I need a IF funtion to look at a series of cells and if the cells are empty I want it to proceed to userform1. If the cells have data already i want it to go to userform5.
I tried IF IsEmpty(cell list)=True Then UserForm1 and IF IsEmpty(cell list)=False Then UserForm5
But it only bring up userform5 no matter what the cells have in them.
I have a range of cells - A1:U200. All I want to do is to check that all cells are populated and if there is an empty cell return the value in column A of the same row. I think I can do it with Loops to test every cell but wonder if there is a simple method.
View 9 Replies View RelatedThis seems like it is pretty easy but for some reason it is being goofy for me.
I entered this code to check it.
IF IsEmpty(Range("A1")) Then
msgbox("Yes, It is empty")
Else
msgbox("Not empty")
When it comes up I always get the box with "Not empty" even though I havent typed anything in the cell since I have created it. Even tried Clear Cell. Basically what it is for is to check if cell A1 is empty and if it is, it will create a Data header and if not, it will find the first empty cell and continue inputting data.
I'm trying to get a looped function to continue down a worksheet until a specific column has no data in it. My code is below, and it works great for doing what I want it to do (copy a row and continue pasting it every 3 rows down until the row where Column E has no data in it) but it doesn't stop at the end of the data:
HTML Code:
Sub Test2()
' Select Row 11, *first line of data*.
Rows("11:11").Select
Application.CutCopyMode = False
[Code] ....
Excel 2003. I believe I've got everything working in the code up until:
Code:
If rnGx = rnGy Then
It loops once and then "Run-time error '424': Object Required" for the code above.
Code:
Sub test1()
Dim rnGx As Range
Dim rnGy As Range
Dim i As Long
Dim xNum As Integer
Dim yNum As Integer
i = 2
Set rnGx = Cells(i, 2)
[Code] ....
In case I'm way off, I'm trying to get the code to do the following:
Look for identical entries in column bw here duplicates exist, sum the corresponding column d values into one of the existing columns delete the remaining duplicate do this until there are no matches.
Column b is sorted ascending, so any matches should be next to each other. as I'm writing this, though - I realize that if there are triplicates or more in column B, this would need to be run more than once.
I have a few cells that I need to determine if they are empty.
Case IsEmpty(Range("J" & i))
Range("J" & i).Value = "Hello World"
I tried using isEmpty, but the cells I have in Question have a length of 30 yet they are blank, I believe they are like this "", they show up as blank in the cell.
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
Another interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedFunction Haversine has correct value in debugger but in cell it has the same value as Haversine2. Is this a known bug?
Public Function Haversine(lat1 As Double, long1 As Double, lat2 As Double, long2 As Double) As Double
Dim temp As Double
[Code]....
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies View RelatedI have a function
VB:
Function f1(Matrix As Range)
'Does something and returns f1 = a double
End Function
And a second function which defines and constructs a matrix of doubles to use as an argument in f1 to return a double:
VB:
Function f2(dD As Double)
Dim MatrixRed() As Double
Redim MatrixRed(1 To dD, 1 To 10)
For i = 1 To dD
For j = 1 To 10
MatrixRed(i, j) = i * j
Next
Next
f2 = f1(MatrixRed)
End Function
I get an output error (#VALUE). I think it has something to do with MatrixRed not being a range anymore?
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
I have created a List in excel of various tasks. (See attached example.) Each row contains one cell with a function which equals the cell above it and to the right. So the function for cell C3 would be D2. The only importance is that the cell mirrored is always the cell one above and to the right. However, now I would like to be able to rearrange this List, but the “one up and to the right” function will now be all over the place.
Is someone aware of a function which will target a relative location instead of an exact cell?
I keep getting the "You've entered too many arguments for this function" error.
Here is the formula:
=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))
I am trying to nest an IF function with a CEILING function. If C10 is < 3.5, make it 3.5, however, if C10 > 3.5, CEILING (C10, 5)
right now it looks like:
If (C10
I have been looking around have this much code from this site, modified. What I am trying to do is calculate numbers by a position with cells D through K having numeric values. I have 'hardcoded' the cells (D2, E2, etc in the code below), but in reality I only want the current row (so if the formula is on the 2nd row, I want D2, if it is on the 3rd row, I want D3).
My problem is obviously the formula isn't working because I am not correctly tying back to the spreadsheet (Positioncalc.xls). When I put the formula in the spreadsheet it works, but in my script I get 0 everytime.
My Script:
Function Position(rCell As Range, Optional RightPosition As Boolean)
Dim vResult
Select Case rCell.Text
Case "QB"
vResult = (2*D2) + (2*E2) + (2*F2) + (4*G2) + (2*H2) + (1*I2) + (4*J2) + (3*K2)
Case Else
vResult = "Invalid Position"
End Select
If RightPosition = True Then
Position = vResult
Else
Position = "Position not valid"
End If
End Function
So, when I put =Position(A2,True) I expect to see the formula results of those cells calculated based on the position (QB, HB, etc with their unique formulas).
My next challenge after this is to highlight certain cells based on the Position. So if A2 = QB, I want cell D2 boldface and Red, etc. I have seen some scripts on colors and such here, so I might be able to figure it out.
I have a range of cells, for this example I will use 2.
Cell E17 = 77/170
Cell E18 = 8/9
Using the following formula: =SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)))
This bring back an #VALUE! Error as the second part of the formula keeps picking up "/9" however the first part works fine, displaying "170"
Now if I use:
=SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)-1))
It all works. The problem is that I need this to be automatic using the above way means having to add a "-1" to every formula for a cell with only 1 char to be added.
Using the formula:
=SUM(RIGHT(E17,FIND("/",E17)-1))+SUM(RIGHT(E18,FIND("/",E18)-1)).....
I have a tracking sheet (attached) that has many functions, but I'm having trouble with two of them. First of all, I have a Worksheet_Change event set that when a cell is cleared, it fills the cell with a formula to use the record above it as a default value if another cell is equivalent. This worked when I first wrote it, but now it seems to break every other time I use it. When assigning the formula it returns a Method Default/FormulaR1C1/Offset failed error message. It seems to be different for each one, each time and I can't figure out what the problem is.
The other problem I'm having is that I wrote a BeforeDoubleClick event to expand or contract any given record, or series of records. this too worked when I initially wrote it, but now is only hiding one row when it should be hiding eight or more.
I'm not terribly versed in VBA and totally baffled as to why I'm having these problems. As I side note, any ideas to clean up any of the code and make this run smoother (as ther will be many more series added when complete).
I have a user defined function in one VBA module that I'd like to call from another module, so I would normaly scope it as "Public".
However, as I don't want it to be available to Excel as a worksheet function, I would also normally scope it as "Private"
Is there a way to have a function that is available to other VBA modules in the same project, but not to Excel as a worksheet function?
A most of time I'm using VLOOKUP function. I want to call specially this function by pressing custom button (w/o pressing "Insert Function" and choosing VLOOKUP)
View 4 Replies View Relatedwhen you type in a builtin function in the formula bar such as =DAY(), a small callout box appears below telling you the syntax - in this case "DAY(serial_number)". Is it possible to achieve this for a user defined function?
I have written a VBA program and using in Ms.Excel. The problem is when I try to write the VBA function through the function wizard it works but when I write the function in excel worksheet cell, it doesnt execute. I do not now the reason.
View 2 Replies View RelatedI am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
I'm comfortable with the IF statements in excel and not familir with many of the other functions available to me. I am trying to create a character calulator for Elder Scrolls III (Marrowind). So that a person may enter their race, ***, and other choices and their by calculating all starting stats. There are 10 races you can choose from and I can cover 9 of them with the if function (leaving one as if all other options are false). I would like to know if there is a better way such as a drop down list or some way to search an array or anything that would be better suited to search the race cell and return data if it's true. I'm running into the same probably with choosing the constalation (13 choices in this catagory).
I thought to split it two different data fields, by letting you choose from 4 in one cell and the other 9 in a different cell, but realized I don't know how to make it check two different cells for a choice to return it to the display cell without hitting the limitation of the 7 nested funcations in a forumla again.
I am using the COUNTA function which works great but I also have data that I dont want counted and do not know of the problem solver.
E.G
in B1 I have vlookup function thats brings back either "B", "C" or "M".
in c1 I have =IF(A1="C",B1,"")
Now, that tells me if the data is B or not. If it is, it says B If it isnt, its blank
Thats great but when im trying to count how many "B"'s there are, it counts the blanks as well!
I am using COUNTIF functions with Defined Name lists to quickly determine if a certain number is on a list. As a backdrop, I am using Chemical Abstract Service (CAS) numbers and attempting to somewhat streamline chemical approval for a small company. CAS numbers are often in the format of XX-XX-X with varied amounts of numbers. One of the defined lists however does not have dashes.
Thus, I am using cell B1 to enter the CAS# once and then for each list having a column to itself with an associated worksheet with a defined name list. Most of the columns have the function =B1 with the conditional formatting of =COUNTIF(definedname,BX) and formatted to turn red if the chemical is on the list. This is working for all of the columns except for the list that needs the dashes removed. For instance, CAS 64-67-1 is put in B1 and cell B5 has the formula =SUBSTITUTE(B1,"-","") which brings the number to 64671 which matches the number in my defined name list. However, the cell will not turn red. What am I missing?
I want a UDF; = OK (f1,f2) each argument being an alternative function. If f1 returns an error message then use f2. Should be easy but I cannot get it to work.
View 5 Replies View RelatedI have the following function:
=IF(AND(I17>=$I$1,O17>=$O$1,Q17>=$Q$1,F17
TPR, DISPLAY and FEATURE columns generate a rating based off of an IF function. In the Executed column, I need TPR, FEATURE, DISPLAY to be averaged together...BUT....In I want the average only include columns where there are numbers. For example in row one the eqn would be (1+3+2)/3, but in row 2 the eqn would be (1+1)/2...can I state an average function within an if function? Or what would be the best way to create an eqn for this?? I have thousands of rows to complete and doing it manually is not an option.
0- Did not meet expectations
1- Below expectations
2- Met expectations
3- Exceeded expectationsTPRDISPLAYFEATUREExecuted?Effective?Comments132Coming off of a Dec promotion113111111221
On sheet 1 I have a list of 1000 firstnames
On sheet 2 I have a list of 1000 emails,
I need a function that states If a cell in the email column contains a string or value from the names column, it will result in a true statement so that I can separate out the emails that have these peoples first names.