Matching Records With VBA

Jul 11, 2006

I have 2 worksheets. Sheet 1 has in column B a single ID number in every cell, Sheet 2 in column A can have multiple numbers in a cell (e.g. "55517 / 55518 /55519" written in one cell.)

For every row in Sheet 1, I need to find the ID in Sheet 2 and add in column C in Sheet 2 the corresponding cell value found in column E on Sheet 1.

By doing this formula, when I am in Sheet 1, I can already find the row number in Sheet 2, if it exists.

=IF(ISERROR(MATCH("*"&B2&"*",Sheet2!A:A,0)),IF(ISERROR(MATCH(VALUE(B2),Sheet2!A:A,0)),"NONE",MATCH(VALUE(B2),Sheet2!A:A,0)),MATCH("*"&B2&"*",Sheet2!A:A,0))

I suppose I can then move to the destination cell by using OFFSET.

This is all I have been able to figure out conceptually.

I think it makes more sense for this to be in VBA. Especially the 'writing part' I don't know how to do. After the OFFSET part, how do you tell Excel to write something to that cell?

Because several IDs from Sheet 1 can occur in Sheet 2, it would have to add like REPLACE at the end (ie. len(cell)) "+result", so they get summed if there are multiple finds.

I am also not sure the MATCH sentence above can be translated as a Macro, or whether it is even an efficient way.

And finally, it has to loop (repeat for every row in Sheet 1), which must require VBA.

View 9 Replies


ADVERTISEMENT

Look Up For Matching Records

Jul 30, 2009

i have cell N1 witch is a number example "8832"
cell O1 is text example "state street"
now i have A1 thur A10 as an address "number"
now E1 thur E10 is street address "text"
i need to take n1 match it to A1-A10
then take that row number and see if E1 of that row numbers matches
O1 if it does that that row numer and get g of that number if not keep checking to i find a match

View 6 Replies View Related

Matching Records In Two Workbooks

Feb 3, 2010

In Excel 2003, I need a macro to do the following:

For each record in column F (starting at row 2) (workbook: CATS LITTERS LISTS AS AT 01 FEB 10.xls) (worksheet: RAKE)

Find a matching record in another open workbook (workbook: DOG TRAINING v 3.xls) that has multiple worksheets as

follows: ...

View 8 Replies View Related

Flag Non-matching Records

Nov 17, 2006

Our school system is trying to clean up student records. They have a demographic worksheet of hundreds of records. Each student has a student ID number. We are trying to flag students whose ID numbers in 9th grade do not match an ID number for 10th grade. so we are left with only students who have matching ID numbers for both 9th and 10th grade. We are trying to find the right function(s) to make this work without VBA. I am attaching a small sample file

View 7 Replies View Related

Find Non Matching Records In A List?

Apr 10, 2014

I have a list for example...

Ian
Andy
John
David
Ian
Andy
John
David
Max

I want to search or filter the list and find the only non matched record in the list and put this in another sheet ie max as this is the only unique name in the list, all the others are matched. Everything I have tried eg filter for unique records returns ian andy john david max, which is not what I want.

View 4 Replies View Related

How To Find Matching Records That Appear On Two Lists

Oct 14, 2011

I have two worksheets each of which includes a left column of unique email addresses (at least, unique within each lsheet)

The data on each sheet is structured identically. What I want is to generate a list of records that appear on both sheets.

View 2 Replies View Related

Finding Matching Records From Two Tables

Jul 14, 2014

I have two tables, both contain a column of ID numbers and a column of addresses.

I would like a method to match the IDs from table1 to those of table2 - if no matches are found, search for matching addresses, if a match is found then output the ID in table1, the address, and the corresponding ID in table2.

If still no matches are found, output the ID and address from table1 and indicate that it didn't match.

Then I want to check table2 records - i.e. search for matching address between the records and output the table 1 ID, address and table2 ID were partial or no matches are found, as above.

View 3 Replies View Related

Merging Two Sheets Overwriting Matching Records?

Apr 16, 2013

I have this sheet, which is just an example (the actual one has many more records).
subset.xlsx

I received this sheet (again, example)...
new.xlsx

I need to add the new sheet to the old sheet, so that they are merged into one sheet. Also, if the same "LOC" appears in both sheets, I need to overwrite all the records for that "LOC" in the old sheet with the records from the new sheet.

View 3 Replies View Related

Parse Multiple Files For Matching Records.

Jun 16, 2006

I need to use a macro to import data from an unknown # of order files to my master spreadsheet. My master spreadsheet & my order files contain a unique po number that can be used to find matching records. When the macro is ran & a match is found it needs to import the all data that to the master spreadsheet & updated the "processed" column for the record found. Also, all the lines in the unprocessed order files should be matched up. If a record is not matched, a warning needs to be displayed. If the record has already been processed, it just needs to be skipped. Attached is an example master spreadsheet & an example unprocessed orders spreadsheet. If at all possible, please split the unprocessed orders into separate files when testing the final product. The part that I will struggle with the most is looping thru separate files.

View 5 Replies View Related

Adding Search Function To Delete Matching Records..

Jun 1, 2009

I'd like to do is click the delete button and when clicked, it will search for matching records in column A & B and if they match... I'm thinking the code for that is <> but I'm not sure, then delete that record, and shift the cells up. Do this until the search results are empty below the delete button. Like I said, it's probably more understandable to look at the workbook.

View 5 Replies View Related

Sort Multiple File Data & Copy Matching Records To New File

Feb 13, 2008

This is a sample of the data with which I am working. I know that a macro can do what I need, but I am only versed in Excel formulas and not that much programming. I need to be able to first sort the data by Column C ("Element Type"), then by Columns E, F, G ("Year", "Month", "Day"). Then, I need to be able to copy all rows that have the same "Element Type" and "Year" to a new file, using the same header from the original spreadsheet on each new spreadsheet - doing this multiple times until the end of the file is reached.

Ideally, the new files would have a strict naming convention: XXXXXX-ZZZZ (YYYY).xls, where the X's are the value of the "COOP Station ID" in Column A, the Z's are the "Element Type" from Column C, and the Y's are the "Year" from Column E. If this theoretical macro were run with the Sample Data file I provided, it should result in the creation of five new workbooks. Is there a way to write a macro to do this, or at least something similar

View 3 Replies View Related

Find Duplicate Records Based On Multiple Columns But Keep Records

Aug 10, 2014

I have a range of columns i.e. 23 columns (i.e. B through X). Someone can write records in these columns (starting from B21).

Duplicates are considered the rows with similar data in columns 3 and 11. I know about the removeduplicate method and works really well but i want the duplicates not to be removed. Instead another column shall be checked for date of entry (user will entry date in format dd/mm/yyyy). The newest entry will change the value of the cell in column 4 (islatest column)to TRUE while all other records will be FALSE. This will work with the filtering of data on a pivot table on another worksheet.

View 7 Replies View Related

VBA To Rearrange 11000 Records Into 550 Rows (20 Records Combined Into Single Row)

Apr 25, 2014

Book1 and Book2 are workbooks that I have modified in order to protect private information.

Book1 will have 11,000 records (my example Book1 has only 100). I need to rearrange Book1 such that it looks like Book2. Book2 has 20 complete records from Book1 combined into one single row, and my example Book2 has populated 3 rows only (3 rows x 20 records, making 60 records now appear on 3 rows only).

Macro for getting Book1 to Book2? 11,000 records in Book1 will take a lot of hours to transform into Book2 unless a macro can do the job for me.

Book1.xls
Book2.xls

View 5 Replies View Related

Userform Database: List Records In A Sheet As Well As Search For Records In A Sheet

May 7, 2006

example of a database user form that will allow me to list records in a sheet as well as search for records in a sheet. I know excel has a built in feature for this but it is menu driven and I need something that is button driven and will allow me to resize the form layout. I was not able to figure out how to do that with the built in form.

View 7 Replies View Related

Compiling Partially Matching Data Into Matching Rows With Macro

Jan 20, 2013

My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.

When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.

I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).

for example:

p1
data
data
data
data
p2
data
data
data
data

[Code] .....

needs to become:

p1
data
data
data
data

[Code] .....

I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).

View 5 Replies View Related

Bank Reconciliation - Many To One Matching And Partial Cell Matching

Nov 19, 2009

programming 2 macros in a bank reconciliation sheet I am trying to create.

Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.

The following two situations can occur and which need to be covered with a macro.

Many to one matching
When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.

Partial cell matching
In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.

View 12 Replies View Related

Matching Two Tables - Copying Data For Matching Value?

Feb 27, 2014

I have two tables, Table1 one has only customer codes in it, and I have Table2 with plenty of customer codes and those customer name, surname, age, location...

And I want to match and copy each of those customer codes in Table 1 all the information which is on Table2

Table 1:
50025
50026
50086

Table 2: Considering that name, age and location is each in separate cell

50025JohnSecond25Location 1
60085EmilyThird 20Location 2
45454Wilhelm Fourth35Location 3
10000RoseFifth 60Location 4
50086JohnySixth 45Location 5
65501JacobSeventh18Location 6
50026Jackie Eighth22Location 7

And the outcame should be that it finds the value from Table1 in Table2 and copy's information in Table 1 like this:

50025 JohnSecond25Location 1
50026 Jackie Eighth22Location 7
50086 Johny Sixth 45Location 5

View 2 Replies View Related

Copy Matching And Non Matching Data Into New Worksheet

Feb 20, 2014

I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.

Matching data will be in sheet "Match" and vice versa.

Data are present dynamically.

View 1 Replies View Related

Align Matching Row Values Column And Remove Non-matching Row Values?

Jan 27, 2014

see attachment below for easier comprehension of what I need to be done. Note that I have around 20 subjects (2 in example) and about 15000 values per subject (5 per subject shown) Basically, I want matching rows to be aligned (see grey) and non-matching rows to be deleted, throughout the 20 or so subjects.

Exemple.xlsx

View 6 Replies View Related

Matching Cell Formats Based On Matching Cell Values

Jan 28, 2010

I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.

I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.

View 9 Replies View Related

Getting Records With MAX Value?

Jun 6, 2013

I have a dataset with 5 columns. i want to identify the the max users in each zip code and the corresponding ID for it. For e.g. for zip 01105, max users are 1380 for ID 010840. I want my final data to have just these 3 values.

I tried the pivot table but it hides the ID corresponding to the MAX value.

ID Zip CityState Users
01084001105SpringfieldMA1380
01012001105SpringfieldMA1102
01003001105SpringfieldMA518
01145001105SpringfieldMA27
01384001105SpringfieldMA3
01084001107SpringfieldMA629

[code].....

View 2 Replies View Related

Getting Top 10 Records From A Range

Jun 17, 2014

I am looking for a formula to give me the top10 records from a range.

Please take a look : Top_10.xlsx‎

View 6 Replies View Related

To Count Records If Value = 1 Or 2

Jan 9, 2007

creating a formula to count the number of rows in a different worksheet if a cell has a value of "1" or "2" (these are the only two allowed values) AND a status of "'on track". also need to add values in other cells within the different worksheet if the value is "1" or "2" AND has a status of "on Track".

View 9 Replies View Related

Combining Records Together

Oct 25, 2008

I have a problem in excel that is very urgent to resolve. I have a table that contains duplicate records e.g two people living at same address. I want to merge those records whose address field value is same. Find attached an excel sheet that contains the exact data and the exact output that I want. I know it requires VBA coding.

View 4 Replies View Related

VBA Code That Records The Changes

Aug 26, 2009

I have 2 workbooks Mater and Update. I have a VBA code that compare between the two files column by column and update the Master file according to the Update file ( the code below).

Now my user want to see in a separate worksheet ("changes") only the changes - Date and time of changes at column A , old value at column B and new value at column C ........

View 9 Replies View Related

Count Records In Row

Aug 26, 2009

I need to count how many rows of records there are on the page labelled Data.

this is what i wrote...

=COUNT(Data!A3:A1995)

doesn't seem to be working correctly

View 2 Replies View Related

Updating Records

Jun 10, 2009

I am using Excel 2007.

I have a large spreadsheet and new data is added periodically.

I have several columns of data associated with a description & date.

The data associated with each description is unique to that day.

I want to archive the older desciption data after I add newer description data.

Column B = date of the data
Column E = description (phrase)

How do I remove duplicate older rows of description data from my main spreadsheet (keep the newest descriptions rows) and save the older rows of data in a archive sheet?

My sheet has many columns from A to BU.

I have about 220,000 records with many duplicate Descriptions in column E. Each Description record has a date in the Date column B.

Records are sorted by: Description A to Z
then by: Date Newest to Oldest.

Here is an example (not actual sheet):

I highlighted the duplicate Description records in these examples that I want to update and archive.

I want to delete the older Description records from my main sheet so that only the duplicate Description records with the newest date remains like the example below.

And the older duplicate records that are removed from the main sheet I would like to save to a new sheet so that I can save a history of the Description records.

View 11 Replies View Related

Change All Records With Same Corresponding Value

May 20, 2008

I've a worksheet with a list of destinations and country code as well as Y/N fields.
I want to create a solution such that when I change the yes/no field for one destination, all other destinations with the same country code will follow.
I have attached my work file below.

View 6 Replies View Related

Userform To Add / Edit Records

May 1, 2013

I've been trying to resolve an issue with the userform that i created. It adds new records to the sheet "Data" but i can't seem to add a search/edit function to it.

It could be either a combobox with the existing Project Id's or a text box + a control button, so a user could enter Project Id and hit a button.

The spreadsheet example is attached : Project Entry Form.xls

View 9 Replies View Related

How To Filter And Delete Records

Jan 20, 2014

I am new to to VB Scripting, filter the records. In the attached file there are multiple records which needs to be filtered. Once all the records are filtered, i want to delete the entire row of that record(s). I want to filter column 'F' with the values mentioned in Sheet2. I tried recording a macro, but it is not allowing me to do so as the macro has some limitations. The search and delete row loop The main purpose is to delete the row of the value, if not found, move on to next value in Sheet2.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved