If I have say ten rows hidden so that the numbers go from 50 to 61, how do I write a macro that will only reveal rows 51 to 60 one at a time, starting with row 51. If the macro is run a second time it should reveal row 52. A thirs time will reveal row 52 and so on. Finally, when all rows are revealed, the macro should not give a error wanring. Instead, it should say something like "No more rows available"
using Excel 2007/Vista
when I go a new edit a macro, I get the message
"Cannot edit a macro in a hidden workbook. Unhide the workbook using the unhide command"
Where do I find the relevant "unhide command"?
I'm having a challenge with a spreadsheet that puzzles me: I'm using this quite simple code to hide one of the spreadsheets (named "Ark2"). It written directly in a module as a subprocedure and there's no more code than this:....
View 4 Replies View RelatedIs there an easy way to make a macro to unhide all rows? I can do this to unhide a certain range however different rows maybe he hidden and so a set range won't work.
View 2 Replies View RelatedI made this simple little macro to hide/unhide a row on a different sheet based on a check box. The row hides fine. The problem I have is unhide. I uncheck the box, but the row stays hidden. What am I missing to make this little gem come to life? This is for tracking popcorn sales for scouting and I'm trying to make it as easy to use as possible.
Sub Patrol1_Scout1()
If True Then
Sheets("Show_n_Deliver_Sold").Rows("7:7").EntireRow.Hidden = True
End If
If False Then
Sheets("Show_n_Deliver_Sold").Rows("7:7").EntireRow.Hidden = False
End If
End Sub
Develop a macro that will enable me to hide or unhide worksheets.
Basically, I have a few worksheets in my workbook and I want to have a page at the front with two buttons. One for Unhide sheet and the other for Hide sheet. Once activated, I want it to give me a list of worksheets that I can click to hide or unhide (depending on the button i click).
I want to run 2 different macros:
Macro 1- hides Sheet1 and unhides Sheet2
Macro 2- Hides Sheet2 and unhides Sheet1
I used the macro recorder to attempt to make this work but am running into a problem if Macro1 is run two times consecutively. In this situation the macro displays a debugging error b/c Sheet1 is hidden. Is there a way to get around this...possibly using an if then statement?
I am trying to hide/unhide several columns by hitting a button. It's a pretty simple macro to do it once, but how do I get a button to hide on the first click, then unhide on the second?
View 3 Replies View RelatedI have a single button I want to use to call a macro to:
1.Hide columns C:AZ if they arent already hidden
2.Unhide columns C:AZ if they are already hidden.
need to create a macro that will hide/unhide rows. I have a list of items that need to be completed and under each item is another list that explains how to complete the items on the first list.
Let’s say for example, How to bake a cake
I want rows 2 – 6 to be hidden when the file is opened and then unhide when A1 is clicked. Then hide again when A1 is clicked again.
I have a huge list of items that need to work in this format.
The other thing I need is when the document is printed all of the hidden items are printed.
I want to set up a macro that will hide and unhide columns.
View 9 Replies View RelatedI have 16 sheets and 4 additional sheets that will kind of 'Group' these 16sheets. For example: I have 'Sheet1', 'Sheet2', 'Sheet3'......, 'Sheet16'.
4 additional Sheets are: 'Group1', 'Group2', 'Group3', 'Group4'.
I need a help with macro so that when this workbook is open all 20 sheets ('Sheet1', 'Sheet2', 'Sheet3'......, 'Sheet16') will go into hiding and only 4 additional Sheets ('Group1', 'Group2', 'Group3', 'Group4') will be visible. Now, these 4 sheets will have the command button links to the following sheets:
Sheet 'Group1':'Sheet1', 'Sheet2', 'Sheet3', 'Sheet4', 'Hide All'
Sheet 'Group2':'Sheet5', 'Sheet6', 'Sheet7', 'Sheet8', 'Hide All'
Sheet 'Group3':'Sheet9', 'Sheet10', 'Sheet11', 'Sheet12', 'Hide All'
Sheet 'Group4':'Sheet13', 'Sheet14', 'Sheet15', 'Sheet16', 'Hide All'
This being said, when you click on each command buttons, the respective sheets will open up and when click on 'Hide All', all of the open sheets for that *additional sheet' for example sheet 'Group1' will go into hiding again.
I have no idea about VB code and writing macros so I was hoping to get some help on this issue.
Is it possible to unhide a specific number of worksheets based on an input value, i.e. if someone inputs a value of '3' in the specific cell, then 3 worksheets with a certain name is unhidden?
I have a workbook that has 500 rows. In order to be able to print the spreadsheet, I have added a Macro in that hides any rows that have a "0" in the A column. I then put an if/then formula (ex. if(isblank(A5),0) so that if the cell was blank and 0 would be there and therefore the row would be hidden.
The problem now is that I want a new row to become unhidden everytime the row above has data in it. So, if row 5 gets data put into it, row 6 would become unhidden. The problem I'm running into is that the data in column A is peoples names, and therefore each row will have a different name (i.e. different data).
1. Is there a macro to do this?
2. (This may be a really stupid question, but...) Can you run 2 macros in the same sheet?
I'd like a macro that can hide/unhide certain columns. At the moment, the columns I want to hide/unhide are F, I, M, P, U and Y.
View 4 Replies View RelatedI need hide/show some column by using Macro Button. I have attached the excel sheet( name VBA testing.xls). I need to hide column K,L,N,O & visible column G,H by clicking button "Plan A".Similarly i need to hide the column G,H,N,O & unhide the column K,L by clicking the button "Plant 2. Similarly by clicking the Button "Plant 3", hiding the column G,H,K,L are needed whereas column N,O will be unhide.
View 7 Replies View RelatedI have the following code, it moves a row of data to another sheet based on a certain in the status column.
When the row is copied over to the other sheet, I would like when it pastes the data in to UNHIDE the row. This is due to the fact that at the current time all of the sheets have rows that are hidden unless there is data in them.
Is it possible you could add the unhide feature?
[Code] .....
Need a macro for each button.
The sheet will be protected with a password (in the future, users will have varied access privileges).
Column A is designated as the "Button" Column.
There are 5 buttons here. Each representing the area on the sheet that needs to be viewed. Once the button is pressed, it takes you to that section of the sheet. At this time, I have designated each column area as:
a-z
aa-az
ba-bz
ca-cz
da-dz
I have tried this formula with opening tabs, but this won't work.
I have a spreadsheet with all 365 days of the year in row 20 along 365 columns. I have buttons for each month of the year.
The days of the month are signified along row 20 from cell "H2" onwards as 1-Jan, 2-Jan, 3-Jan and so on until 31-Dec.
When I click on the "June" button (or any of the buttons with the month) I would like the columns with all the days from that month to unhide.
I have a worksheet that contains 10 columns of data. In row 2 I have a formula that will display the result "x" if the data in that column should NOT be hidden, and for all columns of data without an "x" in row 2 I would like to hide the entire column.
Therefore, I am looking for a macro that looks across the range of cells E2:N2 and if there is not an "x" in the cell, then hide that column...
To make things a little more complicated, the value in row 2 will change when other values are amended on other worksheets that feed into this one and I will need the macro to 'unhide' the column as soon an "x" appears in row 2
I'd like for my spreadsheet to open with only Column A visible; I'd like all other collumns to stay hidden.
I want to create a marco to unhide column(s) based on the value of an individual cell.
For example:
if I enter the number 5 into cell A1, I would like Columns B:F to unhide.
if I enter the number 2 into cell A1, I would like Columns B:C to unhide. Is this possible?
In the attached abbreviated example, what should the second line in each of the three macros read to direct the hiding/unhiding of rows in the adjacent sheet? Right now I'm trying a If/Then configuration but it's not working. I was able to figure this out using grouped check boxes but a list box should be graphically "cleaner" and hopefully simpler in coding. The original table list is hidden in column "A", if that is important. I could use a combo box but the menu list is short and I think the list box approach will be simpler.... If there is a way to combine the three macros into one.
View 2 Replies View RelatedI would like to create a macro/vb code that will unhide a worksheet if cell value is greater than zero, or hide the worksheet if the cell value is zero.
I'm not too familiar with VB code and was wondering if this is possible? I have my doubts, since it means that the code must constantly be running in an endless loop, checking to see if the value has changed?
I want to hide and unhide columns based on a cell's value.
If D6 of the ‘Summary’ Worksheet Is <> to ‘Test1’ and <> ‘Test2’
THEN Hide columns D:K of the ‘Charts – Source Data’ Worksheet
OTHERWISE Unhide columns D:K
I'm trying to record a macro which will hide and unhide columns K:P of data, but I only want one button. I know how to do this to produce one button for hiding and another for unhiding...but I want one combined button.
How to use vba, how I do this via the macro recorder?
I am trying to create a macro that will work on my master summary sheet. The sheet pulls information from other worksheets. I would like to have a macro that will look at range E7:E356. If the value is 0 then hide, but if the value changes then unhide the row. I have tried autofilter but it will not update automatically.
View 1 Replies View RelatedI have a workbook that contains approx 50 sheets and will grow to somewhere in the region of 200.
The majority of sheets, which contain the raw data referenced by the renaining sheets, are hidden. I will occasionally need to update the data in some of those hidden sheets and would like an easy / quick way of unhiding them.
The front page has several comboboxes which select the page needed for the calculation being performed, eg I select Chapter2 in the first combobox, section 4 in the second and page 12 in the 3rd. The output is combined / abbreviated into into a cell eg Ch2-Sec4-P12. That being the name of a sheet I then use INDIRECTs to retrieve the data I want and place it in a spare sheet, that works well.
I'd like to do the same to select the sheet to unhide. I can setup the comboboxes to give the name of the sheet I want to unhide / hide in a cell but then I'm stuck;
How can I use the contents of a cell in place of the sheet name in a macro command such as Sheets("data").Visible = Not (Sheets("data").Visible) ?
I need to do: Based on whether a cell returns "Export" from a vlookup function, I need a macro to run, hiding some cells and unhiding others at the same time. Also, if possible, if the cell's value changes from "Export" to something else, I need it to revert back to the original hidden/visible rows.
Like to create a macro (button) to hide / unhide rows based on a cell value
Example
A1=No then hide roa A
C1=No then hide row c
I have on sheet1 a number (72 at the moment) of Form CheckBoxes.
In simple terms: I would like a macro to look at each CheckBox and remember its state (Checked or Unchecked)
Then, go through and Check All checkboxes
Call MyMacro
Once MyMacro is complete (Filtering & Printing)
Revert the checkboxes to their original state.
The purpose of the checkboxes:
When Checked column on sheet2 is UnHidden
When UnChecked column on sheet2 is Hidden
Or, UnHide All columns on sheet2, run MyMacro, then "re-hide" the columns that were previously hidden.