VBA Macro (Changing Cells From A1-C3 Then A2-C2)

Aug 7, 2014

What my code needs to do: It needs to verify data in column rows say for this example columns A to C and infinite rows. It needs to verify the data in this order A1, B1, C1, A2, B2, C3 etc. (One of the part I have problems to do) It also needs to add to a row/cell "1" when certain conditions. (In the same line as the last checked data in the column "D" say for exemple last data that was checked is "A3" well the 1 must be written in "D3". The conditions are simple the first Data the macro encounters must be higher than 0.25 and all following data must be higher than 6, whenever the next data is lower than 6 or empty add 1 to the corresponding D row and restart at the 0.25 cell "checking".

View 2 Replies


ADVERTISEMENT

Macro Not Changing Cells

Dec 20, 2006

I have button in the Excel sheet.When I click the button the following code got triggered.

Sub Button1_Click() 'YieldCurveGet
Dim arrayData As String
Dim CurveString As String
'arrayData = "Test,Test1....." '(for eg)
arrayData = WorksheetFunction.RTD("OrcExcel.RTDServer", "", "YieldCurveGet", "AUD yield curve", "AUD", Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null)
CurveString = Split(arrayData, ",")
i = -1
For x = 1 To (UBound(CurveString) / 2)
i = i + 1
range("C" & x) = CurveString(i)
i = i + 1
range("D" & x) = CurveString(i)
Next x
End Sub

After triggered get invoked I need to set value of "arrayData " from VBA to Excel.Iam not sure what's going wrong.I cannot see the value in the Excel.

View 8 Replies View Related

Macro For Changing Colors In Cells?

Mar 13, 2012

I have a worksheet where I want the to change the collor of a range of cells in accordance to the value in another range of cells.

So if the value is "Gron" in cells C4:C27 then I want cells J4:J27 to return the color green. If, however, the value is "Rod" in cells C4:C27 then I want cells J4:J27 to return the color red.

View 9 Replies View Related

Macro For Changing Background Color Of The Cells

Oct 21, 2008

I have an excel sheet in which many cells have a background color of Green. These cells are located all over the sheet. I want to change the background color from Green to Red not affecting the color of other cells in the sheet.


I will be realy really thankful, as I have to do this exercise for more than 50 worksheets.......If I start doing it manually by selecting each celll with green color background and changing it to red.....you can well imagine my condition.....my life would get shorten significantly while doing this.

View 6 Replies View Related

Changing Color Of Selected Range Of Cells Using Macro

Jun 17, 2013

I'm trying to create a macro that will change the color of the cells I've selected to green. My selection will vary depending on what cells I'm trying to color green (not a fixed range). My current code only changes one cell of my selected range:

Sub IN_PCA()
'
' IN_PCA Macro
'
'
ActiveCell.Select
Range("M243").Activate
With Selection.Interior

[Code] .......

I've tried using "ActiveRange" in lieu of "ActiveCell" as well as other commands that would seem to be correct but have failed.

View 3 Replies View Related

Macro To Lock A Number Cells After Changing A Cell

Jan 5, 2009

I have an excel sheet which is protected (mainly so that the users will not change any formulas) the excel sheet is basically a list

Just to put you in the picture
Column B Is PO Number
Column C Is Remarks
Column D Date
Column E Description
Column F Supplier
Column G Amount

I would like that when Column C changes to "OK Checked" column B C D E F G are protected and locked. But obviously for that particular row.

For example the input of Cell C15 changes to "OK Checked" then B15, C15,E15,F15,G15.
the macro must NOT be fixed to a particular row (in this case 15)

View 9 Replies View Related

Macro To Set Current Time In A Cell Without Changing Similar Values In Other Cells

Mar 4, 2012

I have a Macro 'Timenow' to give current time in a Cell of MS Excel, but then it changes all Cell values of sheet where the macro was used.

Sub Timenow()
'
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "h:mm"
Range("F5").Select
End Sub

Even assigning value to variable does not work:

Sub Timenow()
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
Dim TN As String
TN = Format("=now()", "h:mm")
ActiveCell.Value = TN
End Sub

how to restrict the macro to change the value of current/active cell only without effecting other cell values?

View 4 Replies View Related

Under Solver, The Changing Cells Box Only Alllow 200 Adjustable Cells

Apr 26, 2007

Under Solver, the changing cells box only alllow 200 adjustable cells. I had problem that my adjustable cells is more than 200. Is there anyway I can increase it ? maybe using VB.

View 2 Replies View Related

Changing Cells In A Column To Cells In A Row

Nov 26, 2009

how do i change cells J31 to J58 to row C3 to C30 on another sheet

View 4 Replies View Related

Changing UDF To Macro

Feb 8, 2013

I found the following function in an old thread.

Public Function cleanString(fNameStr As String)Dim i As IntegerConst BadChars = "=+/'*?).,#%~!($[]÷™©" For i = 1 To Len(BadChars) fNameStr = Application.WorksheetFunction.Substitute(fNameStr, _ Mid(BadChars, i, 1), "") Next i cleanString = fNameStr
End Function

How would this be modified to work as a macro on selected cells (with selection?) I lost the formatting

View 3 Replies View Related

Changing A Macro

Jan 6, 2009

what needs to be changed on this code to only apply once for the row and not over and over again.

Dim Cell As Range
If Application.Intersect(Target, Range("ActivityRange")) Is Nothing Then Exit Sub
Application.EnableEvents = False
For Each Cell In Range("ActivityRange")
If Len(Cell.Value) > 0 Then Cell.Value = Cell.Value & Chr(10)
Next Cell
Application.EnableEvents = True

View 9 Replies View Related

Changing Image By Cells

Jul 7, 2014

l want to change picture according to the cell. For example. İf cell is "car", it will be 1.Picture. İf cell is "plane", it will be 2.picture. But Pictures will not be in the excel file folder. Picture was copied into excel file. I've added a sample file.

View 2 Replies View Related

Changing Formats Of Cells

Apr 19, 2009

the following i have 1500 rows and around 15 columns to change. format says 1.49-2

I need it to say 01:49.2

when I highlight it and go into format cells. and change it to min:ss.0 it changes to the following 48:28.8. i have included a file for you to see

View 5 Replies View Related

Changing Cells In Excel From (First Name Last Name) To (Last Name First Name)

May 18, 2012

I have a worksheet full of names in column A that are "First Name Last Name", is there a VBA code that I can write so when a user inputs the name in the "First Name Last Name" format it automatically changes the format of the name to "Last Name, First Name"?

View 3 Replies View Related

Changing Highlighted Cells At Once

Feb 24, 2013

I have a question concerning highlighted cells. If I am using highlighted cells to show different headings and sections of a model, how could I change the color of a particular header and apply to all of them at once?

I.e. I have a header that is blue and sub headings that are yellow. I have this for 100 different tables. Is there a quick way to say, find cells similar to my blue header, and apply changes to all of them? I'd prefer not to ctrl + click each header to change the color.

View 5 Replies View Related

Changing The Value And Format Of Any Cells Of A Certain Value

May 26, 2006

I need to a macro to find any cells with the value 0.00e+00 (which is in scientific format - because thats the format i get from the software download) and change those cells to 00E010 and text format.

View 8 Replies View Related

Using Same Macro To Sum Changing Ranges

Jul 21, 2014

Is it possible to use the same macro when ranges have been changed? Attached is a sheet that I update frequently (rows will change day to day, not columns) and the goal is to have a dynamic macro that sums the rows highlighted in yellow and red. Is this possible?,

View 4 Replies View Related

Changing Macro To Use A Loop

Mar 12, 2014

I'm using a macro to drag down a formula across a worksheet then again further down the worksheet which is working ok but I know there has to be a better way of doing it. At the moment every time I add a new column I have to edit the macro over and over and its getting out of hand. I know there must be a way of rewriting the macro into a loop but my skills are obviously still new.

Here's the macro:

[Code] ......

This continues over to column AO so far then I drop down a few rows and do it again:

[Code] .....

I think I need to set variables that set the row and column each time. maybe a "drag formula one column at a time from row x to row y until column header is empty then move to the new row and repeat"?

View 4 Replies View Related

Run Macro If Values Are Changing?

Dec 21, 2011

I have a code that clears the content of a cell if the value of that cell exceeds two.

Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Cells(1, 1).Value > 2 Then Cells(1, 1).ClearContents
End Sub

My problem is the value of this cell comes from a function and changes every second automatically (linked to a data feed). So I'm not changing it manually, therefore my code is not working unless I touch it. I just wanted to ask if I can add a code onto this which checks the values and runs the ClearContents macro if there is any change.. I've got a few sheets like this so I need this to run in the background..

View 2 Replies View Related

Changing VBA Macro Using InStr?

Aug 29, 2012

I want a vba macro which performs some thing like this. I think probably this can be done by using InStr function, the macro attached here just find the exact same value and shows the result but i want similar values,

Code:
Sub a()
lastrow = 10
For arow = 11 To 16

[Code].....

View 7 Replies View Related

Changing Ranges In A Macro?

Jun 24, 2013

Code:

Sub appointment_nieuw()
With CreateObject("Outlook.Application").CreateItem(1)
.Subject = Range("C3")
.Start = DateValue(Range("A3")) + TimeValue(Range("B3"))
.Duration = 0
.Location = Range("D3")
Dim cell As Range
For Each cell In Range("F2:H2")
.body = .body & Space(2) & cell
Next
.Save
End With
End Sub

I have this macro that works great, but every time I have a different appointment. I have to go into VB editor and change the ranges for the subject, datevalue, timevalue, location and body.

Can I get a text box (or something better) to pop up and I enter the ranges for the 5 in it and have it change in the macro?

View 6 Replies View Related

Changing Sum Of Two Cells To Equal -4 If Answer Is Zero

Dec 8, 2013

I wish to be able to add adjacent cells as follows, assuming I have a number in a1. (in B1) =a1-4.

If the answer is zero I would like to change it to -4 and then continue the process for more cells to read 16 ; 12 ; 8 ; 4 ; -4 ; -8 ; -16 etc.

View 6 Replies View Related

Formula In Cells With Changing References

Mar 12, 2009

I am running a research experiment in triplicate. Upon generation of data for all three, I create an averaged value of the three. I then take this value and do more calculations with it on a separate sheet. I wanted to know if there was a way in which I could quickly generate formulas based on a changing reference cell.

Example Data:

V1A 28
V2A 26
v3A 30
AvA 28

V1B 20
V2B 22
V3B 18
AvB 20

Vxy represents the value of y sample, x triplicate. V1A being sample A, first triplicate. AvX is the average of the three values.

I want to be able to generate a formula that references AvA which can be applied to the cell immediately below to reference AvB. A simple example would be to square the average.

View 3 Replies View Related

Changing The Sign Values In Cells

Oct 29, 2009

i have one row of values ie c4="-121" d4="122" e4="123" f4="124"

and h4="test" like this .

if h4="right" (i change the value test to write) i want to change the

c4,d4,e4,f4 signs positive to negative

ie c4=+121 d4=-122 e4=-123 f4=-124

i write sample code like this

View 11 Replies View Related

Changing Text Based On Another Cells Value?

Dec 19, 2012

I have a value list box in C1 with 4 values "Yes", "No" , "Pen" & "Con"

If a user selects Yes in C1 for example I need J1 & K1 to populate with Yes (or No if they selected No from C1)

but if they have selected or later change the value in C1 to Pen or Con for J1 & K1 to remain empty.

View 8 Replies View Related

Keeping Links Between Cells From Changing

Jan 31, 2013

In spreadsheet 1 I have a bunch of data, no formulas or anything, but data I need. I created spreadsheet 2 to take parts of S1 and have set links to cells in S1 so that when the data there is changed S2 gets updated automatically for me.

My problem is that when I add or delete rows or columns to S1 it's messing up my links in S2, not showing the right data. Issue with my linking that will tie the cells together when rows or columns are added or deleted.

View 1 Replies View Related

Changing Formula In A Number Of Cells

Mar 10, 2013

I've created a user form to enter some values in a few adjacent cells. When the user clicks on a button, I want several other cells to be loaded with special formulas that refer to the new values. This happens on a row by row basis. First, a working formula in that cell which is AB5 is:

Code:
=IFERROR((IF(AK5

View 1 Replies View Related

Changing Fill Color In Cells

Jun 23, 2014

I have no knowledge of VB programming and the conditional formatting seems limited. I want to change to the color of cells to yellow if the cell value is greater than 80 but less than 99, and if it is 100 or greater to fill red. Is this possible and if so can it be applied to a range of cells?

View 3 Replies View Related

VBA Code - Color Changing Cells

Apr 29, 2009

I am trying to create a model that has a mixture of conditional formatting and data validation formulas within it, but have run into a problem in one area. Essentially, cell E10 is a Validation which pulls a drop down list of names. One of the options in this list is "Other".

I want to create a VBA code to make sure that cell E12 will get rid of any input, turn grey (color index = 15), and potentially lock (if possible!) if the "Other" is chosen by the user in cell E10. If any other value is chosen for cell E10, Cell E12 needs to remain unlocked and white (color index=2).

View 9 Replies View Related

UDFs Recalculating And Changing Cells

Aug 18, 2009

I have been asked to look at moving a very large set of pricing sheets from Excel 2000 to Excel 2003. In the progress of this I have found that the functionality for a UDF in a cell to change/recalculate any other cells has been removed in Excel XP, whereas it was available in Excel 2000. The amount of work required to refactor the code is very large, and before starting on it it would be good to find out if there is a workaround.

The Sheet works in the following way:-User enters values, clicks a button to run a Macro,-Macro calculates all the ranges required to return a price-In many of the cells it is calculating are Functions which go and look at a large number of cells to calculate the price, sometimes writing to other Cells and sometimes having to recalculate other cells-As it is such a large sheet we can't simply calculate all cells before we tell it to price, as they are not all needed and so aren't calculated unless needed for performance reasons.It would be a lot of work to move the functionality from the Functions to the initial macro call, though this would solve the problem. Is there any other workaround?Macro security is set to low.The Errors I receive are the following:The UDF will hit a line like Range("DataRange").Calculate and this will raise a "Calculate method of Range class Failed" error. If it hits a line like Range("DataRange").Value = 1 this will raise a "Application-defined or object-defined error"If it hits a line like ActiveWorkbook.Names.Add Name:="This_Name", RefersToR1C1:="=Sheet1!R8C2" then it also raise a "Application-defined or object-defined error".Any of these run from a UDF in Excel 2000 works.I have a sample workbook if this isn't clear

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved