Loop UserForm Textboxes & Copy To Cells
Mar 28, 2008
Loop sequentially numbered text boxes. I have a user form with two sets of text boxes one set named txtN109 through txtN134 the other txtC109 though txtC134. Instead of having to have
ActiveCell.Offset(c, 0) = txtN109
ActiveCell.Offset(c, 0) = txtN110
I would like to loop though the text boxes like I am the offset value.
Do While i <= 134
ActiveCell.Offset(c, 0) = “xtN”& (i)
i= i+1
Loop
Puts txtN110 in the cell. I have tried other ways but always get about the same thing.
View 2 Replies
ADVERTISEMENT
Feb 20, 2014
When I enter values in the userform textbox and press update button i need to copy whole row of data which is next to the textbox from userform to database sheet. (Copy only if data entered in the textbox).
Basically if textbox has a value in userform row 1 and it has a value copy it to database sheet if not skip and if value is in other texbox copy other rows.
The worksheet sample attached : example.xlsm
[URL] .....
View 9 Replies
View Related
May 26, 2014
I have a user form where people fill in data into text boxes. some text boxes remain hidden if the user does not need to fill in the requested field. but when the command button is submitted all text boxes hidden or otherwise are copied to clip board.
VBA in order for only visible text boxes to be copied to clip board. I was thinking of some sort of if statement around the vba to copy to clipboard but nothing i use works.
View 5 Replies
View Related
Jun 28, 2014
I have created a userform thats extracts data from a worksheet, pace a command button on the form that will send the info in textboxes to a word document.
I did attempt this but even reading how didn't make sense. I have placed book marks on my doc (RTWdoc) ready. bookmarks are named textbox1, textbox2, etc, for ease of reference so they match textboxes on userform1.
word.doc and workbook are in same folder.
View 1 Replies
View Related
Apr 17, 2008
I have a userform that loads on opening my workbook. It has a series of textboxes that allows the user to input an address. The various lines are then entered in a range (a8:a14). The issue i am having is that if you don't use all the text boxes then the address on the spreadsheet is seperated by empty cells and you have to manually sort the issue out.
I have searched around the posts and tried the sort method out and although it does put the empty cells at the bottom, the address is in the wrong order. I think i have to do something with end(xlup) i just can't figure out what though.
View 6 Replies
View Related
Feb 19, 2014
I have designed a simple user form to populate a finding tracker spreadsheet. Updating the tracker works fine.
Although I only need to update certain textboxes in the user form, I find myself having to enter the same data in every textbox so that the next row of the spreadsheet is filled. In all cases, if a textbox is not updated for the next row, then the data should copy the data from the previous row.
For example, last data Transferred from the user form are as follows:
[Heading] Col A - Col B - Col C
[Row 1] Apple - Red - 10
Assuming I would only update the textbox for Col C in the user form, the next row in my spreadsheet would look like this:
[Heading] Col A - Col B - Col C
[Row 1} Apple - Red - 10
[Row 2] (empty) - (empty) - 20
As such, I would like to add a code that allows the data (Apple and Red in Col A and Col B) from the previous row to be copied automatically and only updates Col C with the new value 20.
Oh, I should add that I have mostly Textbox values (about 20 columns) in the spreadsheet with the exception of three columns with CheckBox values although I can always repeat the checkbox fields.
View 6 Replies
View Related
Mar 7, 2008
Arised from my earlier posting in Populate ComboBox With Specific Sheet Column Range. I have the following working code below, but am having trouble finding coding examples to select specific cells from the selected row (that was found by selecting a ComboBox value)and update TextBoxes with those individual values after the UserForm has been initialized (the bold "GREEN" comment in the code below). I have been able to find plenty of references to update TextBox values to Cells, but that doesn't do me much good in this application since the User needs to verify the old data in these cells before updating them using the UserForm TextBoxes.
I was toying around with several different variations of code (none of which worked properly), so I left it out for clarity of my working code. I'll post up this non-working code as needed, because I really wanted a fresh answer...not what I was trying to do. The attached file should be sufficient to see what's going on
Private Sub UserForm_Initialize()
With Sheets("SR Information")
.Range("A2", .Cells(Rows.Count, "A").End(xlUp)).Name = "MyRange"
End With
SRnumber.RowSource = "MyRange"
End Sub
Private Sub SRnumber_Change()
Dim ServiceRequestNumber As String
Dim c As Range
Dim rngG As Range
Sheets("SR Information").Select
With Selection
ServiceRequestNumber = SRnumber.Value
For Each c In Intersect(ActiveSheet.UsedRange, Columns("a"))
If c = ServiceRequestNumber Then..................
View 4 Replies
View Related
Jun 24, 2008
I am taking a range of cells (C22:D67) on several sheets ( same cells on each sheet) 4 sheets in total, each range appears in it's own text box on the single user form.
- I would like to know if there is an easier way of doing this, and can I leave out the cells without anything in them?
The code I am using at the moment is..
Private Sub cmdSeeNotes_Click()
Sheets("Core").Activate ....
View 9 Replies
View Related
Feb 7, 2008
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies
View Related
Jul 31, 2013
So the think is that i have 197 textbox and i whant it to fill them with the range of a sheet preselected automatly with a loop.Whitout a loop i have this.
VB:
Dim e As Integere = CInt(TextBox198.Text)
TextBox1.Text = Sheets("Dia" + " " + CStr(e)).Range("A3").Value
that work, but its to slow, if i try this and also to modify
VB:
Dim e As Integer
For e = CInt(TextBox198.Text) To CInt(TextBox199.Text)
Dim i As Integer
For i = 1 To 17 [code]....
Where Textbox198.text define the start day (sheet), and Textbox199 the final day, this is highlighted.Also i dont know how to write the textbox(i).text loop, i try a lot of ways and always have problems.I tried to write like this that also didnt work out: TextBox & i & .text and TextBox+i.text
View 1 Replies
View Related
Jul 24, 2008
I have a user form that has a section of 32 text boxes that all information randomly placed inside some of them. Most of the them will be empty.
Is there an easy way to have have a macro loop through these text boxes and find their values (if they have any), and then place those values on the next available row in a worksheet?
Here is a picture of what they look like
What I'm trying to do is get the next rows in my sheet to say:
5
1
22
32
11
23
1
15
etc...
View 9 Replies
View Related
May 31, 2007
Is there a way to do something like this? The purpose is to get the value from a text box and put it in a cell...
View 4 Replies
View Related
May 10, 2009
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with:
1. I'd like the UserForm to open when the workbook opens.
2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B
3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
View 8 Replies
View Related
Jul 17, 2008
I was just wondering if there is a more efficient method. I have a UserForm that requies textboxes to be filled. I have a commandbutton1 on the form called "next" which is only enabled after all the fields have been filled. If any field is blank, I want the commandbutton "next" to be disabled. I have many UserForms so I wanted to see if there is another way than my own primitive method - I have a code for the change event of each textbox
Private Sub TextBox1_Change()
If Me.TextBox1 = "" Or Me.TextBox2 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub TextBox2_Change()
If Me.TextBox2 = "" Or Me.TextBox1 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub UserForm_activate()
Me.CommandButton1.Enabled = False
End Sub
View 9 Replies
View Related
Mar 31, 2009
I am working on creating a userform to make sure that information gets entered correctly into a spreadsheet. This is a rather large user form with numerous text and list boxes on a number of tabs. I also have a toggle box at the top of the form that helps choose what sort of data I will be needing. When the toggle box is selected I only need about half as much information and do not want users to be able to enter the rest. I am looking to enter code that changes the enabled property of the unneeded boxes to false when the toggle button is selected and back to true when it is clicked off. Unfortunately, this involves about 50 text/list boxes. Things are going to get very messy if I need to write out a seperate line for each of these items.
My question is this. I know there is a way to group these boxes and change the properties of the group as a whole in the editor, but is there a way to refer to such groups and their properties in my code.
View 9 Replies
View Related
Jul 6, 2009
Here is my case:
I have made a userform called "frmvakanties"
this form contains a certain amount of textfields in wich the user should be able to put dates (d-mm-yyyy)
the userform also contains a OK button, wich is called cmdOK.
in the the Private sub cmdOK_click it says:
Dim txtNwJrvan as date
unload me
So far no problem.
For this question i just take one of the textboxes, wich is called 'txtnwjrvan'
Now have my vb module. I wrote there: 'frmvakanties.Show'
When i run this program, I get the userform with the unfilled textboxes, fill them with a date and press OK.
this is where my problem is: after frmvakanties.show i've typed
msgbox (frmvakanties.txtNwJrvan)
I do get a msgbox, but it is empty!
I just made this msgbox to check what date it returns, since i need the entered date for further use in my script.
View 9 Replies
View Related
Jul 18, 2007
I have a bunch of TextBoxes on a UserForm, and I would like to create a Sub to clear all of them. Something like that:
For I = 1 To 10
NameBox = "TextBox_Area" & I
For Each objControl In UserForm1.MultiPage_1.Pages(1).Controls
If TypeOf objControl Is MSForms.TextBox And objControl. Name = NameBox Then
objControl.Text = ""
End If
Next objControl
Next I
But of course there is no Text method for Controls. And I cannot loop directly through TextBoxes instead of Controls. So what can I do ?
View 2 Replies
View Related
Apr 23, 2008
I have a userform with three textboxes.
1. txtStartDate
2. txtDateofBirth
3. txtAge
What I would like is for the txtAge box to be populated once dates have been entered into the other two textboxes.
It needs to be the person's age as calculated between the Date of Birth to the Start Date.
View 3 Replies
View Related
Sep 14, 2013
I am looking for codes to clear the textbox fields while the existing codes transfer the information to the execel page. I have programmed it to transfer the data to the sheet but I can't write the codes to clear the textboxes for the next entry.
I want to program the same command button to transfer the data to the sheet and clear the textboxes simultaneously.
VB:
Private Sub CB2_Click()
Unload UFH1
End Sub
Private Sub L1_Click()
[Code].....
View 5 Replies
View Related
Nov 17, 2013
I have a userform that has 3 sections. In each section are a number of text boxes which, following input of a value in the first text box in the section (master box), self populate with data from a spreadsheet.
This works apart from when I change the value of one of the first text boxes. Is there a simple bit of code that if on the change of the value in the master box will reset the 'dependent' text boxes to empty?
View 5 Replies
View Related
Jun 12, 2014
I have a Userform and 2 text boxes that require users to enter a date. I really need the users to be forced to enter the date in "mm/dd/yy" format or they cannot get passed that text box or at least an error comes up.
View 2 Replies
View Related
Jun 13, 2014
I am trying to get two text boxes on a userform to populate a third box on the form when the user inputs the data in both of the first two boxes. I am pretty sure i need to use a change event, but I am not sure how or what triggers them. so I have:
[Code] ....
but they don't work when I put data in VSShortPrem and VSLongPrem textboxes. Do I need to call them to the userform module?
View 6 Replies
View Related
Jun 27, 2014
When the user choose a customer from a combo box then i need to get some statistical results in the text boxes, such as last amount of credit-charge, last date, and amount that he has to pay us until now.
When user adds a new amount in the grey textbox then this has to be added in the previous amount.
I have the expected results of my example in my sample sheet.
View 11 Replies
View Related
Feb 11, 2014
I have a userform that one textbox takes it's value from a cell in sheet3.(k2). The format of this cell is currency. How the textbox takes the same format as the cell?
In the same userform i have a series(prcase1,prcase2..) of textboxes that i want to have currency format as the user type numbers on these.
How can i do this?
View 11 Replies
View Related
Apr 1, 2009
I have 30+ Textboxes on the form.
In the process of entering data the textBoxes get different .BackColor settings.
When the reset command button is hit the boxes stay the same colors, so I could reset them with a single command rather than 30+ lines of formatting code.
View 7 Replies
View Related
May 3, 2009
I have a userform with many comboboxes and textboxes and I am using the following code to empty those controls:
View 9 Replies
View Related
Jan 29, 2012
I have seen a lot on how to do this with a listbox, but i need to do it with textboxes. I have 30 textboxes in order and would like to have two buttons (1 For move up and 1 for move down) to move the value from the current textbox in focus (active) and swap it up or down.
View 7 Replies
View Related
Mar 23, 2009
I am trying to create some VBA code, which will average the contents of up to twelve textboxes on a Userform, and then put the average in the next one.
I have sorted this, HOWEVER.. I have a couple of problems.
The average isn’t correct Some of the textboxes may be blank, and therefore should not be included in the calculation
Here is my code
Private Sub CommandButton3_Click()
Dim results(12) As Double
Dim ave As Double
results(1) = CDbl(TextBox5.Value)
results(2) = CDbl(TextBox6.Value)
results(3) = CDbl(TextBox7.Value)
results(4) = CDbl(TextBox8.Value)
results(5) = CDbl(TextBox9.Value)
results(6) = CDbl(TextBox10.Value)
results(7) = CDbl(TextBox11.Value)
results(8) = CDbl(TextBox12.Value)
results(9) = CDbl(TextBox13.Value)
results(10) = CDbl(TextBox14Value)
results(11) = CDbl(TextBox15.Value)
results(12) = CDbl(TextBox16Value)
ave = Application.WorksheetFunction.Average(results)
TextBox17.Value = ave
End Sub
View 9 Replies
View Related
Jun 4, 2006
I've been trying for hours to populate a textbox on a userform based on a combo box. I'm including a zip of my workbook to see. (don't laugh to hard at my code, like I said I'm green...:) When you select a mix design in my form I want the next six combo boxes to populate. The way I have it now is based on one of the many examples found here, (none of which have worked for me so far, but this one said "the simplest way to do this is......") And I get an error 425 - "Object not found". I've done searches based on the error but haven't found an answer.
View 4 Replies
View Related
Nov 2, 2006
re: Validating Textbox to work on a simple form.)
View 2 Replies
View Related