Unwanted Highlighting When Running Macro
Jan 18, 2013
I am using macros for the first time in Excel. I have a sheet that pulls from attached sheets using VLOOKUP and I added a simple worksheet change macro to auto resize the height of cells to match the information being pulled via VLOOKUP:
Private Sub Worksheet_Change(ByVal Target As Range)
Rows("3:11").AutoFit
End Sub
My problem is that when the cells autofit it highlights the rows and some of the highlighting won't go away until the screen is scrolled. This is not much of a problem for me, but I do not want it to be an inconvenience to the other people who will be using this. Is there anyway to get rid of this highlighting or at least make it so that it behaves normally and all cells will unhighlight when a new cell is selected? I'm attaching a copy of the work in progress.
Matrix Checklist.xlsm
View 2 Replies
ADVERTISEMENT
Nov 28, 2009
I created the driver macro Mike2 (At first cosisting only of the first 2 lines) with keyboard shortkey +m, to run macro Mike. (In future additionals macros). Every time I run this macro it adds 2 lines to the Macro ,regardless of the End and Exit sub statements. Why?? Do not want this to happen.
View 4 Replies
View Related
Jan 27, 2009
I have a spreadsheet with multiple departments on it set out in no particular order, (just as they are added) and this sheet needs to stay like that as a record of when added.
The problem I am having is that I need to generate a bordered blank Weekly, Monthly or 52 week planner for what ever department needs it on a different sheet so it may be printed. This will contain that departments items but leave the days/weeks blank for them to fill out.
As an example I use the code below to loop through the original sheet and generate a 52 Week Planner if the criteia matches.
View 3 Replies
View Related
Jan 14, 2010
I have a VBA application in Excel.
In a certain time, when the code is executed in the
Private Sub CB_ValidaHoras_Click()
View 11 Replies
View Related
Sep 9, 2006
I have a sheet for addresses (Column 1 = Name, Column 2 = Address line 1, Column 3 = City, Column 4 = Postcode) and I run a macro that Filters that data based on the the city to different Tabs. This works fine except that sometimes, once the data is filtered I will find one or two addresses on my new filtered sheets that I really wanted to exclude. As my main address Tab information changes regularly, Ideally, I would like to see the Item on the City filtersheet, Double click it, and this would have the effect of deleting it from the City filtersheet but also copying it to an "Exclusions" Sheet which I could use before I run my normal filter macro to filter out these bad addresses.
View 9 Replies
View Related
Feb 15, 2013
I found this spreadsheet on here and I have been trying to customize it to what I need. I am trying to have scores from skins match highlighted. I want only the minimum score to be highlighted but if there is another duplicate minimum score I don't want it to highlight anything. I also need to find a way to count the skins won by each player and have it off to the side.
For those not familiar with golf a Skin is a game where you try to get the lowest amount of strokes on a specific hole. Ex- 4 people play the hole one. P1 scores 4, P2 gets a 3, P3 and P4 get 6. The skin would go to P2 who has the lowest score on that hole.
Highlight lowest number in each column not highlighting if there are duplicates starting at L6 down to L11 and for each column till AC. And the same for the group just to the right on attached file.
On row 13 and 14 it tells me who won a skin. I want to tally up the total skins won by each player. so if Joe's names shows up twice on R14 I want it to tell me somewhere in the sheet Joe = 2
View 6 Replies
View Related
Apr 28, 2014
I'm having a hard time making this maro work in Excel 2010.
I need it to filter out the items "AR", "BATCH", and the line of "Total:*" where the * is a total amount of any given number dependant on the day.
Below is the coding I have that Excel is not liking.
Sub FilterAccurateRawData()
'
' FilterAccurateRawData Macro
'
'
Rows("1:1").Select
Selection.AutoFilter
ActiveSheet.Range("$A$1:$AA$45415").AutoFilter Field:=1, Criteria1:=Array("<>AR", "<>BATCH", "<>Total:*")
Operator:=xlFilterValues
Sheets("Instructions").Select
Range("A9").Select
End Sub
View 3 Replies
View Related
Nov 6, 2009
I need to highlight cells for all of the products and rates I need to get pricing for. I have a macro that goes out to my data and pulls in each different rate and program (columns BM:BN). That macro also sets the first note rate in the range to the lowest of the group, so this will always be different.
I now manually highlight each cell that I need to get pricing, but would like to create a macro that looks up those codes and rates in column BM:BN and highlights the cells for me. I need it to highlight in all 7 boxes. I've attached a sample worksheet of what it looks like after I highlight the cells.
View 2 Replies
View Related
Jun 27, 2013
I work for a marketing agency where technical savvy-ness is really limited. We analyze a lot of web page elements. I have a program that exports this data into a csv file and I've created a template for the user to add this sheet. This data is primarily text. I've created a button on another sheet that runs a macro that extracts data from the first sheet onto the second sheet in a particular format for ease of reading and editing it. That part is all good, this macro works and the button works. Now I'm trying to have it such when a person edits one of these cells, it highlights the changes on this newly sheet using VBA (the highlighting changes function just turned out to be too messy and buggy for what I want). I have this basic change macro that I have on the sheet currently:
Private Sub Worksheet_Change(ByVal Target As Range)
Const WS_RANGE As String = "A1:H500"
On Error GoTo ws_exit:
Application.EnableEvents = False
If Not Intersect(Target, Me.Range(WS_RANGE)) Is Nothing Then
With Target
.Interior.ColorIndex = 30
End With
End If
ws_exit:
Application.EnableEvents = True
End Sub
This works as well. However, my problem is that when I run the data button macro, of course excel reads this as a change to the cell and highlights it as a change before any actual changes are made. How can I have it so I run my data macro, and the cell changes are highlighted only *after* the user goes in to edit the text data plugged in from the data macro?
View 3 Replies
View Related
Jul 3, 2007
Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
View 9 Replies
View Related
Jan 7, 2009
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
View 9 Replies
View Related
Dec 19, 2006
Can i run a macro by just the pointer going over it.
View 9 Replies
View Related
Apr 10, 2014
I'm trying to get a macro to run when the user presses the save button. I have the following code:
[Code] .......
This code is supposed to apply the TRIM function to every worksheet in the workbook when the user presses save, and the saves the results. I understand the Private Sub bit is the code to have the macro run during the save, but for some reason the macro itself isn't actually running. I'm not getting any error message, its just that the cells which should have the TRIM function applied to them aren't being corrected.
View 4 Replies
View Related
Mar 10, 2014
I have a macro that takes about a minute to run. I would like to add a progress bar to appear once the macro starts running. There are no loops in the macro. What are my options?
View 3 Replies
View Related
Mar 17, 2014
I have 3 different sheets with a private sub on each all labelled
Private Sub CommandButton1_Click()
The macro's runs fine on each page.
I want to put a macro on a separate sheet that i can run each of those macro's
I did initially copy the original private macro and change the
Private Sub CommandButton1_Click()
to
sub report()
But I couldn't do all 3 in the same manner. i did change each name to something different... the other 2 subs did run, but they didn't do anything except put the massage box on the end saying that "the macro has finished".
The private macros are on sheets 26, 28 and 12.
View 3 Replies
View Related
Mar 25, 2014
I have 7 different workbooks as part of my daily routine.
At present the first workbook is opened via the task scheduler, and the macro is run using the following code
[Code] .....
This then opens the next workbook and closes the current one. The next workbook then runs its macro again from a timed call
[Code] ...........
This repeats for 7 workbooks. The problem is, if a macro overruns - the whole schedule is out of sync when macro's are called depending on the time. What I would like to do, is link each macro by calling for the next one, and closing the current workbook. However, when i have tried to do this, the macro has always stopped when the workbook has been closed - the next macro doesn't run.
View 2 Replies
View Related
Oct 3, 2007
Below is the entire code that I am using. It is a simple routine which checks whether a part has started its release process or not, based upon dates. The code works and does what I want.
The problem that I have is that it is very slow, for example it takes 35 seconds to go through 530 lines items. In my (limeted) experiance, based on other VBA doodlings this slow.
View 9 Replies
View Related
Jul 28, 2008
Is it possible to run a macro from an IF command?
View 9 Replies
View Related
Oct 8, 2008
I already have a macro made named (PowerPoint) that is saved to the wookbook. I am looking for a way to have this run every 20min. I have tried several differnt things and it did not work. Here is one I found online. I only need it to run when it is open and every 20mins. as long as I have it open.
View 3 Replies
View Related
Dec 18, 2008
I have 2 workbooks (Workbook1 and Workbook2).
Workbook 1 contains a button, that calls a macro. This macro calls a macro from Workbook 2.
For this, I am using the Application.Run function.
The Macro in Workbook2 is a simple one line macro that updates cell A2 to a value of 6.
Range("A2").Value = 6
This works fine!
However, I want the the cell A2 in WORKBOOK1 to change to 6, not the cell in Workbook 2.
To add an element of difficulty, Workbook 1 could have any name (I won't know what it is, as the user could change it).
How can I get the Macro in Workbook 2 (Called from Workbook1), to update the cells in Workbook 1.
View 12 Replies
View Related
Jan 11, 2009
I have a problem with a macro in Excel 2007. It invokes
solver and creates an answer report. Please find the VB
code for macro, below.
View 7 Replies
View Related
Apr 8, 2009
How do I ask for a confirmation box before running a macro, but only one time. What I mean is some of the macros I use loop and it wouldn't be practical to click on "ok" for each time the macro ran.
So again I just need some code to tack on to the beginning of a couple of my macros that will ask me before they run but only once.
View 11 Replies
View Related
Jun 11, 2009
I have the following macro in a worksheet...and it is running very slow. There are other macros in the worksheet and they all run very well. Any ideas by looking at this code why it would be so slow in running?
View 7 Replies
View Related
Aug 10, 2009
I have a spreadsheet containing a macro to automatically sum values from week to week and display the max/min and average. This is almost fully working. The problem I have is the macro copies the sum formula down the page and doesn't stop at the last row. It always adds one or two extra rows. The formula should stop at row 77 however this does not happen and therefore the sum keeps going. Which in turn, distorts the max/min figures.
View 2 Replies
View Related
Sep 17, 2009
I have 2 files in a folder, "Main.xls" and "My Database.xls". "My Database.xls" contains the following macro in 'Module1':
View 2 Replies
View Related
Jul 23, 2014
I am trying to utilise a vba script for DNS resolution which i got from Followup: DNS Lookup and Ping in Excel - CodeProject
I have a list of IP addresses that I want to use this on, however if I test this by using the test instructions, excel does nothing, its just text in a cell, so I would like to know how would this procedure get called from the spreadsheet?
Code:
GetHostname("4.2.2.1") in any Excel cell.
or
Use: GetIpAddress("www.google.com") in any Excel cell.
View 3 Replies
View Related
Jan 12, 2007
I am trying to achieve an automated macro.
I would like my spreasheet to look at cell B2, compare this to a list of information in Sheet2 and if it matches, run Macro1
View 9 Replies
View Related
Jun 19, 2008
I'm trying to run what is a pretty basic macro when a file is closed
Sub Auto_Close()
FileCopy "C:Documents and SettingsdaveDesktopWorking olderPlanner.xls", "S:LeavePlanner.xls"
End Sub
I've checked that the Auto_Close feature is what I need, but it just doesn't seem to be running
I've tried it from clicking the x, and also File>Close, but with the same lack of success
View 9 Replies
View Related
Dec 16, 2008
I have a problem which involves calling an excel macro from another application – in this case, ruby.
$excel.Run "ActionCommands.xlsm!CreateDynamicDataSources"
Here is the simplified macro that it calls
Sub CreateDynamicDataSources()
MsgBox "Hello"
ActiveCell.Select
ActiveCell.Formula = "Hello"
End Sub
The good news is, the macro is indeed being called because the MsgBox is executing. It may even be able to read cells and send the data back to ruby or display it in a message box. The bad news is I can’t select a sheet or cell and actually write to it! When I call this macro from Excel it works as expected. How do I fool Excel (2007) into thinking it’s OK to allow these operations. There is no explicit message that says “Hey this is in read only mode” but I suspect that is what is going on.
View 9 Replies
View Related
Jul 3, 2009
I have a macro running with columns from A to H and ''infinite'' rows
+conditionnal formating and one formula for the value in column D
I'd like to add one more condition, but I can't figure how...
*I'd like to add a step to the macro on sheet1 to automatically move a whole row (a to h) to sheet2 as soon as my equation in column D find a value = 0
after each row is transfered, i'd like to sort it in a descending order on sheet2 based on the number value in column A
what to add to get this to work
Private Sub WorkSheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub 'Only run if 1 cell is changed
If Target.Column 8 Then Exit Sub 'Only run if change is in Column "F"
If Target = Cells(Target.Row, "A") Then 'Check to see if entry matches column "A"
Else:
MsgBox "Invalid entry"
Application.EnableEvents = False
Application.Undo
Application.EnableEvents = True
End If
Range(Cells(2, 1), Cells(Target.Row, 8)).Sort Key1:=Cells(2, 8), Order1:=xlDescending
End Sub
View 9 Replies
View Related
