I am currently using the STDEV formula. Is there a way, that i can make
the formula use data from nonblank cells, only. For example: A1, A2, A5 will
have numbers listed. A3 & A4 are blank. Can i get the formula to use only
A1, A2, & A5?
Im recieving an error saying that i have too many levels of nesting for my formula
Is there any way to rewrite the formula i have here?
=if(I1>99,0.5,
if(I1>89,0.45,
if(I1>79,0.4,[code].....
I had the first and third argument working properly but am running into difficulty when I tried to enter the middle formula.
If A1 + B1 = 0 then "0"
OR
If A1 = 0 AND B1 is greater than 0 then give B1's value times .01
If neither of those are true Then A1 minus B1, divide the result by A1 and then multiply it by negative 1.
=IF((A1+B1=0),("0%")*OR,IF((A1=0 and B1>0),(B1*0.01),((A1-B1)/AI*-1)))
The enclosed spreadsheet includes a couple formulas I’m having trouble with.
The questions themselves are detailed in the document.
I want to accomplish a few things in one cell. The basics are this:
I want to pull the lowest numbers from a given sample. The sample needs to have a time component (10 lowest out of the most recent 20 results). Those numbers are to be averaged. That average is to be multiplied by .96, then that final yield needs to be truncated to 1 decimal.
Now, I'm not sure this is possible or not. But, if it is, I want to also select the amount of numbers I pull from the sample to average to be based on the sample size itself. For example, if there are 10 results in the sample size, I only want to average the lowest 3 of the 10.
Is it possible to formulate all of these rules into one cell?
I need a formula that will determine if a line is active or expired by first looking at the category and then looking at the number of days. (While still incorporating the ISBLANK section of the current formula.)
For Example: If the category is either FWW or FWW Ext then the line will expire after 365 days. If not, then it will expire after 180 days.
I've attached a sample spreadsheet.
Book2.xlsx
I have the following formulas which when I try to put in excel, it says I have too many levels of nesting:
=IF(K4="","",IF(AND(Hta_1>=D4,Hba_1<=D4,Hta_1<>"",Hba_1<>""),1,IF(AND(Hta_2>D4,Hba_2<=D4,Hta_2<>"",H ba_2<>""),2,IF(AND(Hta_3>D4,Hba_3<=D4,Hta_3<>"",Hba_3<>""),3,IF(AND(Hta_4>D4,Hba_4<=D4,Hta_4<>"",Hba _4<>""),4,IF(AND(Hta_5>D4,Hba_5<=D4,Hta_5<>"",Hba_5<>""),5 ,IF(AND(Hta_6>D4,Hba_6<=D4,Hta_6<>"",Hba_6<>""),6,IF(AND(Hta_7>D4,Hba_7<=D4,Hta_7<>"",Hba_7<>""),7," No reinforcements"))))))..........
=BDP("067901108 cn corp cusip","px_last")
is there a way to insert 067901108 cn corp cusip from a different cell into the formula?
067901108 cn corp cusip <---A1
067901108 us corp cusip <---A2
something like this?
=BDP("A1","px_last") which equal to =BDP("067901108 cn corp cusip","px_last")
=BDP("A2","px_last") which equal to =BDP("067901108 us corp cusip","px_last")
I have an excel work book that I want to extract certain info from Each tab where in the result tab I use this formula to get required data from another tab.
I has about 24 tab , in the 25th one i collect data from all previous , using below formula inside each cell to get
=INDEX('2014 wk12'!$C$1:$C$17,MATCH("Total LTD Result",'2014 wk12'!$A$1:$A$17,0))
Where 2014 wk12 is a tab name , so , it works fine
excel iss.png
What i want is t replace the sheet name which in previous example is 2014 wk12 with relative name in column A
The closest i have in mind is to make it as below ( it is not working ) so what shall be the working formula of the below
=INDEX('Tab name from Column A '!$C$1:$C$17,MATCH("Total LTD Result",'Tab name from Column A'!$A$1:$A$17,0))
=StacServer|Windham! '40720'
This is the format of an external call that I am trying to run. I need to change the number (40720) based on the day of the month (i.e. if its the 5th, then use 40725.
I am attemting to use a function to do this and passing in the device name (Windham) and location (40720). Unfortunately, I have been unable to get a String to send back as a formula. My attempt was as follows :
= Location ("Windham", 40720, "D7")
Function Location(name, num, cell)
Dim psDay As Integer
Dim psLocal As String
psDay = Day(Now)
Location = (Range(cell).Formula = "=StacServer|" & name & "!'" & (num + psDay) & "'")
End Function
I tried to count rows from one sheet and to put this value as counter in VBA For-Next loop.
VB:
Sub Copy_ID()
'
' Copy_ID Macro
[Code]...
It ends with "Invalid qualifier" error on the counter.Formula line. I attached sample excel with macro that I listed here.
I have a challenge with conditional formatting. I have products A-K with sales current year and last year and want to have year on year growth. I want to have one column where the cell formatting changes based on data validation.
Let's say product A sold 60 items CY and 50 LY meaning YoY variance is +10 items or +20%. Hence, if the relevant cell says "%" then the YoY figure should say "+20%" (formatted as a percentage) and if "VALUES" then YoY should be 10 (formatted as numbers/absolute values).
Remember also that YoY growth can be +100% (or more), 0% and -100%.
I know about
(isnumber(match({,12054, 12056, 12058}).....
How could I express a range of numbers to identify 12054-13001. How would that expression be written?
LastRow = Worksheets("Sheet1").Cells(Rows.Count, "K").End(xlUp).Row
For i = 2 To LastRow
Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)"
If (Worksheets("Sheet1").Range("AE" & i).Value < 1.5) And _
((Worksheets("Sheet1").Range("K" & i).Value > 0) Or (Worksheets("Sheet1").Range("L" & i).Value > 0)) Then
Worksheets("Sheet1").Range("AE" & i).Font.Color = 255
End If
Next i
My loop here works just fine, and my Formula works in testing. However when I move my formula inside the loop I get an error.
Is the syntax wrong in this line = Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)"
For some reason Absolute $ or INDIRECT is not working inside my formula when I add a row to my chart. Formula keeps adjusting.
Here is my formula...=IFERROR(LARGE(IF($B$5:$B$50=$K108,$A$5:$A$50),1),"")
$B$5:$B$50 goes to $B$6:$B$51 AND $A$5:$A$50 goes to $A$6:$A$51..... it can't do that, throws my counts out, needs to stay in this range B5:B50 and A5:A50 when I add a row to chart
Also when I use INDIRECT
=IFERROR(INDIRECT(LARGE(IF("B5:B50"=$K108),INDIRECT("A5:A50"),1),""))))
I keep getting a error with =$K108, which is a cell reference in my formula which the formula needs to look at
So what do I do, or what formula do I need to use to stop this from adjusting as I add rows to a chart to stop formula from adjusting?
I'm trying to use some data from other workbooks in a formula. However, the path to the other workbooks we are using will often change.
I think that the user can enter the path to the other workbook in a cell in this workbook. However, I'm getting errors in my formula and am not sure how to make the formula use the cell to reference the location of the workbook that has the data that we want.
This is what I have, but it's giving me an error.
=Countif(' & 'Instructions'!B9 & Planning'!$I$3:$I$100, "C")
'Instructions'!B9 contains the location of the other workbook in the format \path[filename] Planning'!$I$3:$I$100 is the location of the range in the other workbook.
I am making a buiness card request form, which I have attached. On the Master Sheet (Sheet 1), the user enters in his/her personal data, such as his name address, phone number, etc. After he/she finished entering all the relevant data, Business Card Layout (Sheet 2) automatically populates and shows the user what their business card will look like.
Everything works fine, however I just realized that the contact information might vary from person to person. Right now, a person can enter 5 different contact information, but most of them will probably only choose four.
I wanted to know how to shift the cells down if the user does not fill out one of the contact information.
How do I change a Positive number into a Negative number inside a cell formula?
I have a figure in Cell AE 101 which has the positive number 141
I have another cell W1 which has the positive number of 437
I want to create a formula in cell X1 that takes the number in cell AE 101 of 141 and convert the number inside the formula of 141 into a negative number of -141 and then subtracts that number from Cell W1 of 437 leaving an equation inside the formula to read. 437-141 = 296
Since the number in Cell W1 changes all the time and the number in AE101 Changes all the time the new formulated number in X1 will change all the time too as the cells get updated.
I placed this formula in cell A1 in workbook number 2which is suppose to grab what ever name is in cell A4 of workbook 1 However if the cell is blank it is returning a "0"I want it to be blank if there is no name in the cell?
View 4 Replies View Relatedis there a way to get the unique entries from a list with out blanks using only one formula?
currently i use
=if(countif(a$1:a1,a1)=1,a1,"")
to get unique entries
and
Function NoBlanks(DataRange As Range) As Variant()
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' NoBlanks
' This function returns an array that consists of the non-blank values
' in DataRange. The function must be array-entered into the complete range
' of worksheet cells that are to receive the result. For example, if
' you want the results in B1:B10, select that range, type.................
I have searched the threads high and low, but no one seems to have come across this issue: My formula works fine untill it comes across a blank in Comparison!E16: =IF(AND(Comparison!E14=Comparison!E15,Comparison!E15=Comparison!E16),"",IF(AND(Comparison!E14=Comparison!E15,Comparison!E16=""),"") IF(AND(Comparison!E14<>Comparison!E15),Comparison!E14))
I am comparing cells from a previous sheet onto Comparison so that I can see where the discrepancies lie.
I want to:
return nothing if all the cells match;
return nothing if the first two match, but the third is blank;
return the value if the first cell isn't matching
keeping in mind that this is only for the top cell: Comparison!14 - I will then have to bring it down to 15 and 16
I have a list of data with 2 column. One is a column of unique values, the other column has a lot of blanks.
I'd like to auto generate both columns without any of the blank data from column 2. I've attached a mock spreadsheet of what I'm invisioning.
My below countif formula is counting the blanks how can i revise to not count the blanks?
=COUNTIFS('Rep Summary'!$A:$A,$A8,'Rep Summary'!$T:$T," ")
I have a very basic formula, and I'd like it to ignore a blank cell. The sheet has cells A1, B1, and C1. I want the formula to subtract A1 from B1, and display the difference in C1. B1-A1=C1
Currently, if A1 has a value (it always has a value in that column) and B1 does not, C1 shows the negative value of A1. Ex: A1= 100, B1= blank. [blank cell] - 100 = -100
I want C1 to show nothing unless there's a value in B1.
How do I construct the formula so that it doesn't do the calculation for blanks?
I am in need of a solution (probably VBA) that can fill a range of cells with a formula IF they are blank. Ideally that range is a named range I can define in Excel. If that is too hard, then a hard coded column I hand-edit the script for is tolerable. Also, ideally, this script auto-executes whenever data changes on the sheet.
You formula I will populate is:
=IF(ISNA((VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1),"",(VLOOKUP(B33,$A$32:$L$43,12,FALSE))+1)
..but a simpler formula can be stubbed in.
NOte that it does have relative references, so the script needs to adhere to normal EXCEL conventions of enumerating cell references.
If the script points to a refernce cell that contains the formula that is uber.
Maybe it should do copy and paste instead of a string replacement in order to leverage EXCEL's referencing?
I'm stuck on this, and this would be VERY useful for many of my sheets to be able to point to a refernce cell containing a formula to fill in.
I want to create a validation list with value comming from formula and I got blanks line. I have to create a dynamic list, I can have 15 possibility and it came from a lookup formula. When I choose the 15 cell with the lookup formula it show the empty cell. I did a exemple of my problem. You can check the attachement to understand my problem in the cell C1.
View 2 Replies View RelatedI have a row with numbers
1
2
3
5
6
7
8
What is the formula to get then on another column as
1
2
3
5
6
7
8
So have large spreadsheet with grid of elevations. Each column/row is 1 foot grid. There are blanks in it where there was no elevation data available. I need to interpolate those elevations using the surrounding known elevations. I can setup the interpolation just fine using a circular reference but what i am having trouble with is getting formula into all the cells. I need to replace blanks with formula that averages all four cells around it.
This will result in circular references that will interpolate from known points nearby. So for example if cell D4 was blank formula needs to be
=(D3+E4+D5+C4)/4. D5 would be =(D4+E5+D6+C5)/4.
I have been playing around trying to make a macro or something to do this but am not having any luck. Basically need to find/replace all blanks with formula above but so the formula references the cells around it properly.
I'm using the following formula to look at a range of cells and return the most common text entry. The formula works fine as long as there is text; if there are more blank cells than entries, then it returns a 'blank' and my formula cell is empty. How to clean this up so that it ignores blank cells?
=INDEX(C2:C11,MATCH(MODE(COUNTIF(C2:C11,C3:C11)),COUNTIF(C2:C11,C2:C11),0))
I am looking for a formula for the following:
If there is nothing is U6:W6 return blank
Otherwise sum the contents of Bf6:BH6 and divide by the number of cells that are not empty in the range U6:W6 (to get an average of only the values in that range not including blanks).
