I'm trying to get a looped function to continue down a worksheet until a specific column has no data in it. My code is below, and it works great for doing what I want it to do (copy a row and continue pasting it every 3 rows down until the row where Column E has no data in it) but it doesn't stop at the end of the data:
HTML Code:
Sub Test2()
' Select Row 11, *first line of data*.
Rows("11:11").Select
Application.CutCopyMode = False
What I am trying to do is create a chart for each row in my raw data - the rows does change on a week to week basis as we are comparing stores
My raw data is: (I would post data although its too wide Column A - New Store Column B - Like Store Column C:N - New Store Sales Column O:Z - New Store SOH Column AA:AL - LIke Store Sales Column AM:AX - LIke Store Sales
I am trying to loop my code so that it creates a new chart for each row....although the loop keeps going and it doesnt move down a row each time
my code is:
Range("A1").CurrentRegion.Select rnum = Selection.Rows.Count Range("C2:N2").Select For i = rnum + 1 To Rows.Count If rnum >= 1 Then Charts.Add ActiveChart.SetSourceData Source:=Range("'CHART RAW DATA'!$C$2:$N$2").................
im trying to use a loop to open each file within that folder. My problem is it keeps looping and only opens the same file -
my code is:
'Enter names of files within C:Temp in activesheet Dim myDir As String, fn As String, txt As String, myList myDir = "C: emp" fn = Dir(myDir & "*.xls") If fn = "" Then Exit Sub Do While fn "" txt = txt & vbLf & Left$(fn, InStrRev(fn, ".") - 1) fn = Dir Loop
I've got this code to display a certain cell from multiple files, and functionally it works, but I get a out of stack space error after it runs for a while. I'm sure this is because the loop doesn't know when to stop, which I thought would be solved by having " Do Until sBook = "" " instead of Do; however, then the code will not run at all.
Private Sub Worksheet_Calculate()
Dim sBook As String Dim sFilePath As String
On Error Resume Next Application.EnableEvents = False
I have a form with two buttons, one is to start downloading, one is to stop it, a sub is called when start buuton is clicked, there is a DO LOOP, I hope the DO LOOP stop when I clicked STOP button,
I have the following code that gets stuck in the Loop and will not stop unless I press the Esc key:
Sub WIP() Dim ws1 As Worksheet, ws2 As Worksheet Dim lastrow As Long Dim newRow As Long Set ws1 = Sheets("PAYCALC") Set ws2 = Sheets("WIP")
Application.ScreenUpdating = False With ws2 .Range("A2:C" & .Range("A2:C2").End(xlDown).Row).Clear End With
x = 10 lastrow = ws1.Range("C5").End(xlUp) Do newRow = ws2.Cells(65536, 1).End(xlUp).Offset(1, 0).Row ws2.Cells(newRow, 1) = ws1.Cells(x, 2).Offset(-2, 0).Value ws2.Cells(newRow, 2) = ws1.Cells(x, 2).Value ws2.Cells(newRow, 3) = ws1.Cells(x, 2).Offset(3, 0).Value x = x + 21 Loop Until x >= lastrow
There's a twist to this. I have the same identiclecode in a different module. The only difference is ws2 is different and there are 7 newRow's. Other then that the two are the same.
That one works just fine without getting stuck. It will go through 200+ sets of records and stop when it reaches the last one.
The one above will not stop even though I just put in three records on ws1 for testing.
The loop is supposed to stop when the cell that is 4 columns to the left, in the workbook named "Complete DSS", changes numbers.
/ This is the cell ref. / This is the original Do While ActiveCell.Offset(0, -4) = ThisTape
The number will stay the same for a while until it changes tapes, then it Should stop when they are no longer equal.
It used to work, but maybe some recent changes have messed up the function.
Sub Compare_printout_2_WDMS() Application.ScreenUpdating = False Dim ray, sht As Worksheet, Exist As Boolean Dim BookA Dim I As Long I = Worksheets.Count
AreaNum = InputBox("¿Que es el Area?") ThisTape = Range("C8").Value ActiveWorkbook.SaveAs Filename:="C:Documents and Settingssmith27DesktopArea 319 printoutsArea " & AreaNum & " " & ThisTape & ".xls"
Columns("A:A").insert LR = ActiveSheet.Range("B65536").End(xlUp).Row..........................
I have a piece of code that put a check in all checkbox in column B from row 5 to row 50 but in column C, I have data from row 5 to 38. I want the macro to stop at row 38 in column B. When the cell in column C is empty stop putting checks in column B. How can I make this macro Check all checkbox down column B and stop when column C is empty. How do I add a loop to stop when the cell in column C is empty?
Private Sub CommandButton1_Click() Dim CB As Variant For Each CB In ActiveSheet.CheckBoxes CB.Value = False Next End Sub.......
I have a range of cells - A1:U200. All I want to do is to check that all cells are populated and if there is an empty cell return the value in column A of the same row. I think I can do it with Loops to test every cell but wonder if there is a simple method.
I need a IF funtion to look at a series of cells and if the cells are empty I want it to proceed to userform1. If the cells have data already i want it to go to userform5.
I tried IF IsEmpty(cell list)=True Then UserForm1 and IF IsEmpty(cell list)=False Then UserForm5
But it only bring up userform5 no matter what the cells have in them.
This seems like it is pretty easy but for some reason it is being goofy for me.
I entered this code to check it.
IF IsEmpty(Range("A1")) Then msgbox("Yes, It is empty") Else msgbox("Not empty")
When it comes up I always get the box with "Not empty" even though I havent typed anything in the cell since I have created it. Even tried Clear Cell. Basically what it is for is to check if cell A1 is empty and if it is, it will create a Data header and if not, it will find the first empty cell and continue inputting data.
Excel 2003. I believe I've got everything working in the code up until:
Code: If rnGx = rnGy Then
It loops once and then "Run-time error '424': Object Required" for the code above.
Code: Sub test1() Dim rnGx As Range Dim rnGy As Range Dim i As Long Dim xNum As Integer Dim yNum As Integer i = 2 Set rnGx = Cells(i, 2)
[Code] ....
In case I'm way off, I'm trying to get the code to do the following:
Look for identical entries in column bw here duplicates exist, sum the corresponding column d values into one of the existing columns delete the remaining duplicate do this until there are no matches.
Column b is sorted ascending, so any matches should be next to each other. as I'm writing this, though - I realize that if there are triplicates or more in column B, this would need to be run more than once.
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
I have a few cells that I need to determine if they are empty.
Case IsEmpty(Range("J" & i)) Range("J" & i).Value = "Hello World"
I tried using isEmpty, but the cells I have in Question have a length of 30 yet they are blank, I believe they are like this "", they show up as blank in the cell.
With Sheets("regrade pharm_standalone") For Each r In .Range("standaloneTerritory") If r.Value = "X101" Then r.EntireRow.Copy Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues End If Next r End With ------------------- I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro() Dim lastRow As Long Dim i As Long
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code: for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row) if x = y then *storedRow = rowNum end if next rowNum *
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range Dim TotalRows As Long TotalRows = Cells(Rows.Count, 1).End(xlUp).Row For Each CELL In Range("C1", "C" & TotalRows) CELL.Select 'Code here to delete a row based on criteria Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop() ' ' Loop through an indexed number of worksheets; _ ' & this ensures that the worksheet range is dynamic _ ' and is able to adjust when new sheets are added/removed, etc. ' 'Dim ws As Worksheet Dim i As Long Dim ws As Worksheet
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,
Sub Filterout() Dim c As Range Dim rng As Range Dim i As Long Dim lrow As Long Dim counter As Integer lrow = Cells(Rows.Count, 3).End(xlUp).Row Set rng = Range("c2:c36")
For Each c In rng If Left(c.Value, 1) "~~" Then c.EntireRow.Delete End If Next c
it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.
am i doing something wrong?
dan ========================================================== Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster. ==========================================================
Sub new2()
Dim Org_Area As Variant Dim Item As Variant Dim Copy_To1 As Variant Dim Cell_Ref As Variant
I have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3
here is my main loop A1 = 5000 and second loop need to run inside the this loop
Sheet1.Activate i = Range("A1")
For b = 1 To i If Cells(1 + b, 3).Value = "P" Then Cells(1 + b, 29).Value = 1 Else If Cells(1 + b, 3).Value = "S" Then Cells(1 + b, 29).Value = 2 Else If Cells(1 + b, 3).Value = "C" Then Cells(1 + b, 29).Value = 3 End If End If End If Next b
I have loops working in other loops. The macro is almsot working well. It does the calculation i want but it fails to stop a loop, because of that, the macro can't run the next main loop (c), which is to move to the next cell where the calculations must be run.
I attach a file. the troubleshooting macroation is Sub Itiration.
The code of this macro are bellow. Basically, the loop using d as counter run into an endless loop. I don't how to stop this loop without affecting the results which are calculated correctly.
Sub Itiration() Dim CurCell As Object Dim TempSum As Double Dim d As Integer
For c = 3 To Cells(3, 4) If Cells(11, c) > 0 Then For i = 1 To Cells(10, c) Do
Going through a loop, I am trying to load pictures into an image box (or alternatively into a label) one by one i.e. going through the loop the first time, I want to load picture 1, then on the second loop, picture 2 and so on. A bit like an automated slide show.
I have written a simple loop and have used the loadpicture function to load the picture into the image box. When the code runs, the image box only gets populated after the last run through the loop. I have tried using application.screen updating function and the image.activate function without success. It is a simple bit of code and I expect an easy problem to solve if you know excel vba well.
