Updating Records
Jun 10, 2009
I am using Excel 2007.
I have a large spreadsheet and new data is added periodically.
I have several columns of data associated with a description & date.
The data associated with each description is unique to that day.
I want to archive the older desciption data after I add newer description data.
Column B = date of the data
Column E = description (phrase)
How do I remove duplicate older rows of description data from my main spreadsheet (keep the newest descriptions rows) and save the older rows of data in a archive sheet?
My sheet has many columns from A to BU.
I have about 220,000 records with many duplicate Descriptions in column E. Each Description record has a date in the Date column B.
Records are sorted by: Description A to Z
then by: Date Newest to Oldest.
Here is an example (not actual sheet):
I highlighted the duplicate Description records in these examples that I want to update and archive.
I want to delete the older Description records from my main sheet so that only the duplicate Description records with the newest date remains like the example below.
And the older duplicate records that are removed from the main sheet I would like to save to a new sheet so that I can save a history of the Description records.
View 11 Replies
ADVERTISEMENT
Dec 3, 2011
I have these following codes. when i click button then it updates the records, like pulling data from sheets and putting it into one. thats working fine. only things is, when it update the records, then it shows whats going on behind, all updating sheets get visiable. is it possible can i just hide whats going on in the back? when i click the button msg box comes up that please wait its updating the record.
Dim Response As Integer
MsgStr = "ARE YOU SURE YOU WANT TO UPLOAD NOW?, PLEASE CONSIDER RE-CHECKING YOU INPUT!!"
TitleStr = "USER MESSAGE"
If MsgBox(MsgStr, vbYesNo, TitleStr) = vbYes Then
Sheets("Employee Data Input").Select
[Code] ...........
View 4 Replies
View Related
Jul 8, 2006
If you look in the file you will see a records sheets and a form sheet. I want to see if a record has been broken. All the times are in seconds and the distances are in centimeters. How can I find a certain row, compare and act based on an if statment?
View 2 Replies
View Related
Apr 14, 2006
I copy a table from a data dump dbf file into worksheet 1. I enter a separate column titled "Comments" and use this for status purposes. My problem is that when I refresh the worksheet, my comments don't stay attached to the rows/ records that they were originally entered for.
View 9 Replies
View Related
Aug 10, 2014
I have a range of columns i.e. 23 columns (i.e. B through X). Someone can write records in these columns (starting from B21).
Duplicates are considered the rows with similar data in columns 3 and 11. I know about the removeduplicate method and works really well but i want the duplicates not to be removed. Instead another column shall be checked for date of entry (user will entry date in format dd/mm/yyyy). The newest entry will change the value of the cell in column 4 (islatest column)to TRUE while all other records will be FALSE. This will work with the filtering of data on a pivot table on another worksheet.
View 7 Replies
View Related
Apr 25, 2014
Book1 and Book2 are workbooks that I have modified in order to protect private information.
Book1 will have 11,000 records (my example Book1 has only 100). I need to rearrange Book1 such that it looks like Book2. Book2 has 20 complete records from Book1 combined into one single row, and my example Book2 has populated 3 rows only (3 rows x 20 records, making 60 records now appear on 3 rows only).
Macro for getting Book1 to Book2? 11,000 records in Book1 will take a lot of hours to transform into Book2 unless a macro can do the job for me.
Book1.xls
Book2.xls
View 5 Replies
View Related
May 7, 2006
example of a database user form that will allow me to list records in a sheet as well as search for records in a sheet. I know excel has a built in feature for this but it is menu driven and I need something that is button driven and will allow me to resize the form layout. I was not able to figure out how to do that with the built in form.
View 7 Replies
View Related
Jun 6, 2013
I have a dataset with 5 columns. i want to identify the the max users in each zip code and the corresponding ID for it. For e.g. for zip 01105, max users are 1380 for ID 010840. I want my final data to have just these 3 values.
I tried the pivot table but it hides the ID corresponding to the MAX value.
ID Zip CityState Users
01084001105SpringfieldMA1380
01012001105SpringfieldMA1102
01003001105SpringfieldMA518
01145001105SpringfieldMA27
01384001105SpringfieldMA3
01084001107SpringfieldMA629
[code].....
View 2 Replies
View Related
Dec 16, 2009
I feel like I am losing my mind here. I have a basic SUM calculating a bunch of cells. I have done the SUM from th autosum feature as well as, just typing it is (=SUM(B1:b16)), It totals up the cells correctly, but, when I change a value in one of the cells, the sum is not updating? I have never seen this happen...Does anyone know what could be causing this?
View 3 Replies
View Related
Mar 18, 2009
In my Excel 2007 I have downloaded an Add-in (Webiress data) which allows me to receive RTD of a particular security which I then use to plot a chart. In a day there are around 15,000 changes in prices of that particular security.
The problem is that the RTD misses many prices when the market is fast and also it frequently (around 20 times per day) stops updating and then I have to clear the cell where the RTD is updated and it returns to normal, updating the prices for few minutes and then stop again.
A friend of mine told me that I have to change one Registry in Excel to tell Excel to check for a RTD every 2 miliseconds. I found this suggestion a bit strange and I have no idea how to do it.
Has anyone ever come across a RTD issue like this?
I contacted the server provided (webiress) and they said there is no problem with the updating of RTD (real time data) and the problem should be on my side.
View 9 Replies
View Related
Jun 17, 2014
I am looking for a formula to give me the top10 records from a range.
Please take a look : Top_10.xlsx
View 6 Replies
View Related
Jan 9, 2007
creating a formula to count the number of rows in a different worksheet if a cell has a value of "1" or "2" (these are the only two allowed values) AND a status of "'on track". also need to add values in other cells within the different worksheet if the value is "1" or "2" AND has a status of "on Track".
View 9 Replies
View Related
Oct 25, 2008
I have a problem in excel that is very urgent to resolve. I have a table that contains duplicate records e.g two people living at same address. I want to merge those records whose address field value is same. Find attached an excel sheet that contains the exact data and the exact output that I want. I know it requires VBA coding.
View 4 Replies
View Related
Jul 30, 2009
i have cell N1 witch is a number example "8832"
cell O1 is text example "state street"
now i have A1 thur A10 as an address "number"
now E1 thur E10 is street address "text"
i need to take n1 match it to A1-A10
then take that row number and see if E1 of that row numbers matches
O1 if it does that that row numer and get g of that number if not keep checking to i find a match
View 6 Replies
View Related
Aug 26, 2009
I have 2 workbooks Mater and Update. I have a VBA code that compare between the two files column by column and update the Master file according to the Update file ( the code below).
Now my user want to see in a separate worksheet ("changes") only the changes - Date and time of changes at column A , old value at column B and new value at column C ........
View 9 Replies
View Related
Aug 26, 2009
I need to count how many rows of records there are on the page labelled Data.
this is what i wrote...
=COUNT(Data!A3:A1995)
doesn't seem to be working correctly
View 2 Replies
View Related
Jul 11, 2006
I have 2 worksheets. Sheet 1 has in column B a single ID number in every cell, Sheet 2 in column A can have multiple numbers in a cell (e.g. "55517 / 55518 /55519" written in one cell.)
For every row in Sheet 1, I need to find the ID in Sheet 2 and add in column C in Sheet 2 the corresponding cell value found in column E on Sheet 1.
By doing this formula, when I am in Sheet 1, I can already find the row number in Sheet 2, if it exists.
=IF(ISERROR(MATCH("*"&B2&"*",Sheet2!A:A,0)),IF(ISERROR(MATCH(VALUE(B2),Sheet2!A:A,0)),"NONE",MATCH(VALUE(B2),Sheet2!A:A,0)),MATCH("*"&B2&"*",Sheet2!A:A,0))
I suppose I can then move to the destination cell by using OFFSET.
This is all I have been able to figure out conceptually.
I think it makes more sense for this to be in VBA. Especially the 'writing part' I don't know how to do. After the OFFSET part, how do you tell Excel to write something to that cell?
Because several IDs from Sheet 1 can occur in Sheet 2, it would have to add like REPLACE at the end (ie. len(cell)) "+result", so they get summed if there are multiple finds.
I am also not sure the MATCH sentence above can be translated as a Macro, or whether it is even an efficient way.
And finally, it has to loop (repeat for every row in Sheet 1), which must require VBA.
View 9 Replies
View Related
May 20, 2008
I've a worksheet with a list of destinations and country code as well as Y/N fields.
I want to create a solution such that when I change the yes/no field for one destination, all other destinations with the same country code will follow.
I have attached my work file below.
View 6 Replies
View Related
Nov 7, 2007
Is there a way to insert a cell/row, and add data to one page/tab, and have it automatically insert a cell/row and add the data on another page/tab?
Excel 2003 is the version I am using.
View 14 Replies
View Related
May 23, 2008
I update graphs/charts everyday. I've been looking at ways of updating a lot of charts in 1 action.....
What would the formula be to have the range of the chart (ie =Data!$BS$1188:$BS$1201) to get the row numbers, not the row, from numbers entered elsewhere on a data sheet (ie =Data!$BS$1188:$BS$1201)
As a lot of the time I use the same number range but on different rows and sheets.
View 12 Replies
View Related
Dec 7, 2009
I have created a series of numbers using a column 'n' and 3 cells for Start value, End value and increment, this is thwe formula: .....
View 9 Replies
View Related
Apr 11, 2008
if it would be possible to update all the links in a workbook at once. For example, say I have a worksheet which is linking to a file named something like 4-6-08 (1) and 4-6-08 (2) and so on with the number in brackets being from 1-21. Now say I have the same thing for 4-7 and 4-8 and 4-9. Now I want to change the links to point to 4-10,11,12,13 instead of 6,7,8, and 9. But still there are 21 copies of each sheet. Is there any way to change all the sources at once so all the 4-6's could become 4-10's and 4-7's to 4-11's?
View 12 Replies
View Related
Mar 18, 2009
I have made a series of of udf's and used them without a problem in my worksheet. One of the variables used by udf's, " commission " is a named range on the "vrs" sheet in my book. All was working fine, all the udfs updated whenever i changed the value of "commission" by directly entering a new value in the cell referenced by "commission" I then wrote sub to call an input box wich collected a value for commission and put it in the ranged cell. Since then, of the 4 columns of data that commission acts on only 3 now update automatically. The recalcitrant 4th column will only update if I select the cell, place the cursor anywhere in the formula and press enter.
View 3 Replies
View Related
Jun 8, 2009
I have written some code that populates a list box with data, and have allowed data to be deleted from the list box if a line of data is double-clicked, with the data below the deleted row being updated to remove the empty row, etc. All works fine except that, when I force the list box's 'selected' line to be the one below the last entry (as if you were selecting the next empty line with the mouse) and the code completes, you cannot click on the form and move it around, nor can you access any other of the form's controls, until you click inside the list box.
Apparently, forcing the line selection in the list box (to simulate someone clicking on a row in the list box) is what's causing the problem. I need to force the selection because the number of data lines in the list box is more than can be shown in the list box, therefore I need a method to automatically scroll the list box to show the next available line in the list box.
View 2 Replies
View Related
Dec 30, 2009
I have the folowing vba function that i use to check the existance of files but when the workbook is refreshed, the formula doesn't update. It's only updated when i double click it's cell.
View 2 Replies
View Related
Aug 19, 2007
I have links in one workbook to a series of other workbooks. Using Excel 2002. I am making selecting changes in the source workbooks and not automatically recalculating the workbook. I know what is changing and am just recalculting that by clicking on the cell and going to the end of the formula and pressing enter.
The problem is that when I go into the master workbook to which this data is linked, it seems unwilling to update the data - and it sounds like this may be because I didn't recalculate the entire workbook.
Is this in fact what happens? Any way around it. Recalculating the workbooks in which the source links are found would take lots of time and I'd rather avoid that.
View 9 Replies
View Related
Sep 10, 2008
I need to calculate value in a column (expiration date) based on other two columns (Approval date, Plan Type) for each row in a table.
View 9 Replies
View Related
Feb 13, 2009
Is there a way to disable updating to the screen but have a message displayed to the user while a macro is running? Something like a userform displayed on the screen or a message in the status bar. I vaguley remember you could "print" message to the status bar in LotusScript, wondering if there is something similar in Excel.
Application.ScreenUpdating = False
"the macro is running, hang tight"
...macro code in here...
Application.ScreenUpdating = True
View 9 Replies
View Related
Dec 10, 2009
I have a userform that displays data related to a given stock in textboxes and lets me manipulate other data with command buttons. it works fantastically, except the dynamic data on the sheet does not update dynamically in the textboxes.
i have a combo box from which i select a symbol, data is pulled from the sheet and populates the text boxes. that is accomplished with a sub. there are 800 symbols. i mention that because i can't just set the ControlSource to a specific cell. I tried several different ways of referring to the cell, using .Cells and vlookup but i mostly just got errors. then i tried to do it with code (heh) here's a sample:
SecurityName.Value = Cells(r, 5)
ParityBid1.Value = FormatNumber(Cells(r, 12), 2)
ParityAsk1.Value = FormatNumber(Cells(r, 13), 2)
ParityLast1.Value = FormatNumber(Cells(r, 14), 2)
LocalVolume1.Value = FormatNumber(Cells(r, 10), 0)
Again, it pulls the data fine, it just doesn't update. Anyone who can help will receive total consciousness on their deathbed.
View 9 Replies
View Related
Jan 21, 2007
I've been trying for a while now but I can't do it so I was wondering if anyone could do it:
1) I am trying on the "customer detail page", in the " date due" column automatically update with the book/DVD.
The database has been shortened drastically to be able to be able upload
View 9 Replies
View Related
