Reset UserForm Textbox Controls
Mar 5, 2008
I have the following code that is not working properly. When the form loads it always shows data from the previous time the form loaded. I searched and found the following code which doesn't seem to be working correctly. I thought by unloading the userform the values of the textboxes would "reset". Not happening.
Private Sub CommandButton1_Click()
Dim cRow
cRow = ActiveCell.Row ' remember the current row
Cells(cRow, Range("Column_Type_Of_Ride").Column).ClearContents
Unload Erase_Ride_Form
Erase_Ride_Form.Hide
End Sub
View 9 Replies
ADVERTISEMENT
Mar 4, 2008
On the event that a combobox is changed the objects on my userform that relate to the same information as the combobox need to be disabled (and made invisible)... however if another choice is made then they need to be enabled again and then the objects relating to the new selection need to be disabled.
Private Sub cbo1_Change()
Dim DisableIndex As Integer
Dim CellAddress As String
Worksheets("Matrix").activate
ActiveSheet. Range("B1").Select
Do
If ActiveCell.Value <> cboVarNamEn.Value Then
ActiveCell.Offset(0, 1).Select
End If
Loop While ActiveCell.Value <> cboVarNamEn.Value
CellAddress = ActiveCell.Address(ReferenceStyle:=xlA1)
ActiveSheet.Range("B1:" & CellAddress).Select
DisableIndex = Selection.Cells.Count
Me.FrameAddEn.Controls("label" & DisableIndex).Enabled = False
Me.FrameAddEn.Controls("label" & DisableIndex).Visible = False
'there a few other objects here that will also be disabled... text boxes, check boxes etc.
Putting an unload/load command in won't work for obvious reasons and I can't use a command button because that would require my clients to actually think of pressing it.
View 3 Replies
View Related
Dec 18, 2006
I am planning to set a RESET(command button) button in my userform,so that user can delete or change all the input data which she/he have been entered,back to the default one that I predefined.
View 5 Replies
View Related
Jan 24, 2007
I can't find a way to reset/clear the textbox in order to enter new data
View 2 Replies
View Related
Jun 3, 2009
I am trying to calculate the result of two text boxes in a third textbox on a userform.
Box1 = DirectorHrs = a textbox that the user enters the number of hours
Box2= DirectorRate = a textbox that retrieves the rate from a sheet called "Rates" within the workbook upon initialise of userform.
Box3 = DirectorTotal = Box1*Box2. I want this to update when the user enters or changes Box1.
I have the following code on the change event of Box1
Private Sub DirectorHrs_Change()
DirectorTotal.Value = CStr(Val(DirectorRate.Value) * Val(DirectorHrs.Value))
End Sub
View 4 Replies
View Related
Mar 24, 2008
I created a userform. Now, I want to make a sum of the textboxes in my userform and pop up a warning signal is the sum isn't 18. I tried it in different manners, but I always get some problems. I entered default values of 0 in my textboxes. When I edit the values by using the userform, the popup message will appear even though the sum of my textboxes is 18. Here is the code for the pop up warning message.
If (Me.txt1.Value + Me.txt2.Value + Me.txt3.Value + Me.txt4.Value + Me.txt5.Value + Me.txt6.Value + Me.txt7.Value _
+ Me.txt8.Value + Me.txt9.Value) <> 18 Then
MsgBox "Vous avez fait une erreur. Le total ne donne pas 18 trous."
Me.txt1.SetFocus
Exit Sub
End If
View 4 Replies
View Related
Oct 1, 2006
I have a spreadsheet that has a userform attached to it with text fields that enter additional data regarding each record. The userform takes these additional 5 fields and inserts them back into the spreadsheet, the final information to be exported back into Access. ( There are of course other ways to do this, but this is how my supervisor wants it done!)
My problem is that now that I can scroll through the spreadsheet without closing the userform, the userform doesnt show the current row's information as I scroll or change rows on the spreadsheet. It will only show the information that was in the row that it was on before i switched back to spreadsheet.
View 9 Replies
View Related
Apr 11, 2008
I have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
View 3 Replies
View Related
Oct 23, 2012
I have a textbox that pulls language using the following code:
Code:
Private Sub TextBox1_Enter()
TextBox1.Value = Sheets("Language").Range("B2").Value 'places the value of the cell into the textbox
[Code]....
Randomly and sporadically, when working in the textbox, the form seems to reset. By reset, I mean that the language resets to what was there originally.
View 1 Replies
View Related
Jul 16, 2014
I am working on a simple parts numbering system.
I am using a userform to allow the users to pick from two combobox to generate the first 3 digits on the part number (which are inserted into a textbox automatically), the final 4 digits are auto generated using the following code:
[Code].....
This is called when a button is pressed, this then checks the already existing parts sheet to see if the number exists, if it does then it will ask for another number, incremented with the previous code. This will continue until a unique number is found.
This is the code that does this:
[Code] .....
My issue is that if I reset the form to create a new part number which is in another catagory, I need the auto increment to reset to 0, so the new part number can be checked. At the moment it carries on incrementing from the point the form is reset. The same happens if the user decides to change a catogory (maybe for the first part in the catagory, should be ***-0001), if the last part was ***-0055, then it will assign the new part 0056, not 0001.
So how can I reset the auto increment to back to zero on for example a listbox / combobox change?
View 2 Replies
View Related
May 27, 2008
Is there a function that reset all the combobox and textbox at once?
It is because I have changed my userform and now there is nearly 100 combo and textbox in it.
View 9 Replies
View Related
Jan 24, 2007
way of setting the values of textbox controls, the way im using below is very repetitive and has to be run through every time a combobox1 is changed. Im also going to have to add a lot more case scenarios in the short future.
Private Function setform()
Dim Xeng As Boolean
For Each ctl In Me.Controls
If TypeOf ctl Is MSForms.TextBox Then
ctl.Enabled = True
ctl.Locked = False
ctl.Value = ""
End If
Next
View 6 Replies
View Related
Oct 26, 2006
i am trying to adapt this code to show userform textbox's instead of cell information
Sub treeview()
Dim i As Integer
Dim nodX As Node
Dim strRel As String
Dim strRship As String
Dim strKey As String
Dim strText As String
Worksheets("sheet1").Activate
Range("a3").Select
For i = 1 To 3
'cell A3
strRel = ActiveCell
'cell B3..................
which i found here, fileTreeview control.
View 7 Replies
View Related
Nov 6, 2006
textbox1 on a userform populates textbox2 on a different userform via a command button.
how can i make sure textbox2 keeps the format from textbox1?
eg: when i enter 0.010 in textbox1 and click a command button to populate textbox2 on the 2nd form it produces a value of .01 instead of 0.010
View 3 Replies
View Related
Oct 16, 2006
On a multipage user form, a combobox control allows the user to select a value from a list, which automatically populates textboxes with other fields from the same list. This works perfectly. I tried to set up another combobox that would work in the same manner, but referencing an entirely separate worksheet and returning the appropriate values from that list to its related textboxes. My problem is that both comboxes are automatically populating ALL the textboxes, ie combobox1 returns the correct information in its related textboxes, but also changes the information in the textboxes related to combobox2. Combobox2 does the same in reverse. I can at least see and understand why this is happening - the combobox code for both is telling ALL textboxes with numerical tags to update.
Private Sub cmbPAYERefFirst3Digits_Change()
Dim rFoundSource As Range
Dim strText As String
Dim tBox As Control
If cmbPAYERefFirst3Digits.ListIndex > -1 Then
strText = cmbPAYERefFirst3Digits.Text
Set rFoundSource = Range(cmbPAYERefFirst3Digits.RowSource). Find(What:=strText, _
After:=Range(cmbPAYERefFirst3Digits.RowSource).Cells(1, 1), _
LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=True)
For Each tBox In Me.Controls ...........................
View 3 Replies
View Related
Sep 12, 2006
I am trying to populate the first 12 columns in the last row of the active sheet from 12 UserForm TextBoxes (TB5 thru TB16). Here is the
With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i - 1).Value = Me.Controls("TB" & i + 4).Value
MsgBox "Cycle " & i
Next i
End With
The MsgBox returns a "Cycle 13" only once. The Row has the first column filled but none of the rest. I am trying to load TB5 thru TB16 into columns A thru L of the last row (the last row was copied down to get the formatting and this code was supposed to over write the copied data and leave the formatting). But only TB5 loads into Column A!
View 6 Replies
View Related
Jun 6, 2008
I have the below code that I am using to find an empty textbox with the name FirstName. All it does is place the cursor in the FirstName text box if the textbox is empty, but doesn't really make it stand out. I was hoping to find a way to color the background of the textbox pink, or have it set up so it would stand out somehow.
View 4 Replies
View Related
Sep 3, 2007
how to display the result i made in macro to active worksheet so that i can keep a record of the result made in my random generator,
Sub timer()
TextBox1 = ""
TextBox2 = ""
TextBox3 = ""
TextBox4 = ""
Dim x As String, i As Byte
Randomize
x = Format$(Int(Rnd * 1899) + 1, "0000")
For i = 1 To Len(x)
Me.Controls("TextBox" & i).Value = Mid$(x, i, 1)
Application.Wait Now + TimeValue("00:00:03")
Next
End Sub
Private Sub CommandButton1_Click()
timer
End Sub
Private Sub TextBox1_Change()
End Sub
View 3 Replies
View Related
Aug 15, 2006
I have a userform with a lot of optionbuttons, checkboxes and textboxes, some of which an disabled when starting up the userform and become activated by clicking or unclicking others. The userform is shown by clicking a command button "Start" in the worksheet which runs a macro that contains a single line:
userform1.show
Finally have this very complicated code behind the userform working, but when i've finsihed with it and click Start again the userform appears with all the information still entered. Is there a way that I can reset all the userform objects and their properties & values back to their initial state without writing a long bit of code to reset them manually?
View 3 Replies
View Related
Jul 2, 2007
I am trying to change the property value of all optionbuttons on userform1 via userform2's deactivate event
Private Sub UserForm2_Deactivate()
If userform1.Controls = OptionButton Then
Value = False
End If
End Sub
View 5 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Aug 15, 2012
I have a userform that has nested multipages (5 in the outer page, 4 in the inner page).
On each of these multipages, I want to have the same controls (sliders) laid out in the same order - but with unique names, named after their tab location, for each control so I can use their value property later in the code.
I've designed the layout and named all the controls on my first sheet (e.g. Slider1Outer1Inner1). I now need a way of automating the replication of these across the other 19 sheets (including the nested inner multipage!); so that equivalent slider for example would be called Slider1Outer1Inner2, Slider1Outer1Inner3 etc.
I'm not sure about coding VBA to act on items within VBA...
VB:
" For each multipage in outer
For Each multipage In inner
For Each Object In current multipage
Copy inner.object -> Next multipage
Inner.object.name = CurrentOuter & CurrentInner & CurrentSlider "
View 2 Replies
View Related
Nov 17, 2008
What's the best way to hide controls on a userform? I have a userfrom with 2 datepicker one for start date and one for end date. I want them hidden until I use checkbox and check it to appear. I am using this code but nothing is work.
View 2 Replies
View Related
Jan 23, 2009
I have taken this code from Access and trying to use it in Excel to lock all the TextBox, ComboBox & CheckBox on the form.
View 2 Replies
View Related
Jul 18, 2012
How to disable different parts of a userform?
I dont really want to go through each control as I reckon it will be handy code to have in the future if I need to add more but so far my code is:
Private Sub UserForm_Activate()
With Sheet2
n = 3
[Code].....
View 2 Replies
View Related
Jul 11, 2008
I have a number of TextBoxes across the page, all set to Visible=False.
If these get filled with data then I need to set Visible=True.
Rather than hard code this individually for each one (which is not a problem, it just looks untidy), can I select each row as a Group (whilst designing the form, not in the code) and then set that Group to Visible=True ?
View 9 Replies
View Related
Nov 4, 2009
I have a userform that contains several textboxes, checkboxes, and comboboxes. There are also some command buttons, one of which says clear all. What I want to do is loop through the controls and clear the contents or change the value to false, depending on the type. I can do this by type the name.value = "", but there are alot of controls. If possible, a loop would be much more effecient.
View 9 Replies
View Related
May 18, 2006
I am trying to create some controls in a userform on the fly based on the data in a sheet. The part of my code is the following:
summaryForm.Controls.Add bstrProgID:="forms.label.1", Name:="LAWts", Visible:=True
With summaryForm.Controls("LAWts")
.Top = 120
.Left = 20
.Height = 18
.Width = 300
.Caption = "Weights: "
End With
Question I is that how can I connet this textbox to a click event or just to a procedure when it is clicked? I tried to use OnAction but it does not work for textbox in a userform. Question II is that how can I find the all properties of a textbox or any other controls? Is there a manuel or reference available on the internet?
View 3 Replies
View Related