Last Visible Row With Autofilter
Jun 2, 2009I have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies
ADVERTISEMENT
Autofilter - Sum Visible Cells
Feb 13, 2008I've got an AUTOFILTER and would like to add only the visible cells in a particular column (column E). As the user changes the filter, the total would change - but I'm not sure where to even start with this one. I've attached a sample file.
View 2 Replies View RelatedAutofilter Data Not Visible On Worksheet?
Aug 5, 2013I am going bonkers with the worksheet autofiltered result. On userform "Find" when I use one of two comboboxes to filter the results no data is displayed. Using the textbox on that form the filtered data is displayed.
View 3 Replies View RelatedLoop Through Visible Row Numbers After Autofilter
May 28, 2014I'm looking to do a check on every row after I set an autofilter. Here's a scrubbed version of what I have so far.
Sub test()
max_x = Worksheets("Data").Range("B1048576").End(xlUp).Row
For datarow = 3 To max_x
If Worksheets("Data").Cells(datarow, 4) = "Wire" Then
Worksheets("Data").AutoFilterMode = False
[Code]....
Userform Autofilter Visible Rows
Aug 5, 2014I have a Userform that it makes possible to step through the the spreadsheet. It works with Previous and Next buttons. The Userform opens with a doubleclick. This works fine, but when I use an autofilter and the criteria reduces the number of rows, the Userform shows the hidden rows as well as the filtered rows. How could it be made that it only steps through the visible rows?
View 2 Replies View RelatedUserform Autofilter Visible Rows
Jul 11, 2007I have a Userform that allows you to step through the the spread sheet that works with Previous and Next buttons. This works fine.
When I use an autofilter where the criteria reduces the number of rows the Userform shows the hidden rows as well as the filtered rows. how can I make it just show the visible rows.
Autofilter - Ignore Non-visible Rows
Jan 20, 2014I have a spreadsheet with over 20000 rows of data and have used autofilter to find the information I want to check. Once I have these rows I want to check whether the cells in Column AE are higher/lower than the number (in this case '3'). Once it finds a cell that meets this condition then it copies and pastes the whole row so that I can review the entry.
The problem I'm having is that it doesn't work all the time. I've tested it a number of times in break mode & played it throughout and it works as expected, whereas other times it picks up the top row (header) and duplicates it or it picks up hidden rows and pastes them in sheet 2 if the condition is met. I want it to just pick up rows if they are visible (using the filter) if the condition is met.
Here's what I have so far:
Code:
Sub Lvl3v2()
'Level 3
Dim i As Integer
Dim r As Range
Dim c As Range
i = Worksheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row
[Code] .........
Scroll Through Visible Cells After Autofilter
Jul 12, 2006how to scroll through visible cells after I have autofiltered a list, the same way you do when you use the arrows on your keyboard. When I try the offset method, Excel selects the following row, regardless its visibility.
View 4 Replies View RelatedCount Visible AutoFilter Records
Aug 24, 2006I have records entered in sheet 1 named "Data". The "Data " Sheet contains Model wise records with serial nos and having status as either ZERO or ONE. Zero indicated that the particular model is out of stock while One indicates it is in stock.
When I filter the data using Auto Filter for records having Status 1, a list of records are displayed. I want to create a summary report in sheet 2 wherein it displays the no of occurence of a particular Model.
What I have observed is that whenever I filter for Status 1 & within it for Model A, it displays "3 of 12 records found" in the status bar. Is it possible to capture that "3" from that message displayed. Or is there any way to count the occurence ?
Autofilter: Determine When No Data Visible
Nov 29, 2006WHEN I FILTER FOR WORDS BEGGINING WITH LETTER I. THERE IS NO DATA...SO I HAVE SOME CODE THAT WILL POP UP MSG BOX. AND IF THERE IS THEN COPY DESIGANTED RANGE..HOWEVEER WHEN I FILTER USING THE BELOW CODE...IT DOES NOT RECOGNIZE THAT THERE IS NOTHING AND JUST GOES THROUGH AS NORMAL..
Sub START()
Dim rng As Range
Dim rng2 As Range
Dim worksheet1 As Worksheet
Set worksheet1 = worksheets("MAIN")
Selection.AutoFilter Field:=4, Criteria1:="=I*", Operator:=xlAnd
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(0, 18).Resize(.Rows.Count - 1, 1)
.SpecialCells (xlCellTypeVisible)
On Error Goto 0
End With
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else
worksheets("noms").Cells.Clear
Set rng = ActiveSheet.AutoFilter.Range
rng.Offset(1, 0).Resize(rng.Rows.Count - 1).Copy _
destination:=worksheets("NOMS").Range("A1")
End Sub
Next Visible Cell In AutoFilter Range
Jan 14, 2008I am looking for a code which can jump to a next cell from the activecell. I use the code
Activecell.offset[rowno][columnno]
This would take me to the next cell. However, this is a problem when the filter is on. I am not able to go to the next visible cell. Suppose if the row increase is 1, then cell selection goes to the hidden cell. I need to bypass the hidden cell and go to the next cell. Can anybody provide a code which does it? I tried searching the forum but could not get anything closer to this as I need something which works with offset and not cells.row.visible...etc.,
Count Visible Rows After AutoFilter
May 16, 2008Is there a simple way to count unhidden rows? I saw Counting number of unhidden rows =SUBTOTAL(103,D11:D7180) and, frankly, I'm wondering if there is a way to do it without a formula. I don't need the count in a cell, per se, just a quick count of the unhidden rows of a worksheet for usage elsewhere.
View 5 Replies View RelatedCheck For Visible Cells After AutoFilter
Jul 30, 2008I'm working on a VB code where I use an autofilter. I want to clear a selection in a couple of columns, where the value in the autofilter = 1.
This is the
Dim lRow1 As Long
lRow1 = WorksheetFunction.Max( Range("A65536").End(xlUp).Row)
Rows("1:1").Select
Selection.AutoFilter
Selection.AutoFilter Field:=9, Criteria1:="1"
Range("F2:H" & lRow1,"J2:J" & lRow1).SpecialCells(xlCellTypeVisible).Select
Selection.ClearContents
Sometimes there is no value = 1, which results in clearing row no.1 because this row was still selected for the autofilter.
I'd like to be able to check if there are any visible cells, before I proceed with the clearing of the selection.
I tried this:
If Selection.RowHeight <> 0 Then Range("J2:J" & lRow1).SpecialCells(xlCellTypeVisible).Select
Selection.ClearContents
But this doesnt work, because row no.1 is still selected.
Can I use an If then statement to check If there are any visible cells, then clear these, if not, resume next.
How To Display Number Of Visible Rows Using AutoFilter
Jul 12, 2014I am trying to display a certain number of visible rows, using AutoFilter. My idea is to use a helper column that will 'number' each visible row, but I'm not quite sure what functions to use for this.
View 5 Replies View RelatedReturn Count Of Visible Rows After Autofilter?
Mar 19, 2012I have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
Copy Paste The Visible Range After Autofilter With VBA
Mar 21, 2007In between a long VBA macro, I need to copy the result of autofiltering i.e. the visible cells / rows only, to paste on an other sheet.
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
Determine If Visible Dropdown Is True For Field In AutoFilter
May 9, 2014I would like to determine if the VisibleDrowndown is TRUE in the attached table.
The current macro sets it to FALSE in field 1. However, I want to identify when it is TRUE so I can run this macro.
Attached File : V1.xlsm
Working With Autofilter Macro, Work With The Visible Selections
Jun 23, 2009how to make this recorded macro work with more than the sheet it was recorded on. I need to work with the visible selections. But I'm having all kinds of problems trying to pick just the visible cells. Not having any luck with this project. I tried to included a test book but It keeps giving me an error.
View 4 Replies View RelatedAutoFilter Via Macro & Place Text In Visible Cells
Jun 22, 2007I need a macro that can change the text in Field 46 from Criteria1 to something else, ie from "To be capped" to "Capitalised". This is my current
Selection. AutoFilter Field:=39, Criteria1:="OPEN" 'STATUS
Selection.AutoFilter Field:=46, Criteria1:="To be capped" 'TYPE
Range("AT1").Select
how to change the text only on the selection found by AutoFilter?
Resize Visible Rows Based Only On Visible Columns Text
Apr 22, 2009Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedAutoFilter Method Of Range Class Failed - Yet Autofilter Works.
Sep 25, 2009Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedMultiple Checkboxes Visible Or Not Visible?
Jul 1, 2014I have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.
[Code] .....
Copy Visible Rows And Paste To Visible Rows In Same Sheet Of Excel / VBA Code
Oct 27, 2013I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
Copy Top Cell Post Autofilter And Reapply Autofilter Based On Cell Value
Aug 20, 2014I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
Set Autofilter To All Without Removing The Autofilter
Jan 16, 2007I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedHow To Copy From Visible Cells To Visible Cells
Apr 16, 2014Every time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
Sum Only Visible Cells
Jul 23, 2009I have a table of data with a filter on the top and a sum total at the bottom. Whenever i filter the list the total at the bottom doesnt change. how do i change it so the sum only calculates the visible cells?
View 3 Replies View RelatedOnly Visible On Start Up
May 9, 2009I have a workbook that is set to show a form on startup and then the code tells excel to be visible = false. How ever i have disabled the close button on my form therefore i have stuffed my program up and cant edit it at all.
View 3 Replies View RelatedSum Of Visible Cells Only
Aug 21, 2006I have a large spreadsheet that I am using multiple drop downs in to sort for
different scenarios. I do not want to use the general data subtotal command
but each time I sort I want to get a total for the visible cells -
Get Row Of Visible Cells
Feb 15, 2012I have finished a huge project. The final step is sending emails.
I have a filtered range. The email .HTMLBody is formed using the visiblecells, and forms an object called 'rng'
Only problem is - now I want to add my attachments. Within the visible range, the URL of the attachment is available (column 5).
So need a loop to do for each cel in rng.Column(5)
.Attachments.Add rng.Cells(cel.row?,5)
Can't get the row number of the visible cell to work. Once this is solved I can click the button and let the beast send out 1000+ emails. But at the moment cannot Was also thinking instead of For each cel, could use i = 1 to (last row in visible rng) ?