I have the following text in B5 "deposit fee 0.75%". I have a value of 3500 in B2. I would like a formula where a can multiply the value in B2 x the 0.75% that is contained in the text "deposit fee 0.75%"
I tried to use =B2*VALUE(MID(B5,17,1)), but it gives me #value
I am trying to add 40% to a row of numbers? All of which are whole numbers, like 19, 27, 32, 49 and so on and I want to be able to highlight that particular row and add 40% to it, so all numbers in the row have the 40% added to the individual number? So, my new row of numbers would look like: 26.6, 37.8, 44.8, 68.6 and so on....(using same #'s from up top) Is this possible or can it be done with ease? Or do I have to manual calculate the 40% and add it in? I am guessing there is a way to do it w/ a condition but like I said I am complete newbie.
View 6 Replies View RelatedI have a spreadsheet where I need to multiply each field in a column by 1.015. However, I need each field to roundup by 2 if the mulitplication is less than 2. For an example, a field of 60 would only increase by .9 to 60.9 when mutliplied by 1.015, but I'd like it to display 62. I have attached the spreadsheet for review.
View 4 Replies View RelatedI'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".
My formula currently is =Manual!$G$2*AllocationRule!$B5.
What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".
Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.
And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.
Excel (2000), what formula would I use to accomplish the following?
If A1 equal or less than 1000 value, multiply by B1, otherwise multiply by C1.
I have column A that declares the account as asset, liability, expense, etc. Some of the accounts need to be reversed. I'm having a hard time figuring out a formula or code I can use. Column C contains the values. I prefer VBA as I want to add it to the current macro I already have.
So if Column A has a liability, offset by (0,2), and multiply that value by -1. If Column A has an asset, leave the value as is.
I wanted to use an if-then statement but I'm not sure how to highlight entire columns. The number of liabilities, and assets, etc.
I have 2 columns - one that has numbers and the second that has text such as A, B, C, D,and E. I need to be able to convert the text into values such as 1,2,3,4,and 5 and then multiply with the first column that has value and display the resultant.
View 8 Replies View RelatedUsing Excel 2010...
I have a list of names (text string) in a column (A) that have associated whole numbers in another column (B). What I would like to do is create a formula that multiplies the text string in cell A2 (for ex.) by the whole number in B2 and return a "list" of the text string in A2 equal to the whole number by which it is multiplied.
Here's a visual example of the results I want to achieve:
Using the above example, I would like to end up with a list in column D with 159 total rows with the text contents corresponding to the whole number in column B.
I need to convert my percentage marks into values based on competency values. Once again my school board has change the final reporting method. Last year we had to use A, B, C, D. This year it is based on scales of 1- to 5. Since excel cannot have more than 7 nested IF statements I was wondering if anyone knew of a way to have a percentage mark converted into a scale number. Below is the following data.
0-5% = 1-
06-15% = 1
16-25% = 1+
26-35% = 2-
36-45% = 2
46-55% = 2+
56-59% = 3-
60-64% = 3
65-70% = 3+
71-76% = 4-
77-82% = 4
83-88% = 4+
89-94% = 5-
95-00% = 5
I have a list of prey for different fish feeding and I would like to know how to calculate the percentage of each prey.
View 2 Replies View Relateddistinguish text or value in a textbox with "%"? (e.g. input 7% or 0% is TRUE but input "" or 0 or 0.07 or or 7$ is FALSE)
View 4 Replies View RelatedI am having problems with a macro I wrote that basically fills things in two columns based on a set of values from other columns.
Lets say it looks like this (column B is based on column A):
A1 = Hi
A2 = Hello
A3 = Hi
A4 = Hello
A5 = Hi
A6 = Hello
A7 =
A8 = Hi
A9 = Hello
A10 = Bye
After the macro runs, column B should look like this:
B1 = 10%
B2 = 20%
B3 = 10%
B4 = 20%.............
I have attached an excel sheet and I want to count and report frequencies the amount of X that are occurring from the 'CSR1' book in a table in the 'Frequency' book.
The CSR1 book has 4 sections and I need to formula to adjust the total percentage accordingly if only 1, 2, 3 or 4 sections have been populated with data.
Please see attached.testdata.xls
In the attached workbook i need to take out the % numbers from the text to populate the cells.
the Pay % cell is the % before the / and the receive % is after the /.
I have a spreadsheet that tracks in column D "completed" projects. I want column T to populated "100%" when column D has the text "completed" in the cell. What is the formula?
View 1 Replies View RelatedI have a list of YES or NO answers in a sheet. I want to calculate the % of YES in the list. E.G. if there are 100 cells in total and 25 of them say YES and the remaining 75 say NO, the percentage should be 25%.
View 2 Replies View RelatedI have a user form which includes some text boxes (txtRUL.text for example) where I want to enter a number as a percentage. I divide the number entered by 100 to avoid Excel automatically multiplying by 100 and the result is displayed in the user form as the correct percentage.
Private Sub txtRUL_AfterUpdate()
EnableSave
txtRUL.Value = Format(txtRUL.Value / 100, "0.0%")
(I'm sorry I cant figure out how to format this code as code in this post)
This works well, trouble is when I save and it writes the results to the worksheet, the numbers in the user form revert back to plain unformatted non percentage numbers (ie 5% goes to 0.05)
I have a form in work which acts as a tick sheet for tasks complete on a construction site. When a task is complete I copy & paste from a key of dates i.e. week ending 11.05.15, this allows me to see what week a task was complete.
Generally I only marked off tasks which were 100% complete but my manager wants me to enter the % of the task complete also, i.e. 80% in the box.
So my question is how can I have the formula assume that any box with a date & shading is 100% and any cell with a number i.e. 80 is only 80% complete. I need it to monitor around 150 cells and give me the overall % complete based on what i have discussed.
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
calculating the percentage of a percentage and writing the formula for excel.
There are 295 people in a room, of the 295, 75 or 25% are mothers. (I know how to calculate 25% - 75/295 = 25.42) of the 75 mothers 35 have 3 children, 32 have 2 children and 10 have 1 child.
35 is what percent of 25%
32 is what percent of 25%
10 is what percent of 25%
How can I multiply a range with a value and put the value in another range, using VBA ?
I have in some cases 2000 -3000 rows and I need to automate the process.
Please open attached file!
I have a table with data which I have entered with VBA, now the only thing missing is multiply column D with column E.
When the data gets put into the table I like the data in column E to be multiplied with the date from column D.
I am having trouble creating a formaula to calculate value based on the sum of a cell. For example if the sum of cell A1 is <= 149 I need to multiply the sum by 1.0
if the sum of cell A1 is 150-199 I need to multiply the sum by 1.50, if the sum of cell A1 is 200-249 I need to multiply the sum by 1.75, and if the sum of A1 is >= to 250 I need to multiply the sum by 2.00
b25
if the amount in b7 is the same or less than 7495 i need it to be multiplied by 10%
b26
if the amount in b7 is greater than 7495 then i need it to multiply the diference by 20%
I want to be able to enter a value into a cell (within a specified range if necessary) and have it automatically multiply by a set value and overwrite the original entry with the result so making it all happen within one cell.
View 9 Replies View RelatedAfter ripping a .pdf report into Excel I am left with a variety of items in Column A, numbers as text, text, and blanks. I manually selected entire column and paste special multiply. Seems to have convereted blanks to zero, converted numbers stores as text to numbers, and ignored any text. Problem is writing macro to repeat the steps as will use the tool every period. I tried looping through the range
For Each C In myRange
C.Value = C.Value * 1
Next C
But this returns type mismatch error. So why did it work manually if won't work through the macro?
I need the code for a macro that, with a selection, it multiplies the cell number by “x” amount, keeping the original cell format. I know I can do that using paste special but I prefer a macro to be able to use it on different spreadsheets.
View 9 Replies View RelatedI have 3 columns. A B and C. In column C I want to input the answer to a formula into each cell using data from cells in their respective rows,
For. e.g.
Cx= Ax- (Bx X 0.8).
I want to be able to input this formula somewhere that will automatically fill out the cells in column C.
Column C is 20 cells long so x would range from 1 to 20.
I'm having difficulty in summing multiple rows (order volume) over many columns (despatched volume) that have a specific constant (price for the week).
Please see spreadsheet attached. I would like row 19 to be achieved as one line, thus removing rows 14-18. see logic in rows 14-18 which drives the row 19 result.
The problem is the volume is over 52 row and the price is over 1 row. Cannot think straight as to how to build the array. No VBA as the result needs to be transparent from a formula.
I'm having difficulty in summing multiple rows (order volume) over many columns (despatched volume) that have a specific constant (price for the week).
see spreadsheet attached. I would like row 19 to be achieved as one line, thus removing rows 14-18. Please see logic in rows 14-18 which drives the row 19 result.
The problem is the volume is over 52 row and the price is over 1 row. Cannot think straight as to how to build the array. No VBA please as the result needs to be transparent from a formula.
I have a cell that is "Start Time." Another is "End Time." And, of course, "Total."
The sum listed in "Total" is multiplied by a cost per hour. Except it does not work. I have attached an example copied directly from the cost sheet.