I am trying to create a user pop-up box that can accomplish the following:
a. Pop up box that requests an input for a particular machine number, type of error and also a particular calculation type (STDEV,Average,etc).
b. The result will be displayed either in a tabular format or if applicable, a chart
I have 10 worksheets where each worksheet is a different mahcine ID. Contained within the worksheets is various data-sets(Data listed by week). I am trying to enable my mangers ability to not have to look through my data or choose a worksheet within my workbook. I would rather have a input screen that would give him a choice.
I have been tasked by the company I work for to come up with a simple to use interface that can be used by someone with little understanding of excel to set the autofilters to certain settings.
So here is what I have:
2 sheets (each with the same number of columns but different data which corresponds to good and no-good)
Each column has an autofilter but only two on each sheet need to be set.
One filter controls valve type (of which there are 10) and the other controls running condition (startup and normal)
Now my employer wants something that is basically idiot proof so that someone can simply open up the excel file, input the valve type and running condition, and be rewarded with only the corresponding data and charts. Now the filters are already in place, the charts already exist and the only thing left is the user interface.
I've been trying to modify this code in several ways but I can't figure it out, I'd like to
a) use different sections for the email generation where the email address/surname/forename/location are in my user database
b) have a popup screen appear for the body of the email text, I don't like the idea of my secretary having to go into the code to change the text
c) another popup box requesting an email identifier that will set a 'flag' in the Email Information column to show they've had that email and (this may be ambitious) to record the body of the email text somewhere that I can review so there's a record of what's been sent out
This is the code
Dim oXlWkBk As Excel.Workbook ' Excel Work Book Object Dim oOLApp As Outlook.Application Dim oOLMail As MailItem Dim lRow As Long Dim olMailItem
Indicate that a user-defined function can only be based upon the calculations that can be placed in a single cell. If you have too many calculations to put them into a single cell, e.g., an entire page of calculations based upon a few starting parameters that eventually yield a single value, then how do you reuse this entire page of calculations?
Is there another Excel mechanism that allows an entire page of calculations to used as a stored procedure?
I often need to retrive info from SAP and fill in an excel document with it. Is there a book or a web page where I can find macros that will help me do that?
In order to beutify my prog's interface, i would like to open the Excel file(active VBA) with the worksheet in the minimized background or hide, i.e. only the Userform or a Dialog window, from the right beginning on! as if it was a standalone VB main interface.
I have one workbook with two worksheets (Jan-JUly and Aug-Dec). I am using a userform to add data into worksheet ("Jan-July"). But I do not have any clue - How do I update the other worksheet (same data like name,join year etc)worksheet("Aug-Dec") at the same time. I used two worksheets because worksheet doesn't support 370 columns, and to make my life easy. UserForm add data into Column A to M (worksheets Jan-July), rest is done manually. I have also attached the file.
Private Sub dataAddButton_Click() Dim dataCheck, eMsg As String Dim strLastRow As Integer Dim x As Double strLastRow = xlLastRow("Jan-July") 'get Last Row With dataInput 'dataInput name of userform If (.fNameBox.Value <> vbNullString And .fNameBox.Value <> vbNullString And .joinYearBox.Value <> vbNullString) Then 'textbox validation value can not be empty......................
I'm closing in on the final stage of a large project and I've run into a road block. The following line of code is preventing my users from being able to select specific page ranges when using the Print Entire Workbook option in the print menu.
[Code] .....
I've attached the latest version of my form (with significant support by jaslake) to explain what I'm attempting here. The attached form has several macros that activate upon open; including a user form. The password for the workbook/worksheets/VBE is "j".
I am working on a workbook that contains drop-downs in various cells. The source for these drop downs are several Named Ranges on a tab named 'Drop Downs'.
I am locking the whole spreadsheet down so that people are not messing with the format, etc. (which is the current problem). So I don't allow people to add/delete rows, etc.
I am trying to think of a good interface to allow users to modify the entries in each drop down list (i.e. they may need to add a person to the "Resources" Range which feeds into a drop-down box elsewhere).
So, people should be able to add/delete items. I was thinking I would put a little 'X' next to each entry, such that when pressed - it would delete the corresponding entry. (Using the Assign Macro on a Text Box). However, I have to assign each 'X' a method to call - and I can't pass in an argument - so if I assign them all the same macro name - I won't be able to figure out which one was pushed. And the number of 'X' will be dynamic, so I can't hard code a bunch of functions. I don't really have a good idea for allowing additions yet (other than a button that prompts for the name and then adds it in).
I guess I could just use a Form that allows editing of the data (that would be easy and powerful to do), but I don't really want to do that - I want it to be editable within the excel spreadsheet itself.
I'm writing a program on VBA for Excel and I've succeeded in just displaying the Userform when opening the file. I have set the ActiveWindow.Visible option to False and the Application.Visible one to false as well so that i only have the user form displayed.
However, if i try to open an excel file via "My Computer", the file doesn't open. I also noticed that when I was leaving the application.visible option to True, i couldn't access the application while the userform was running. I think i need to do something with an event, but i can't find the event corresponding to opening a file oustide Excel.
I built a web form interface which I use to adjust orders on a web-based system our company uses.
The code I have looks at a sheet, checks if the line needs adjusted, makes adjustments as needed, and then clicks a box for lines needing ordered.
Here is the code I use:
Sub Adjustorder() Application.ScreenUpdating = False Dim ie As Object t = ThisWorkbook.Sheets("Adjust").Range("C3").Value 'checks for valid orders to adjust If t = 0 Then MsgBox ("No Skus to add"): Exit Sub Set ie = CreateObject("InternetExplorer.Application") With ie
This all works fine, but the amount of lines can be anywhere from 1 to 11,000. The fewer the amount of lines needed to loop through, the faster it does each line. With 11,000 lines it took nearly 1 second per line. With 200 lines it took 2 seconds for all of them.
I am trying to create a way to protect and unprotect all sheets and the worbook by means of a Userform pop up interface.
I have managed to create the Userform but what the code will look like and where to place the VBA code that will make it work, Also i would like to automatically save the sheet/s as i switch between them. so that any updates made to the sheet will be automatically saved when i move to the next sheet and also when i protect or close the workbook.
I have an excel file with multiple sheets. I want my HR team to update that file, but one user shouldnt see the entries of other users. I want to make a consolidated file out of three files. This excel template is for salary input.
I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
I am trying to check a user input to see if the user has entered the date correctly. I am using the code below but it keeps giving me a "Type Mismatch" error.
An Excel file named CLEARING is availble in thr central server system. it will be accessed by 5 or 6 staffs from some other systems what i need is when one person accesses/edits this file the others should not even able to open in the read only file ,when the file is saved and closed ,then only the next person should access it
I have a workbook that is used to track overtime hours worked through the year. I've received some help from users on this forum, and others, to create the necessary macros and formulas to allow a supervisor to make use of the form; however, the workbook is also used to track those that wish to volunteer to work overtime each weekend. The sheet has a list of names for the employees on each shift, then a column to allow a "Y" to be placed under the date - designating them as a volunteer for any overtime available. I've found this spreadsheet (attached - from this site) that will allow individual users to access the workbook and have unique passwords for each. I don't completely understand how it works, but I feel it may be a start to getting what I want.
Essentially, once the user selects their name and inputs their password, I'd like the workbook to be opened and then allow them to only manipulate the row associated with their name. That row will change from week to week, so specific numbers will not be able to be used, but their name will be the same as the name used in the logon.
I feel like I'm asking for a lot here, so just some initial guidance on whether this type of thing is possible would be an acceptable answer.
if you look at attachment, in Cell J2, if cell I2 is greater than 2 minutes but less than two minutes, the I need the value of I2 in Cell J2 otherwise 0:00:00 then K2 between 3 & 4 Mins and so on.
I have attached a sample file. All the data is inserted into this file via a text file, except one column "G". Someone in this forum was kind enough to help me in being able to include the city name 'G' to a parcel number 'A'. However, the page is constantly trying to complete 'Calculations' and won't let me do anything without first hitting 'Control Break'.
This is fine except that when I try to save the file into .txt, I don't have the option of 'Control Break' and I have to end up closing the file. As the 'real' file has over 100,000 rows, nothing happens very fast. I have tied changing the 'Calculation Options' but that doesn't seem to change anything.
I'm working working with this spreadsheet that is moving incredibly slow. Every time I enter anything, it takes anywhere from 10 seconds, to a couple minutes to calculate and let me proceed. It is a pretty big file (4.60 MB), but I also work with another spreadsheet that is a little smaller (2.95 MB) that has never taken more than a fraction of a second to calculate anything. What could I do to spead up the spreadsheet?
Does anyone know of a site or some code that can make changes to add some items to the status bar calculations?
Such as right now you have Sum, Count, Count Nums, Max, Min... just to name a few.
I'd like to be able to add some other ones down there if it can be done. I'd like to count #N/A's or possibly sum only positive numbers? I can do it with a quick keyboard shortcut and message box with a macro, but I'd like to just be able to highlight a range and have it show up like sum or the others do.
im in the process of designing a userform but it needs to have some calculations in it, and im lost on how to do it if anyone can help
ie
in textbox1 there is a value of 5 and in textbox2 there is a valuve of 10 and in text box 3 i want to appear textbox1 multiplied by textbox2 so 50 should appear
this is a basic example but as soon i have mastered that i can adapt everything else to my userfom
will the above be done automatically as soon as i enter values or would i have to "make the calculation" via a button or something
and also i want to have a enter button or something like that that copies the data that i have put in the various text boxes to the excel spreadsheet and clear the userform cells
phew thats best i can explain any questions just reply to this post as per the norm
I have inventory... with starting product at a certain cost, received product at a new cost, and used product. I want to assume that we are using FIFO.
What I need is a total cost (what I have paid) for what is sitting in my freezer.
Column A is START (5) Column B is RECEIVED (6) Column C is USED (2) Column D is END (9) or (A1+B1-C1) Column E is OLD COST ($12.20) cost per unit of those 5 Column F is NEW COST ($13.50) cost per unit of the 6 i got in
So I need in Column G a FIFO formula for total cost of what I have in the fridge.
can i hide all calculations inside my excel document? I wish to provide some excel worksheets but must protect the calculations performed for privacy reasons. I would still like to enable clients to sort tables, change pivot tables, etc but not to see what calculations are used.
