what needs to be changed on this code to only apply once for the row and not over and over again.
Dim Cell As Range
If Application.Intersect(Target, Range("ActivityRange")) Is Nothing Then Exit Sub
Application.EnableEvents = False
For Each Cell In Range("ActivityRange")
If Len(Cell.Value) > 0 Then Cell.Value = Cell.Value & Chr(10)
Next Cell
Application.EnableEvents = True
I found the following function in an old thread.
Public Function cleanString(fNameStr As String)Dim i As IntegerConst BadChars = "=+/'*?).,#%~!($[]÷™©" For i = 1 To Len(BadChars) fNameStr = Application.WorksheetFunction.Substitute(fNameStr, _ Mid(BadChars, i, 1), "") Next i cleanString = fNameStr
End Function
How would this be modified to work as a macro on selected cells (with selection?) I lost the formatting
Is it possible to use the same macro when ranges have been changed? Attached is a sheet that I update frequently (rows will change day to day, not columns) and the goal is to have a dynamic macro that sums the rows highlighted in yellow and red. Is this possible?,
View 4 Replies View RelatedWhat my code needs to do: It needs to verify data in column rows say for this example columns A to C and infinite rows. It needs to verify the data in this order A1, B1, C1, A2, B2, C3 etc. (One of the part I have problems to do) It also needs to add to a row/cell "1" when certain conditions. (In the same line as the last checked data in the column "D" say for exemple last data that was checked is "A3" well the 1 must be written in "D3". The conditions are simple the first Data the macro encounters must be higher than 0.25 and all following data must be higher than 6, whenever the next data is lower than 6 or empty add 1 to the corresponding D row and restart at the 0.25 cell "checking".
View 2 Replies View RelatedI'm using a macro to drag down a formula across a worksheet then again further down the worksheet which is working ok but I know there has to be a better way of doing it. At the moment every time I add a new column I have to edit the macro over and over and its getting out of hand. I know there must be a way of rewriting the macro into a loop but my skills are obviously still new.
Here's the macro:
[Code] ......
This continues over to column AO so far then I drop down a few rows and do it again:
[Code] .....
I think I need to set variables that set the row and column each time. maybe a "drag formula one column at a time from row x to row y until column header is empty then move to the new row and repeat"?
I have a code that clears the content of a cell if the value of that cell exceeds two.
Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Cells(1, 1).Value > 2 Then Cells(1, 1).ClearContents
End Sub
My problem is the value of this cell comes from a function and changes every second automatically (linked to a data feed). So I'm not changing it manually, therefore my code is not working unless I touch it. I just wanted to ask if I can add a code onto this which checks the values and runs the ClearContents macro if there is any change.. I've got a few sheets like this so I need this to run in the background..
I want a vba macro which performs some thing like this. I think probably this can be done by using InStr function, the macro attached here just find the exact same value and shows the result but i want similar values,
Code:
Sub a()
lastrow = 10
For arow = 11 To 16
[Code].....
Code:
Sub appointment_nieuw()
With CreateObject("Outlook.Application").CreateItem(1)
.Subject = Range("C3")
.Start = DateValue(Range("A3")) + TimeValue(Range("B3"))
.Duration = 0
.Location = Range("D3")
Dim cell As Range
For Each cell In Range("F2:H2")
.body = .body & Space(2) & cell
Next
.Save
End With
End Sub
I have this macro that works great, but every time I have a different appointment. I have to go into VB editor and change the ranges for the subject, datevalue, timevalue, location and body.
Can I get a text box (or something better) to pop up and I enter the ranges for the 5 in it and have it change in the macro?
I have button in the Excel sheet.When I click the button the following code got triggered.
Sub Button1_Click() 'YieldCurveGet
Dim arrayData As String
Dim CurveString As String
'arrayData = "Test,Test1....." '(for eg)
arrayData = WorksheetFunction.RTD("OrcExcel.RTDServer", "", "YieldCurveGet", "AUD yield curve", "AUD", Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null, Null)
CurveString = Split(arrayData, ",")
i = -1
For x = 1 To (UBound(CurveString) / 2)
i = i + 1
range("C" & x) = CurveString(i)
i = i + 1
range("D" & x) = CurveString(i)
Next x
End Sub
After triggered get invoked I need to set value of "arrayData " from VBA to Excel.Iam not sure what's going wrong.I cannot see the value in the Excel.
Is there any way to create a Macro that is any cell in column D has the word Shop it would change the adjacent word in column E from Roof Time to Shop Time?
View 1 Replies View RelatedI have a workbook that has a saved range. I created it with the Name Manager. See below:
[Code]....
When it looks like that the VBA works great and creates my pivots. But after I run my first macro to mess format my source data the range ends up looking like below:
[Code] .......
It is for some reason changing the "A" to "Y".
How I can get it to stay with the original data?
Is there a way to change the value of cell A1, for example, from one value to another, hit the enter key, and activate a macro this way.
A couple of qualifications:
- the value in cell A1 will never be the same (that is it could be -23.43 or .12)
- I can not simply tie the macro to the "enter" key as there will be numerous cells (A1, B3, C90 and so on) in the same sheet that I will need to do this with, each tied to a different macro.
I have a calendar I have developed that highlights the current date and opens by default to the current month. Each worksheet is a seperate month. The current date highlighting is written with a public macro and the opening to current month is a private macro. The problem comes when this workbook is shared and the other users have to agree to accept my macro because of security. I would like to bypass that requirement and just have the workbook stand alone without the permission.
View 5 Replies View RelatedIs it possible for excel to monitor Row J for a letter "Y". If a "Y" is put into a cell in row J a macro runs. If the "Y" was in column 6 I need the macro to copy A6 B6 C6 D6 E6 F6 etc to other cells on a different worksheet.If "Y" was in column 7 it will copy A7 B7 C7 etc to the same other cells on a different worksheet.
View 14 Replies View RelatedI would need a macro what would change this format (15 Jun 2009) in cell B2 to 2009.06.15.
View 5 Replies View RelatedI have a template work book that has several worksheets with numerous formulas thorughout.
For example;
=SUMPRODUCT(--ISNUMBER(SEARCH("MCSH",P9:P218)),--ISNUMBER(SEARCH("HWD",G9:G218))).
When I set up another template for a different crew I manually have to go through the entire work book and change the crew identifier (MCSH) in every formula.
I have a worksheet where I want the to change the collor of a range of cells in accordance to the value in another range of cells.
So if the value is "Gron" in cells C4:C27 then I want cells J4:J27 to return the color green. If, however, the value is "Rod" in cells C4:C27 then I want cells J4:J27 to return the color red.
I am trying to write a Macro to allocate a certain cost across thousands of orders. The number of orders will obviously change monthly. The cost is relatively small, and when divided evenly by the total orders needs to be rounded up to the nearest cent (Typically $.01 - $.02)
I then need the cost to be insered in a colum running next to a total cost column, but I need it to stop when it reaches the total cost and just start adding zeros to the rest of the orders so as not to overcharge.
Not sure if I need to incorporate solver somehow. I figured I would reference the allocated cost from a cell in the worksheet but not sure how to insert any algebraic logic into a macro.
I would like to write a macro that performs the following function:
I have a value in cell A1
In cell A2, I have the formula "=A1"
I want to make it so that cell A2 can never be directly changed; the only way to change the value in A2 is by changing A1. A2 should always equal A1.
I want a message box to pop up and alert the user whenever they attempt to modify A2, instructing them that if they wish to change A2, they have to change A1.
I had written this macro, and it kinda does the trick:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("a2") Range("a1") Then
MsgBox "text goes here"
Range("a2").Value = Range("a1")
End If
End Sub
When I attempt to change cell A2, I get the MsgBox popup and it works how I want it to. However, when I alter cell A1, I get the same popup before cell A2 updates (to be precise, the popup occurs after I click another cell). I would like this to be immediate and without a MsgBox.
I have a worksheet called "Roster" with a list of names from D7:D17 each person on the list has a separate sheet that is called by their name. the sheets are not linked up. the names were just manually typed into the list and into each sheet name.
If any name is changed on the list on "Roster!D7:D17" i would like the sheet that has that name to change as well.
This is the code that i was sent, but i do not know enough about VBA code to understand exactly what is happening, thus i cannot diagnose the problem. I placed the following code into the page "Roster" (by right-clicking and then pasting the code) then i closed, but nothing happens. I can mess with the code and get an error message. but that is about it. error messages usually say something about the debugger, or runtime error or something.
there is the
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
OldVal(0) = OldVal(1)
OldVal(1) = Target(1).Value
End Sub
I have created a workbook. That has 35 worksheets within it. I have created a series of buttons and put in a macro code so that when the user clicks on the button it changes the active worksheet to what they clicked on.
So basically when they click button b it changes to worksheet b and if they click button c it changes to worksheet c, ETC.
The problem I have is that since it is a macro it works fine on my computer but when it is sent to other users, because of security settings on their pcs it will disable the macro [thus the buttons will not work or show up]. I have created a digital trust certificate for it. However it is alot of steps to install this for the basic user. Is there a way to create a button that will do what I want without using a macro code. In that it will be able to go to many different users and wont have to worry about the buttons not working because of security settings?
I’m wondering if it possible to have a variable in a Formula. I was looking around, but non of the other examples I found was working. The code I was trying is:
Sub All()
Dim lngDataRows As Long
Dim lngDataRowsSum As Long
' add sum
lngDataRowsSum = Range("A5").End(xlDown).Row
Range("A" & lngDataRowsSum).Offset(1, 0).FormulaR1C1 = "Sum"
Range("M" & lngDataRowsSum).Offset(1, 0).FormulaR1C1 = "=sum(M6:M & lngdatarowssum)"
End Sub
Another code I tried was from this thread
Sub All()
Dim lngRowsBottom As Long
Dim lngRowsTop As Long
' add sum
lngDataRowsSum = Range("A5").End(xlDown).Row
Range("C10").formula = "=sum(R["&lngrowstop&"]C:R["&lngrowsbottom&"]C)"
End Sub
The error message is: “Compile error: Expected: enf of statement” and the part “[C:R[“ is highlighted. Tried various ways to solve it but nothing was working.
Does anyone of you know how to get it up and running?
I'm trying to do what I thoughts was the simpliest thing, but for some reason can not manage.
I try to change to value of a checkbox, by a code, without re-running the CheckBox_Click () Macro. I have put a checkbox in a worksheet, and when tickmarking it, a msgbox will pop up (one msgbox for tickmark on), and you can press Yes or No. Pressing No, I will sett the Checkbox.value = False. The problem is, when I use this command, the checkbox_click macro will run all over again. Now, the checkbox is False, and antother msgbox will pop up (another msgbox for tickmark off). The results is then that I first get the msgbox I want, but it is followed by the msgbox for tickmark off, which should only pop up when the checkbox is ticked off manually.
Code is something like follows:
Private Sub CheckBox1_Click()
Dim mySheet As Worksheet
Set mySheet = ActiveSheet
Application. ScreenUpdating = False
I am writing/creating macros and I want to create one that will automatically run when a cell value is changed to a certain entry.
View 2 Replies View RelatedI'm trying to take 5 inputs that are all in text format and inputs have fixed options what i need is a macro that will take them and turn them in to the relevant outputs. there is a select amount of combinations and i've been asked to do each combination as a separate macro or sub macro.
What I have so far is;
If C6 = "Panel plate" And D6 = "24 by 21" And E6 = "<1.59" And F6 = "N/A " Then I6 = "120" And j6 = "4" And L6 = "120"
End Sub
A B C D E F G H I J K L
1
2
4
5
6 Panel plate 24 by 21 <1.59 N/A
7
8
9
10
(Doesn't seem to work)...
If those four cell match up then i need I6-L6 to line up with whats required.
If they don't equal that i need it to stay clear.
I also need to add the same macro with different options.
So I found a macro that does something similar to what I need.
I tried changing the data range and input column but it doesn't work.
What the macro does is I type whatever name into the msg box and it will copy and paste all the rows that contains the name to a different sheet.
Here is the macro:
VB:
Sub test()Dim vl As String, res, sh, myrange As Range
Application.ScreenUpdating = False: vl = Application.InputBox("Enter value for Column B", Type:=2): If vl = "" Then Exit Sub
[Code]....
i have a workbook that is doing a copy and paste between 2 workbooks.
the trouble i am having is every month workbook a changes to be the name of the current month and year workbook b never changes. so when a change in month happens the macro stops working due to new workbook name.
how could i have the macro reed the name of the work book and input that name into the necessary locations withing the macro.
I have an excel sheet in which many cells have a background color of Green. These cells are located all over the sheet. I want to change the background color from Green to Red not affecting the color of other cells in the sheet.
I will be realy really thankful, as I have to do this exercise for more than 50 worksheets.......If I start doing it manually by selecting each celll with green color background and changing it to red.....you can well imagine my condition.....my life would get shorten significantly while doing this.
I am trying to copy part of a macro I use in one workbook which has a button which when clicked initiates the macro and changes the text displayed on the button from "Selection tree - On" to "Selection tree - Off". The code used in the original workbook (which functions ok) is:
View 2 Replies View RelatedMade a macro to Copy a value and paste is as "Special" for Value only.
The problem is it won't function correctly Unless I force a switch to the sheet where the calculations are. (Which I want to avoid)
The current code is: