Nth Lowest Number In Non-Contiguous Range
Aug 10, 2007
I want to use the Small function on a set of cells that are non-contiguous. But I know that the Small function only works on an array, which cannot contain cell references. Copying the cells to a contiguous range is not an option, as some of the cells I want referenced are generated on the fly in a Sumproduct function. Is there some alternative I could use? I can use the Min function to get the lowest value, as it allows for references, and the Max function to get the greatest, but what about those in between?
View 4 Replies
ADVERTISEMENT
Jun 9, 2008
Consider the following range (in my case a PivotTable):A1:E7
I create a Named Ranges that corresponds to column 1:3 and 6 from the range above. i.e : A1:C7,E1:E7
I need to find out the number of columns of my range, this is because it can change in the future, and I have an offset formula needing this information.
When i type =columns(MyNameRange) it returns #REF! as there are 2 areas in my Named Ranges. I am expecting 4.
I have written the a VBA User Defined Function that does the job, but I would like to know if there is no native solution to get this information.
Function TotColumns(rng As Range)
Dim Cols As Integer
For Each Ar In rng.Areas
Cols = Cols + Ar.Columns.Count
Next
TotColumns = Cols
End Function
View 7 Replies
View Related
Jul 28, 2014
need to understand the easiest way of highlighting the highest and lowest number in a range of cells several times in the same column.
As I said the cell range will be in the same column. So highlight the highest number green and lowest number red in cells a3 to a9 and then repeat the same process again in cells a11 to a17 and so on.the cell references are an example.
So I have several separate sets of numbers in the same column.
View 3 Replies
View Related
Mar 26, 2014
I need a VBA code to find the nearest biggest number and nearest lowest number between the data of D2 to H2. In the attached file, I have mentioned my required output (Column A and B - blue highlighted)
View 2 Replies
View Related
Sep 2, 2012
i have a table with multiple codes and quantities along with other info in it. What i need is to take each MATERIAL CODE and its lowest quanity and transfer it to another cell. I have tried using DMIN but can not quite get it. It stopped working after the 6th one.
103057300 -800
103057300 -700
103057300 -250
101789050 50
101789050 -70
101789050 -90
So i want to to take the following quanities that are in this font and put them into a separate cell.
View 1 Replies
View Related
Aug 1, 2008
I have three columns with 1 number in each row. I'm trying to find a number, and if that number does not exist in the 3 columns I would like to find the next smaller number. The numbers have up to 4 decimal places. i.e. 16140.0311.
So for example if a user searches for 15950.012, and that does not exist but 15950.009 does with no numbers in between then the answer returned would be 15950.009. Auto Merged Post Until 24 Hrs Passes;I should probably mention that I would like to insert a new line with the number originally searched for, after the number found.
i.e. search for 15950.012. Not found. 15950.009 next lowest. Insert new line after 15950.009.
View 9 Replies
View Related
Sep 16, 2005
I have 18 columns of numbers, I need to figure out how to highlight the lowest number in each column, only if it is a unique value... in other words, only if it doesn't match any other number in that column. I'd also like that number somehow paired up with it's row's indentifier and put somewhere in a report.
View 9 Replies
View Related
Aug 1, 2014
Code:
=IF(MIN(Sheet1:Sheet3!B1)=0,SMALL(Sheet1:Sheet3!B1,2),MIN(Sheet1:Sheet3!B1))
The above formula returns a zero value if there is a zero in more than one of the B1 cells in the worksheet range
I need the lowest number above zero in all the B1 cells across all worksheets in range.
View 3 Replies
View Related
Dec 4, 2009
I have a data listed from A1 to G1. What I want to do is
Check out all the numbers written in those cells, take the highest number among and write to the following cell (lets say A3)
also
Check out all the numbers written in those cells, take the lowest number among and write to the following cell (lets say A4)
View 9 Replies
View Related
Sep 9, 2006
I would like to be able to count the amount of entries in column C and depending on the amount group them in either groups of 3 or 4, all names would be unique...so if there are 14 names in the list they would need to be grouped in to two groups of 4 and two groups of 3, if there were 19 then 4 groups of 4 and 1 group of 3 etc to a maximum 50 people, the results could appearon a seperate worksheet say pasted on to the worksheet starting with the groups of 3 (so paste a group of 3 then skip 3 rows then paste groups of 4 skip 2 rows, the row skipping is to allow seperation and manual entry of extra data). There will never be groups of 5 or more and never less than 3
View 8 Replies
View Related
May 22, 2013
I have an excel with column value as below(sample)
3
4
6
7
empty cell
4
5
3
1
7
empty cell
4
5
empty cell
and more...
Actually i want it to reduce others with lowest number among them.. and after every empty cell, it should find the lowest number again and reduce it from others.. this should repeat until the column data completes. after processing it should find as below
0
1
3
4
empty cell
3
4
2
0
6
empty cell
0
1
empty cell
Any macro or excel formula for processing such a kind of excel. Empty cell works like a delimiter..
View 3 Replies
View Related
Jan 12, 2008
I have in a range B10:B110 formulae that returns a number. When I try and use CF to highlight the lowest number, it does not trigger. Is it not possible to have both a formula and CF in the same cell, that triggers the CF.
The formula to return a number is
=IF(B$5
View 9 Replies
View Related
Jan 8, 2006
Range:
C3,C14,C25,C34,C41
Criteria:
>0
sum-range:
C3,C14,C25,C34,C41
I can't get that to work since the commas in the range are throwing the function off.
View 14 Replies
View Related
Jan 8, 2006
range:
C3,C14,C25,C34,C41
criteria:
>0
sum-range:
C3,C14,C25,C34,C41
I can't get that to work since the commas in the range are throwing the
function off.
View 13 Replies
View Related
Aug 17, 2012
I know how to find the last row of a continuous range. it's simply:
Code:
someRng(someRng.Count).row
How do you find the last row of a non-contiguous range though? Assume the range is vertically laid out and I don't want to do any looping.
View 9 Replies
View Related
Apr 8, 2008
Is it possible to re-size a non-contiguous range? I'm guessing "no", and a Google trawl hasn't provided me with anything.
Here's what I'm trying to do:
dim mult_rng as range
dim rng2 as range
set mult_rng = range("A1:B1,D1:E1")
set rng2 = mult_rng.resize(rowsize:=10)
That is, my original range is comprised of non-contiguous cells in the same row. When re-sizing, I'm trying to increase the number of rows, but leave the columns the same.
Like I said, my gut instinct says that this isn't possible using the 'resize' property. Can anyone think of another method to use? My constraints are that the original mult_rng isn't always the same (and isn't always non-contiguous).
View 9 Replies
View Related
Oct 3, 2009
I want data to columns A, C and E, while I have important data in columns B and D. Should I make three queries? Should I make query and save the results to temporary place and then move all the results to those columns A, C and E?
Right now the copying happens like this:
If Not rsData.EOF Then
rngTarget.CopyFromRecordset rsData
Else
MsgBox "No records returned.", vbCritical
End If
So should I do
1) One query and move everything in the right places
2) Multiple queries
3) Something else
Does this depend a lot about how many results I expect? I'd say likely about 100, maybe less than 1500, never more than 10000
View 9 Replies
View Related
Sep 12, 2013
Formula to pull the lowest number that falls in Cells I2:L2 and the number must be 0 or Greater. Some of the numbers might be negatives and I am trying not to pull those numbers.
View 3 Replies
View Related
Sep 22, 2009
I'm holding a Reverse Auction where people pay a dollar to place a bid, BUT the twist is they are giving me a number that they how will be the lowest number but it has to be the only occurrence of that number (greater than 0).
During the party people can guess as much as they want to pay. I think i'll use a spreadsheet with their names in column A and go out in the row with however many cells for how many numbers they guess (so there would be blank cells in the overall range of the whole list if one guy buys 10 numbers and another only 1, for example).
So, i need a cell at the bottom that tells me the lowest number that wasn't guessed more than one time.
I've found how to FIND duplicates and the lowest number but i don't know how to write it so that it discards the duplicates.
View 9 Replies
View Related
Mar 19, 2013
Need code that will search non-contiguous range for first empty cell, paste data into found cell and data into offset cells and end search. If not empty, move to next cell in non-contiguous range. If NO empties are found in entire range, a msgbox.
Non-contiguous range: Range("B2,B32,B62,B92,B122,B152,B182")
Pasted data: 1st range into found empty, 2nd range into range offset of empty.
View 9 Replies
View Related
Jan 20, 2010
I'm trying to do a vlookup on a non contiguous named range.
I have a non contiguous named Range called "temp".
View 6 Replies
View Related
Jan 25, 2009
When I insert a line to select the range on the Worksheet it does select the range named as temp. However, the array does fill but only with the first part of the range eg in this case A7:C44.
My aim is to create an array of size point1A( all the rows in the multiple ranges, 3 columns).
Example of a Range to be assigned to the Array point1A. temp = "A7:C44,D7:F44,G7:I44,K7:M44,N7:P44,Q7:S44,"
View 6 Replies
View Related
Jun 4, 2012
I am trying to create a large range composed of smaller ranges. Some of these ranges may overlap so I want to make sure when I add cells to the range they don't already exist. I know how to make sure the same value doesn't exist in a range, but not the same cell.
View 2 Replies
View Related
Apr 13, 2008
I have a contiguous range of rows starting from row 5. ...It starts from row 5 but could end anywhere below.
The name of my Sheet is Tester.
Now in Tester, columns B,C, and D have numerical values in them. Using VBA, how can put in values in corresponding row of column A.
So if there are values from B1:D39 and B40 onwards is empty, then A1 will have value B1*C1*D1, then A2 will have B2*C2*D2 and so on until A39 = B39*C39*D39
**I need to write the code so the whole process is done fastest.The code may be long but the macro needs to run as fast as possible.
(Also, I remember using Screen.Updating = False when I wrote similar stuff many yrs ago. Would this be useful here?)
View 9 Replies
View Related
May 29, 2009
Is it possible, through VBA, to select the top right cell in a non-contiguous range? For example, I have defined A1, A3, and A5 as a range. How could I tell Excel to select A5 from within that range?
I am using Excel 2007.
View 9 Replies
View Related
Dec 17, 2006
I'd like to count non blank cells in 16 separate ranges (each range consists of 6 consecutive cells). The first range in the series is C9:H9. 3 cells are then skipped and the process is repeated with the next range, ie L9:Q9 then skip 3. The last range in the series of 16 is therefore EK9:EP9.
If the value of non blank cells = 2 in any of these 16 ranges then copy the contents of this range to C24:D24 in sheet " Record Form Games 3583". If C24:D24 is not empty copy these values to C25:C26.
If the value of non blank cells = 6 in any of these 16 ranges then copy the contents of this range to C22:H22 in sheet "Record Form Games 3583". If C22 is not empty copy these values to C23:H23.
The ranges colored yellow in the example workbook are the ones that need to be copied to the sheet Record Form Games 3583.
View 9 Replies
View Related
Aug 31, 2007
I am trying to have this loop go through colums of data and compare columns 3 and 4. Where there are differences, parts of the row are copied and pasted in a summary table.
My problem is the output to the summary table.
How do I control which cells in the row are copied? (I only want to copy columns 1, 3 & 4)
How do I control where the copied cells are pasted to?
Sub Change()
Dim r As Long
'Loop to Compare Values
For r = 4 To Cells(Rows.Count, 1).End(xlUp).Row
'Looks For Funds That Upgraded
If Cells(r, 4) < Cells(r, 3) Then
'Highlights the row
Cells(r, 1).Resize(1, 5).Interior.ColorIndex = 34
'Copies The Applicable Cell Over Into Column 7
Cells(Rows.Count, 7).End(xlUp).Offset(1) = Cells(r, 1)
'Places a note into column 5
Cells(r, 5) = "UPGRADE"
End If
If Cells(r, 4) > Cells(r, 3) Then
Cells(r, 1).Resize(1, 5).Interior.ColorIndex = 36
Cells(Rows.Count, 7).End(xlUp).Offset(1) = Cells(r, 1)
Cells(r, 5) = "DOWNGRADE"
End If
Next r
Columns("G:G").EntireColumn.AutoFit
End Sub
View 9 Replies
View Related
Dec 28, 2007
Is it possible to use a non-contiguous range for the criteria parameter of the DSUM function? I want to do something like this. =DCOUNTA(wholesale_all,"Assignment Date",D2:D3,G2:G3) This formulas won't work the way I have it typed, but is there a workaround to achieve the same result?
View 2 Replies
View Related
Aug 5, 2008
I am building a macro to conditionally edit cells that meet certain criteria within the current selection:
Dim FinalStr As String
If CheckBox3.Value = True Then
For Each cell In Selection
If cell.Font.ColorIndex = Range2.Font.ColorIndex Then
FinalStr = FinalStr & "," & StrConv(cell.Address, 1)
End If
Next
End If
FinalStr = Right(FinalStr, Len(FinalStr) - 1) 'To remove extra "," at the beginning
What I am getting from this macro is a string like "$I$27,$J$27,$E$28,$F$28" that I use later to edit that range, for instance
Range("$I$27,$J$27,$E$28,$F$28").ClearContents
It worked fine, however, I found later that XL cannot handle more than 20-30 individual cell addresses. The error msg I am getting is: " Method 'Range' of object '_Global' failed " Note that it won't be very practical to pick the cells and edit them within the same loop since there are several criteria times several edit options.
View 9 Replies
View Related
Jul 2, 2008
I am trying to place a formula in Cell "S5" that will look at sheet "audusd" in the entire Column D and return the Highest value.
View 9 Replies
View Related
