I would like to create a spreadsheet that when a selected number of cells are set to "yes" then a lookup to a small table should then copy 3 columns of text at the side of that table, if the criteria is met with a "1". If either f2, f3 or F4 = "Yes" then look up A9:c16 and if there is a "1" in respective column then copy all text to the right in columns D, E & F to "result" work sheet. I am trying to create auto copy of selected data without the use of a filter, by pressing a cell / button.
I'm trying to get a date picker to open with the current day's date, and am running into some trouble...
I added this line to the Initialize function:
Code: Private Sub UserForm_Initialize() DTPicker.Value = Date End Sub
...and this to a button which opens the form:
Code: Sub Open_frmPatientData() frmPatientData.Show frmPatientData.txtLastName.Value = "" frmPatientData.txtFirstName.Value = "" frmPatientData.txtID.Value = "" frmPatientData.txtDay.Value = DTPicker1.Day frmPatientData.txtMonth.Value = DTPicker1.Month frmPatientData.txtYear.Value = DTPicker1.Year End Sub
and I get a 'Run Time Error 424: Object Required' error on the line frmPatientData.show (in red). If I remove the line from the Initialize event, then everything works fine, but of course the current date isn't shown. What am I doing wrong?
I have a form button on a worksheet which calls a specified macro, is it possible to have the text which shows on the button, dynamic? I have created a template excel file, which the user needs to set up as they see fit. I have a separate page which is an 'admin' page where they can customize the narrative in the main template, which includes being able to change the text on form buttons on sheet 1. I have tried with this: Sheets("Approvals").Object("Button 1").Text = Sheets("Admin").Range("e14").value
This unfortuantely results in a "run time error '438' Object doesn't support this property or method". From that i would assume this function is not available, but i'm hoping someone may know a way around it??
i have created a form in excel sheet1 (not a VBA form) and there are 10 cells with headings in the form which need to fill the data but i want to copy certain cells (suppose 6 different cells) from my form which is in sheet1 and paste to another sheet2 to certain columns horizontally.
This spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet:
With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well.
I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
I am using the Microsoft Date and Time Picker Control 6.0 (SP4) from the more controls option on the developer Ribbon. The issue I have is when I protect the sheet I lose the functionality?
I have ranges selected as editable by user when the protect is on - this includes the linked cell to the date picker but it still doesn't work.
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
I am looking to copy the columns containing firstly H and then A from this sheet (sheet 1) to sheet 2. At the moment the H and A run in sequence, sometimes 2 or 3 times in a row but I want them to appear seperatly in sheet 2 so that I have all of the H's together in a sequence and all of the A's together in a sequence further down the sheet. I haven't used macros since school and don't have the first idea where to start. Do I need macros or is there a simple formula I can input? The data I am looking to copy is below with the letters in question 3 rows down.
I am not familiar with using VBA and believe this could solve my problem, I would be glad of any assistance.
I am trying to copy text from sheet 1 of my workbook onto sheet two of my workbook, whilst consolidating into a nice neat list omitting any blank cells.
The text appears on multiple tables each table has 10 rows throughout worksheet 1
A1 = Good A2 = Bad " " A10 = Fantastic
A15 = Good A2 = Bad A10 = Fantastic
I hope this makes sense, I do have a formula that will do this =IF(ROW()-ROW($E$500:$E$509)+1>ROWS($K$35:$K$44)-COUNTBLANK($K$35:$K$44),"",INDIRECT(ADDRESS(SMALL((IF($K$35:$K$44<>"",ROW($K$35:$K$44),ROW()+ROWS($K $35:$K$44))),ROW()-ROW($E$500:$E$509)+1),COLUMN($K$35:$K$44),4))) however I have multiple tables and the formula greatly reduces the speed at which the sheet is working.
clicking the platform button on sheet 2 runs a module that plots trains waiting in platforms 1-15 the value are got from sheet 1 columns
a = arrive b = depart c = platform
ideally i now need these shaded cells to show the departure code of the train they represent and i need every cell of the train to show the code (eg all 60 cells if the train stays for 1 hour). this is because some trains arrive as 1 but detach and depart as 2 or more trains. this would show where 1 train leaves but another part remains to leave later under another headcode, the codes i need placing over the shaded cells are the code in column I sheet 1 (ideally written in the invert colour of the shaded cell so they can be read easily) as an example of what i'm after i've manually added the code for 1 train in black on sheet 2 for the 1st train in the list http://us.f13.yahoofs.com/bc/466da4e...i.abGBkbJbSCH_
I have been trying to crack this all afternoon to no avail - I've read every thread on it and not been able to customise the macros to work! In fact - i've never written a macro before!
If cells in Colomn E on Sheet '2014 Events' contain the text "Park" - Copy the Row to Sheet 'Park Events'.
I have a commissions workbook with about 20-30 sheets. In A1 of every sheet is a Name and in column G is a bunch of Numerical Values. I want to create a "Grand Total" sheet where I have the Name and the Values corresponding from each of the sheets onto my final one.
i'm trying to do (for the past couple of days manually) is copy the names from the 2nd sheet to the 1st sheet but need to make sure that the proper location ID match that of the 1st sheet. If two names is assigned to the same location, a new line will be added to the 1st sheet but never allow if the location ID do not exist.
I have a workbook that writes what I need to do. When done I need to type in another sheet the exact same text and the date I did it.
I wonder if its possible to add a checkbox and when this checkbox is pressed it will automatically copy/paste the text to the next free cell of the other sheet, so I only need to type date.
Here is the workbook: [URL] .....
Check box would be added in cell A17, A18, etc.
And the text would be copied to sheet Preventive Maintenance Records in the next available cell in column A.
Essentially, I have 2 Sheets: "SheetWSS" = data to be copied "SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS" ----------A------------------------B-------------------------C 1------Trade ID -------Description---------System no. 2--------579----------------Loan ---------------------- 7 3--------580----------------Deposit---------------------22 4--------702----------------Deposit--------------------- 11 5--------703----------------Loan ----------------------- 58 6--------732 ---------------Loan------------------------66 7--------733----------------Deposit-------------------- 99 etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do: 1) Go into Column C, find system no.7 and 11. 2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied. 3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
Monthly, I get a CVV of data with associated statistics. I'm generally only interested in rows with the first cell (A) containing specific words.
The cells (column A) are those such as below:
make a webpage free create web page free make a website with yellow pages how to create web page
So, if I wanted to take copy the rows where the cell contains the text 'create web page'. I want it to take 'create web page free' and 'how to create web page' and the cells in their respective row.
I would like these rows to be copied into a new sheet.
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
VB: Private Sub Worksheet_change(ByVal Target As Range) Dim KeyCells As Range Set KeyCells = Range("K:K") If Not Application.Intersect(KeyCells, Range(Target.Address)) Is Nothing Then If ActiveCell.Value = ActiveCell.Offset(0, -6).Value Then ActiveCell.Offset(0, 1).Value = ((ActiveCell.Offset(0, -4).Value) * (ActiveCell.Offset(0, -5).Value) End If End Sub
Now I would like to add another code: When I will change value in actual cell (sheet1) then copy value from cell A1 (sheet1) to the first free cell in column A (sheet2). I still have problem with error that I am out of range if I tried to copy it to sheet2.
I'm creating a workbook to keep track of my utilities payments, one sheet for one utility and so on. I like to copy two cells from each sheet to another one to keep me updated of the amount to pay and the date. an example: column A with text, if text "NEXT" appear in column A, copy the value of two cells (at columns B & C) at the right of "NEXT" to another worksheet, if that possible? Below is a photo as an example:
I have one sheet for each day of the month with a table that has Employee Name, Reason, and Expected Return. I need to copy each line into the monthly sheet, but each day may have varying number of rows. Needless to say I would like to do this without copying lots of blank lines into my consolidated sheet.
I would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date Column D = loan# A Column E = loan# B Column F = status Column H = followup needed (Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows: Column G&H = Merged cells where due date will need to go Column I&J = Merged cells where loan# A will need to go Column K&L = Merged cells where loan# B will need to go Column M thru S = Merged cells where followup needed will need to go
I have a text box that has default text in it. When I mouse down on the box I would like it to select all of the text in the box automatically. Does anyone have any code to do this?
how I populate a form with values from a row in my excel sheet that i selected in a multicolumn textbox.
My "tool" works like this... The user opens the excel file and can choose one of two buttons, Add defect and Find defect. When the Add button is clicked Form1 is opened and the user fills in a number of fields which are then inserted into an excel sheet (same book though). Then there's the Find button. When the user clicks this button Form2 opens with a multicolumn textbox that displays some of the columns with some of the previously inserted information. Now I would like to be able to select one row and get Form1 populated with the values for that particular row. The user should then be able to change some of the values and the changes should be inserted back into the correct row in my excel sheet. How in the world do I do this??? Right now I just open my Form1 when I select a row and click an OK button. How do I get the values from my excel sheet back into my fields?I've tried to copy code from an example I found, but I can't get it to work.
My first form where I add my data
Private Sub UserForm1_Initialize() Dim rIds As Range Dim MaxId As Long
Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp)) MaxId = Application.WorksheetFunction.Max(rIds) With Me .IdBox.Value = MaxId
I have 7 different time pickers on a userform. They work great...they are passing the time to the correct cells. The problem is that if I close the userform and then open it again, the time value goes back to 12:00:00 AM, leaving the proper time in the cell. I'm trying to change the value of the time picker to the value in the cell when I initialize the userform using the following:
If Range("IncidentTime").Value < "12:00:00 AM" Then dtpIncident_Time.Value = Range("IncidentTime").Value End If
When I run it, I get a Run-Time Error '35788, An error occurred in a call to the Windows Date and Time Picker control.
I have a userform containing a date picker control. I am trying to get the date that is selected on to a woksheet called " Bank Holiday's" in cell O21.I have placed the following code in to a button used to close the form.
Private Sub CommandButton1_Click()
Sheets("Bank Holiday's").Select Range("O21").Select Range("O21") = UserForm17.DTPicker1.Value Unload Me End Sub
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
In this form when Lot ID is typed in and hit enter to go to next box, I like to search that lot ID in 'Processing" sheet and populate with corresponding date in the next text box. I hope someone can help me on this.
In real time the "processing" data is in a different workbook and sometimes is not available to the operators.
