I have an spead sheet with 9 sheets 1 master and 8 sub sheets. The master sheet runs for col A to AV and the it can have x amount of rows. At the moment i use the following but this takes an age.
View 9 RepliesI'm looking to do a check on every row after I set an autofilter. Here's a scrubbed version of what I have so far.
Sub test()
max_x = Worksheets("Data").Range("B1048576").End(xlUp).Row
For datarow = 3 To max_x
If Worksheets("Data").Cells(datarow, 4) = "Wire" Then
Worksheets("Data").AutoFilterMode = False
[Code]....
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedMacro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedI have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
text
1
text
text
[Code]....
For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,
Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")
For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c
i have a problem with a nested loop:
it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.
am i doing something wrong?
dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================
Sub new2()
Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant
r = 1 ..................
Can't seem to figure out why my Do Loop keeps giving me an Error of "Loop without Do".
View 14 Replies View RelatedI have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3
here is my main loop A1 = 5000
and second loop need to run inside the this loop
Sheet1.Activate
i = Range("A1")
For b = 1 To i
If Cells(1 + b, 3).Value = "P" Then
Cells(1 + b, 29).Value = 1
Else
If Cells(1 + b, 3).Value = "S" Then
Cells(1 + b, 29).Value = 2
Else
If Cells(1 + b, 3).Value = "C" Then
Cells(1 + b, 29).Value = 3
End If
End If
End If
Next b
I have loops working in other loops. The macro is almsot working well. It does the calculation i want but it fails to stop a loop, because of that, the macro can't run the next main loop (c), which is to move to the next cell where the calculations must be run.
I attach a file. the troubleshooting macroation is Sub Itiration.
The code of this macro are bellow. Basically, the loop using d as counter run into an endless loop. I don't how to stop this loop without affecting the results which are calculated correctly.
Sub Itiration()
Dim CurCell As Object
Dim TempSum As Double
Dim d As Integer
For c = 3 To Cells(3, 4)
If Cells(11, c) > 0 Then
For i = 1 To Cells(10, c)
Do
Going through a loop, I am trying to load pictures into an image box (or alternatively into a label) one by one i.e. going through the loop the first time, I want to load picture 1, then on the second loop, picture 2 and so on. A bit like an automated slide show.
I have written a simple loop and have used the loadpicture function to load the picture into the image box. When the code runs, the image box only gets populated after the last run through the loop. I have tried using application.screen updating function and the image.activate function without success. It is a simple bit of code and I expect an easy problem to solve if you know excel vba well.
My code below goes into an infinite loop, with culprit line shown in bold and underline...
View 4 Replies View RelatedI am parsing 15,000 files from a network server. The files are all the same format and length. The problem is that the first few iterations of my loop run fairly quickly, 7 to 9 seconds a case, but after only 300 iterations I'm up to 60 seconds a case. How do I keep the last iteration running as fast as the first iteration? I've included the main loop of my parsing routine below.
Sub Fill_Summary_Tabs() 'fills out the Datapack and JMP tabs
Application. ScreenUpdating = False 'turn off screen updating for speed
Call PrepImporterTab 'formats the Importer Tab so that everything runs smoothly < 1 second
Dim fs
Set fs = CreateObject("Scripting.FileSystemObject") 'part of the filename test
For N = StartingCase To EndingCase '***** Start of the Parsing Loop *****
Sheets("Setup"). Cells(20 + N, 1).Value = Time 'Print the start time of each case....................
auto filter options in excel. For some reason it is only sorting up to row 140.
View 14 Replies View RelatedSay you have a long list of data, and you go to Data menu --> Filter --> AutoFilter
And then you want to use the Custom AutoFilter. Here's a screenshot:
[url]
Is there any way to do MORE than two autofilters?
I have a list of item numbers in a column which is Autofiltered. I can go to the autofilter drop down and then to custom and select two item numbers to allow through the filter, however I have about ten item numbers that I want to allow through the filter.
View 10 Replies View RelatedIs it possible to have multiple instances of autofilter on a single worksheet? The two autofilters should not be related to each other and are on different sets of data (in different rows as well as columns but in the same worksheet).
View 2 Replies View RelatedI have a situation - where I have a table and a "eSubtotal" cell that basically shows the subtotal value when Autofilter is ON and a SUMIFS calculated value when Autofilter is OFF. I have written this in the Selection change event of the sheet.
For this purpose, I have perform a regular check of AutoFilterMode = true or false and based on this result, I change the formula in the cell, eSubtotal.
Now the challenge is, I don't want to apply SUBTOTAL formula when AutoFilter is ON but there is no filter in any of the columns. I want to keep the SUMIFS just like that in this case.
So far, no good luck..
The following the code from the macro recorder. Is there a better way to execute this task in proper VBA code?
How do you add an [If...Then] critieria when 0 or 0.00 are not found, then continue to search for the next criteria, Non-Blanks?
I have 2 more questions within this .....
When I run the following code, it just returns records that matches "Commonwealth" and not a single record with "State". What am I doing wrong?
i am trying to filter data based on more than one criteria (8 to be precise). I have some data in one worksheet and i need to transfer it to other worksheets depending on certain criteria. for example if cell A1 has A or B then it should go to "temp1" spreadhseet, if A1 has C,D, E, F, G or H then it should go to "temp2" worksheet etc.
Is there a smart way of doing this rather than writing a number of with statements using 2 criterias each and hence copying data in more than one attempt (and thus slowing down the macro)?
I did think of using creating a dummy column, then using If statements to write True or false in that column, using true & false to filter and copy the data and then finally deleting the column. but as i understand i can not have more than 7 nested if statements but i have 8 criterias.
I have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies View Related