to A6 reset to zero.
I have tried to do this as a range ie
A1- A10 have numbers in B1 - B10 copy these numbers and reset if anything is typed in C1 with this formula =IF(C1:C5="",A1,"0") what it should do is reset B1 to zero if anything is typed in C1-C5 but only when something is typed in C1 does this work ..
I am not experienced at all with Excel, here is my problem: In column "A": I have 288 rows and has nothing but numbers in them. Row 1 is the lowest number, row 288 is the highest number. In each row the numbers typically increase; every once in a while the numbers may stay the same, but the number will never be lower. The numbers range from 0 through 600,000.
What I want to do is have column "B" follow column "A" until the cell total reaches 12000. The next cell in column "B" would then reset and start all over from "0". I want it to keep on reseting every 12000 counts. Another potential problem is that a majority of the time the cell value will not be an even 12000, 24000, 36000 etc. They may be more like A40: 11742 A41: 13201 etc.
My spreadsheet has 459 rows; however, the vertical scroll bar ends at row 569738. I have attempted to delete all of the extra rows by holding SHIFT and CTRL, striking the down arrow then right-clicking on the left margin of highlighted row numbers and choosing delete. I have also done the same procedure except clicking clear all from the editing menu. None of these methods has removed the rows and enlarged the vertical scroll bar to a proportionate size in relation to the number of rows.
View 14 Replies View RelatedHow do I reset ALL the sorting in a file?
The first worksheet is all formula generated and has filters at the top, which I've variously sorted alphabetical. The second worksheet is raw data the user isn't intended to read.
Now I want to alter one of the formulas. The problem is, if I change it in row 2 and fill down I get all kinds of different information. This is because while the present formulas read
='other worksheet'!A265
='other worksheet'!A934
- and so on at random, when I resort them I just get A2, A3, and so on.
I currently have the following VBA to make a filter work automatically in column D:
[Code] .....
I also have filters in columns J, L and N.
I would like these columns' filters to reset when i open the worksheet, however the filter in column D to remain.
As mentioned I want to create a button that can reset this/a spreadsheet.
DWOR_2.zip
I have locked all the cells and unlocked the cells with the light green background. I.e. where a user can input data.
I haven't added a password yet nor protected the sheet. (the macro needs to work when the sheet is protected.)
I am looking for a macro that can be used to reset the sheet to its original state. However, the sheet needs to be protected.