I need a VBA code to find the nearest biggest number and nearest lowest number between the data of D2 to H2. In the attached file, I have mentioned my required output (Column A and B - blue highlighted)
View 2 Replies
In cell A1 I have a number. I want a formula that looks at that number and then looks at row C on sheet2 where there are rows and rows of numbers. I want the formula to return the nearest match to the number in cell A1.
View 6 Replies View Relatedi have a table with multiple codes and quantities along with other info in it. What i need is to take each MATERIAL CODE and its lowest quanity and transfer it to another cell. I have tried using DMIN but can not quite get it. It stopped working after the 6th one.
103057300 -800
103057300 -700
103057300 -250
101789050 50
101789050 -70
101789050 -90
So i want to to take the following quanities that are in this font and put them into a separate cell.
I have three columns with 1 number in each row. I'm trying to find a number, and if that number does not exist in the 3 columns I would like to find the next smaller number. The numbers have up to 4 decimal places. i.e. 16140.0311.
So for example if a user searches for 15950.012, and that does not exist but 15950.009 does with no numbers in between then the answer returned would be 15950.009. Auto Merged Post Until 24 Hrs Passes;I should probably mention that I would like to insert a new line with the number originally searched for, after the number found.
i.e. search for 15950.012. Not found. 15950.009 next lowest. Insert new line after 15950.009.
I'm holding a Reverse Auction where people pay a dollar to place a bid, BUT the twist is they are giving me a number that they how will be the lowest number but it has to be the only occurrence of that number (greater than 0).
During the party people can guess as much as they want to pay. I think i'll use a spreadsheet with their names in column A and go out in the row with however many cells for how many numbers they guess (so there would be blank cells in the overall range of the whole list if one guy buys 10 numbers and another only 1, for example).
So, i need a cell at the bottom that tells me the lowest number that wasn't guessed more than one time.
I've found how to FIND duplicates and the lowest number but i don't know how to write it so that it discards the duplicates.
For this example, A1 is the given at 19.875 I am trying to get A2 to net a result of 19.5. A2 is to net that result by searching through cells B1:B14 and finding the nearest equal or lower number. If A1 is less than 13.5 a result of "error" should be generated in A2.
B1=13.5
B2=15.5
B3=17.5
B4=19.5
B6=21.5
[Code]...
I have a hockey scoring sheet, which has player names, goals and assist with it. What I want to do, is to print in to a different sheet player's name and goal amount, who has scored the most goals.
Example of a scoring sheet:
I need to round numbers up in a spreadsheet to the nearest .05 . For example, I would need to change 1.502 to 1.55 or 1.556 to 1.60 .
View 3 Replies View RelatedI have an overtime spreadsheet where I calculate how mush I'm paying on vouchers, as they only come in lots to £5.00 I want to round the figure to the nearset £5.00, doesn't really matter if I overpay as it will even out next time, what's a basic forumula to work this out?
View 6 Replies View RelatedI have numbers ranging from 1 to 90 that need to be rounded the nearest whole number that is divisible by 5.
Expected outcome
1 should round up to five88 should round up to 9072 should round down to 70
Round - modified for multiples of five* - works perfectly well for number that are greater than or equal to 3. However, 1 and 2 round to zero.
I have tried using IF to have the formula ROUNDUP for 1 and 2 and ROUND for 3 and up with no luck.
Every result I have seen with the Google says the solution is "=ROUND(A1*0.05,0)". This does not work.
VBA is an option for this workbook.
*ROUND(A1/5,0)*5))
I guess I have an odd rounding up query. I want to know if its possible to make excel round up a number to the nearest number from within a list of numbers.
For instance my list could be
10
12
15
17
19
22
25
30
35
42
The numbers arent odds or evens or multiples of anything so I'm guessing there won't be an inbuilt function to do this but is there anyway I could get to the answer in a more round about way with helper calculations??
I guess I could use the following -
=IF(A1>42,"Error",IF(A110,A112,A1
I Need Formula To Number To The Nearest Number In Te Tabel
View 9 Replies View RelatedI have a cell that returns a value...lets say "439". I need the cell to automatically round the number up to the nearest 25th. Like this:
439 would become 450
521 would become 525
551 would become 575
I have a cell that is going to be used for the quantity of a certain item. I would like to dummy proof this sheet as much as possible so that if someone puts in 21.5, that it will do something like change the value to either 21 or 22, since there can't really be a .5 of this item.
View 5 Replies View RelatedI am doing a huge price increase for a price book and need to rasie each price by 3% and have it rounded to the nearest dime.
Is there a formula to do this in one go and not have one cell with the rounded price and another for the nearest dime price.
We are trying to find the correct formula to round number to the nearest even number. In the attached example, 0.105 should round to 0.10 since the zero to the left of the five is even. If the problem was 0.115 then the answer would be 0.12 since the one to the left of the zero is odd.
I'm trying to use vlookup function in table 2 referencing table 1 using the approximate parameter. However, an approximate vlookup value is by definition the closest *least* value. Is there a trigger of some sort to locate the closest *greatest* value as well?
For instance, if the lookup_value in table 2 is 2.450 but the referenced table 1 only has 2.445 and 2.475, I will only retrieve the respective value related to 2.445 -- how would I retrieve the other value at 2.475?
Essentially, if a lookup_value rests in between two values of whatever is being referenced, I am trying to average those two closest numbers. Is there a function I've overlooked that may help with this?
i have two columns in tow seperate workbooks to be compared:
in say inp.xls, there is a column(COL A) containting a lot of entries(numbers) - roughly around 60,000. Now in the other workbook, say mem.xls, i have a smaller set of numbers in a colum(COL B) - roughly around 300.
Now, the problem is, COL B, has numbers which may or may not match with numbers in COL A.
* If there is a match(between COL A and COL B), the row number at the match in COL A.
* If there is no match, the row of the closest number (in COL A) before to the number in COL B.
Example:
ROW COL A-----> COL B---------->
1 2184058252 2184276560
2 2184058280
3 2184058296
4 2184058312
5 2184058320
6 2184773640
7 2184774216
8 2184774272
9 2184774424
Now, i want to find 2184276560 in COLA, since it is not there, i want it to return the row number of the closest(previous) viz. row 5(2184058320).
Now, since this is a huge comparision set, im wondering what is the best way to do it. Im using VBA....
I would like to round this number (3.5) to become 4, but by using this formula =CEILING(A1,0.5) the result will be 3.5
i need a formula that turns 3.5 to 4
when i use this formula =ROUND(A2,0.5), 3.5 becomes 4, but 3.2 becomes 3 not 3.5
i.e. a formula turns 3.2 to 3.5 and 3.5 to 4
I have 18 columns of numbers, I need to figure out how to highlight the lowest number in each column, only if it is a unique value... in other words, only if it doesn't match any other number in that column. I'd also like that number somehow paired up with it's row's indentifier and put somewhere in a report.
View 9 Replies View RelatedCode:
=IF(MIN(Sheet1:Sheet3!B1)=0,SMALL(Sheet1:Sheet3!B1,2),MIN(Sheet1:Sheet3!B1))
The above formula returns a zero value if there is a zero in more than one of the B1 cells in the worksheet range
I need the lowest number above zero in all the B1 cells across all worksheets in range.
I have a data listed from A1 to G1. What I want to do is
Check out all the numbers written in those cells, take the highest number among and write to the following cell (lets say A3)
also
Check out all the numbers written in those cells, take the lowest number among and write to the following cell (lets say A4)
I want to use the Small function on a set of cells that are non-contiguous. But I know that the Small function only works on an array, which cannot contain cell references. Copying the cells to a contiguous range is not an option, as some of the cells I want referenced are generated on the fly in a Sumproduct function. Is there some alternative I could use? I can use the Min function to get the lowest value, as it allows for references, and the Max function to get the greatest, but what about those in between?
View 4 Replies View RelatedI have an excel with column value as below(sample)
3
4
6
7
empty cell
4
5
3
1
7
empty cell
4
5
empty cell
and more...
Actually i want it to reduce others with lowest number among them.. and after every empty cell, it should find the lowest number again and reduce it from others.. this should repeat until the column data completes. after processing it should find as below
0
1
3
4
empty cell
3
4
2
0
6
empty cell
0
1
empty cell
Any macro or excel formula for processing such a kind of excel. Empty cell works like a delimiter..
I have in a range B10:B110 formulae that returns a number. When I try and use CF to highlight the lowest number, it does not trigger. Is it not possible to have both a formula and CF in the same cell, that triggers the CF.
The formula to return a number is
=IF(B$5
Formula to pull the lowest number that falls in Cells I2:L2 and the number must be 0 or Greater. Some of the numbers might be negatives and I am trying not to pull those numbers.
View 3 Replies View RelatedI have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
Items in Column A1 are calculated by (B2/4+5)*1.4 Items located under the columns 2000, 3000, 4000, etc... 10,000 are calculated by taking the top number, eg 2000/(A1 cell value)+the column B number. 2000/7+0 = 286 (rounded numbers)
I need to find an way to look up for x number (2000,3000,4000, etc...) find the smallest number in that column and then return the value in column A1.
Cell
A1 Number >2000300040005000600070008000900010000
70 2864295717148571000114312861429
84 24236148059971883795610751194
[Code].....
I want to create a formula that values if the number in the cell is in the biggest 25 numbers in the column and also check in another column the same thing.If the number is within the 25 biggest from the first column or the second then to give me the number of the cell. I created a formula but it is very large in order to apply for the 1st to the 25th biggest number. The formula is:
IF(AND(or(K16=LARGE($K$16:$K$152,1),I16=LARGE($I$16:$I$152,1)),K16<>0),K16,"") but only for the 1st biggest number of the columns.
i have one sheet of data (numbers)
How to find the biggest value in this sheet?
Is too many numbers...
example:
A1
1.12
3.14
5.16
2.11
the biggest is = 5.16
