Trying to find a way to close outlook from excel workbook close. If outlook is open then delay excel workbook 45 seconds from closing.If outlook is not open then close excel normal. Here is what I've tried with no luck
[Code] .....
I am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
My software is Excel for Mac 2011 version 14.4.3 (140616).
I am using the present value formula =PV(rate, nper, pmt, [fv], [type]), with the pmt expressed as a negative number, to determine the present value of a lump sum that would generate specific, equal, regular annual payments, exhausting itself in the process. I fill it in this way: rate is an annual rate, nper is the number of years the payments run, pmt is the annual amount paid each year, fv =0, type =1
I would like to be able to have a similar formula in Excel that would do the same thing except that it would take into account a time period where no payment is made, ie a "delay".
For example using the PV formula I know that if I have $49,019.96 invested at 1%, it will generate $10,000 per year for 5 years, leaving a net investment of 0. I would like to know the formula that would tell me how much I would need to invest at 1% to yield $10,000 per year for 5 years, again exhausting itself completely in the process, with the first $10,000 payment starting 3 years from now. I know it would be less because I would have the full amount earning interest for 3 years at 1% before any payments need to be made.
Problem: We have some rather large excel spreadsheets (142,000 rows, 190 columns) and some users that need to delete the data from rows of cells 5,000 rows + at a time. When doing this machines jump in CPU, Excel goes "not responding" and on average comes back to life 1 minute 45 seconds after pressing the delete key.
Note: We are not doing a right click and deleting the rows. This is a highlight of the 5000 rows and pressing the delete keyboard key to clear the data.
We've tried disabling the Auto Save and the Workbook Calculation changed to Manual.
Dell is no help, Microsoft is no help. This process can be replicated on multiple Dell machines and with Operating Systems of XP SP2, SP3 and Vista, machines with single drives, raided systems and even a machine with a solid state drive. All have 2GB of RAM or more.
Using EXcel 2013, Windows 8
I have an Excel worksheet with one column being e-mail addresses. Other columns are Christian names, etc
Ideally can I create a full Mail merge with Outlook using whatever data I want. But probably just e-mail address and Christian name?
Otherwise be able to send one e-mail to all the e-mail addresses, without a major re-type.
I have an Excel 2003 file that contains hyperlinks to OneNote notebooks on a Sharepoint site. An Excel macro looks for these links and determines the full hyperlink address which is then assigned to a variable. An Outlook message is generated which includes the hyperlinks.
The hyperlinks work in the Excel file. I can also copy them from OneNote and manually paste them into an Outlook message and they work. However, when I obtain their full address and transfer that to the email through code, the links do not work. The hyperlink address from OneNote starts with "onenote:http" which is not recognized as a link.
If I can do this manually, there must be a way to do this with vba. Are there characters I need to include in the OneNote hyperlink address to make this work? Is there another way to transfer the working link from Excel to Outlook?
link a date within a Excel sheet to the Calander in Outlook so a reminder can be triggered on said date.
View 2 Replies View RelatedI'm in search of a VBA macro which will send a mail through outlook automatically with the count of files(.pdf + .msg files) in any given folder.
I work for an organization, where we use Outlook for mailing purpose.
Everyday Inventory(.pdf files and .msg files) will be saved in a folder that is to be processed.
I want a macro which should automatically send the total inventory (.pdf files + .msg files) through my outlook mailbox(say: me@outlook.com) to a my superiors outlook mailbox(say: superior@outlook.com).
If the macro sends that email to my superior before me and my superior logon to computers at perticular time (say: 7:00AM daily), need to plan our day at work.
I have to send out emails to all of my staff with their new login ID's and PW's and other misc information one by one to each user. Reason being is that all ID's, PW's and other information pertains to that specific user and includes sensitive information.
I know there's a VBA script I can use to send out the emails, but the script I found online keeps crashing my Outlook and requires it to go through my personal inbox which takes 15 minutes every time.
I have the pertinent information split up into different columns/cells.
A1: email
A2: subject
A3: body (ID, PW, verbage)
A4: attachment link (if required)
A5: if I could have Outlook automatically stamp each email with my signature that'd be awesome as well.
How to add an appointment to a shared outlook calendar from Excel. I will be entering shipments in an Excel page and would love to just click a button and have an appointment made. I am very much a novice on how programs communicate with one another. The only information that will need to go on the appointment is the subject, location, and time. We set all our appointments at 15 minutes duration. The code I have so far is this:
[Code] ....
The problem is it only adds it to my default calendar. I need to be able to add it directly to the shared calendar in Outlook.
I'm trying to identify a way of setting up a booking system for some meeting rooms we have at work. Always looking for a way of simplifying something that soaks up one of my colleagues time.
I read this post about a golf booking system and it looks like it could be adapted to suit, I can imagine a different worksheet for each room and the fields for entry on choosing the timeslot being the meeting title, who booked and a contact number and the slot showing the meeting name when hovered over possibly.
I noticed a similar thread about Outlook, I know nothing about this sort of stuff within Outlook and not sure it may be possible. I am just in my infancy with hyperlinks and macros and do not feel confident enough to start there as I do not know where to begin. Keen to learn and would love to figure out and play around within a program; learn best this way.
I run excel 2010 on a windows 8.1 machine. In excel I have email address that I need to mail from however when I click the hyperlink it automatically directs me to Hotmail. Is there a way to change that to automatically load Outlook instead?
View 7 Replies View Relatedi have the following code in my Excel worksheet. This code successfully send out email to our customers when if the criteria is true. I have tested this at home and it works perfectly as I use Outlook at home. However when I take this code to work I couldn't get this working as at work we use Outlook 365 and we use web Outlook, OWA.
Is there a setting I can specify to use OWA as I don't think I am allowed to install outlook at work.
[Code] .....
I am trying to export the emails from outlook to an excel by the normal method. Here the body of the method is not exporting properly in to my excel. Is there any macro or a vb code to export the body of the messages to excel.
View 2 Replies View RelatedVBA code which will create a pdf file from excel (for a specific range in a worksheet) and then send it to a destinator via my outlook mail?
View 5 Replies View RelatedA B C D E F
Cust Cust ID $ Items File SentFile Confirmed
Bank a1a $50,000.00 1008:00 PM
Bank b1b $51,000.00 2009:00 PM
Bank c1c $50,000.00 30010:00 PM
Bank a1a $53,000.00 40011:00 PM
Bank e1e $54,000.00 50012:00 AM
Bank f1f $55,000.00 6001:00 AM
I use a report daily at work that is filled in during the day; I'm wanting to minimize some of the work to be more efficient. VBA to search a particular folder in outlook (ex: inbox - cust info ) and search within those emails to verify 3 items match (Cust ID / $ / items) before extracting data and putting it into column F for that item. For instance, bank a and bank c have $ values that match, but the other criteria dont - Cust ID and items. Also is there a way to attach a copy of that email to the spreadsheet, say in column G, it doesnt have to populate in the spreadsheet, but maybe the attachment will open even 6 months down the road? I am worried that a link will eventually get lost if an email is erased.
I have a scrip that i use to safe email attachments that works and is as follow.
Code:
Public Sub saveAttachtoDisk(itm As Outlook.MailItem)
Dim objAtt As Outlook.Attachment
Dim saveFolder As String
[Code]....
Now the problem is that the email comes with 2 excel email attachments and i only want to save the one that has a name + date stamp.
I am trying to make a macros for sending an email through excel using outlook.
The body of the email should contain ..(The following case has been processed and ready for Quality Check and also picks the case# from Cell "C3" and "D3")
The subject line should say "Case Processed and take the case # from Cell "B2".
It should also show the "To" Field and "CC" too.
Wanted to know can I transfer excel sheet to outlook pst?? If yes then how can I do so??? As I have lots of contacts list in Excel sheet but now I wanted to import those contacts to Outlook.
View 2 Replies View RelatedI have the need to convert regular emails to a excel sheet,
The emails are always sent from the same email address, and will have the same format ( however can contain small or large amounts of data eg 1 part number or 50 ).
sample email below
" PowerForce v4.00
Report : INR3050 v4.5
Title : EDI PURCHASE ORDER INBOUND ERROR EXCEPTION REPORT
For : ch3inl
Date : 05-Mar-14 06:06
[code]....
Due to one of our business requirement I have to fetch so many users Alias name through Outlook.
I am following below steps to achieve that Open new mail, giving user's name in to list, press ctrl+k, then right click properties. In properties I use to find alias name of user. I want to automate this process through excel sheet. I want to provide names in one column as Input to excel sheet and want to fetch alias name in next column of excel sheet.
I can send email from excel (Outlook). I want to send the same email "To" and "CC" with "category" and the same email with "BCC" with out "category".
I know how can i send email "To", "CC" and "BCC" with category.
I am automating Excel to send an email with a range as the body of the email. This all works fine and the email is presented before sending with the correct information.
The difficulty comes as I have a hyperlink (to intranet site) and when excel imports the data, it doesnt convert it into a hyperlink. It remains as text and hence you cannot click on it.
I have tried changing my outlook options to text and using word as editor, neither work. Has anyone else come across this issue?
I've used some code from another thread on the forum to create an Outlook Appointment and email this as an attached .ics file from an Excel spreadsheet. Everything seems to work fine. The email is sent and the attachment when double clicked opens in Outlook with all the correct information, but when the recipient clicks 'Save and Close' it doesn't save in their calaendar....
View 9 Replies View RelatedI have an excel sheet on which to address, cc address, subject , attachement location and file name is mapped. Can some one help me out but executing the macro it will pick the file from the location and send to the Recipient with cc and subject and attach the file accordingly. The excel sheet is attached for your reference.
View 3 Replies View RelatedI am currently sending email to a few people from excel using the outlook and excel connectivity.
The issue is I have to individually define a module for each person I send an email to and it is extremely inefficient.
My attachment makes it clear.
There is 3 tabs in the workbook.
Tab 1 (Method 1) is what I am currently using and I know it extremely inefficient
Tab 2 (Method 2) is what I would like to use
* When I select a cell and click send email, I would like for that person to be sent the email
* When I select a range of cells, I would like all of those individuals to be sent an email
Tab 3 (Email) is what I would like Method 2 to use - this tab includes a subject line and the email body. It sends the message in the email tab to the recipients I have selected in Tab 2.
exporting outlook calendar to excel using a macro?
View 2 Replies View RelatedI would like to export outlook email to excel, I have a VBA code, but the code exports email by sender email address, however I want the sender name not the sender email address.
View 3 Replies View RelatedI have set of send mail Performance from excel through outlook ... I have facing error like
"Run-Time error '-2147467259 (80004005)':
Array lower bound must be zero.
Attachment :
rte.jpg
RuntimeError.xlsb
I have my data in column A as Reminder Description and in column B as Due Date.
I was wishing to send an email using excel 2007 with outlook using excel vba... I want to send email 2 days before due dates and also i want excel to type in when the email was sent... Is this possible....???
A B C D E
Reminder Description Due Date Send Email1 Send Email2 Send Email3
Insurance due date is 06/08/14 06/08/14 04/08/14 05/08/14 06/08/14
Also can this vba code be executed whenever workbook opens....???