I need to take a specific action when a cell has an actual formula in it versus when it just has a "value". Is there a procedure or command which will allow me to identify if a certain cell has a "formula" (like =sum(a1: a5) ) or just a value.
View 3 RepliesI have got students mark list in Excel. I want the grading as under in the last column.
73% and above = A+
63% to 72% = A
53% to 62% = B
44% to 52% = C
35% to 43% = D
30% to 34% = E
<30% = F
Is it possible with VBA?
I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.
A1 represent a number of years and B1 represent gains or losses (negative)in dolars.
The way I see the logic is as follows:
If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)
If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.
On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.
I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:
If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL
Is there formula to use if I want an IF statement to add a date "TODAY()" to a cell if a corresponding cell is highlighted? I would search for this in the archives if I had a clue what to search for. "Conditional formatting", maybe?
In Col J "Appt. Date", I want to add today's date if the cell in Col C of that row is green.
How would that work? My worksheet is posted below: ......
I need a function that will use a column of text values and test these values
to see if one or more of the values exist in a single cell. If it does I need
the function to return true or false.
Ie. cell A1 contains the text "Jim Smith" the B column contains the test
names (column of test values ) ie. B1 is "bill" B2 is "fred" B3 is "jim".
Because Jim is in the cell A1 I would need the function in C1 to return the
value "true". If A1 contained the text "bob smith" then function in C1 would
return the value "false".
In cell A1 exists data. In cell A2, I would like to test A1 to determine if A1 is a formula or a constant.
Examples:
=A9+3 would result "formula"
="1+3 would result "formula"
3 would result "constant"
'Blahblah would result "constant".
I have a template with formulas calculating a default value, but still allowing the user to override the cells with direct input.
I want to use conditional formatting to highlight any cells that have been overwritten, but can't find a way for Excel to differentiate between a cell with a formula or an inputted constant.
I realize there is a VBA "isFormula" function, but I don't want to have to use VBA for this.
From a large worksheet I'm trying to find out if a particular value is used in that formula. E.g. formula: (In cell C1)=A1+B1*.75
I want to check if .75 is used in the formula (which is 75%) There are 1000's of record would it be possible to check the entire column C
I'm having an intelligence lapse and I need help with a formula
Simply need to return a "1" if value in Cell X is equal to or greater than -(minus)4% and a "0" if value is less than -(minus)4%.
I am creating a spreadsheet to monitor horse race betting but my formulas aren't coming out right.
The problem is to do with adding winnings to a running balance or minusing each bet's stake money from the running balance if the bet loses.
I have two formulas that are giving me a problem, both are in the P column in the attached spreadsheet. The first one, located in row 2, being slightly different as it is the first data row and so contains the starting balance in the formula.
=IF(OR(J2="W",J2="P",300+S2),IF(J2="L",300-O2,"")).
This produces a blank or error result.
=IF(OR(J3="W",J3="P",P2+S3),IF(J3="L",P2-O3,""))
This produces an error whatever is in the J column
I teach history to four different groups of students that, in my spreasheet, I have labeled "1", "2", "3", and "4." The number of the group to which each student belongs is listed in CK2:CK100
Each quarter, I give all students a test and list the corresponding score next to each student's name. The scores are listed in CM2:CM100.
The name of each student appears in CL2:CL100.
I am looking for the formulas to extract the highest five scores in each group starting at CS2. So CS2 would contain the value of the highest score obtained by a student in group 1, CS3 the second highest score in that group and so on through group 4.
I'm trying to create a formula that will determine the bonus (%) for sales made. Here's the table:
<10000 sales = 0% bonus
>=10000 sales but <=29999 sales = 5% bonus
>=30000 sales but <=to 44999 = 7% bonus
>50000 sales = 10% bonus
Since the sales and bonus figures are subject to change each year I'd like the formula to point to the numbers but that part seems easy if I can get the formula right.
I have my test cases in below format and I would like to calculate # of test cases passed or failed using formula.
-------------------------------------------------
Test case #Step #Result
-------------------------------------------------
Test case 1Step 1pass
Test case 1Step 2pass
Test case 1Step 3fail
Test case 2Step 1pass
Test case 2Step 2pass
Test case 2Step 3pass
Test case 2Step 4pass
Test case 3Step 1fail
Test case 3Step 2fail
I need below result using formula:
# of test cases - Pass = 1
# of test cases - Fail = 2
On Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
=SUMPRODUCT((INDIRECT("'"&B2&"'!$B$3:$B$200")=$A$2)*(INDIRECT("'"&B2&"'!$C$3:$C$200")="Yes")*(INDIRE CT("'"&B2&"'!$E$3:$E$200")))
This gives me the intended result. B2 in this case is January. C2 is February and so forth.
Using Excel 2013,
It trying to see if the Month() of a date is in a Array / Range
I tried =IF(MONTH(E8)={2,6,9,11},"Yes","No") where E8 = 9/30/12
How do I test if a cell has #N/A?
View 4 Replies View Relatedformula I can use to determine age between date of birth (in one cell) and an event date (in another cell)., i.e. birthdate 3/15/2000 with an event date of 3/2/2007.
View 9 Replies View RelatedI need a UDF to test a single cell if it is colored. If it is the result returned should be a 1, if not the result will be blank. This is what I have so far, but I don't know much about VBA.
Function Filled(MyCell As Range)
If MyCell.Interior.ColorIndex > 0 Then
Result = 1
Else: MyCell = ""
End If
End Function
If I have A1:A1000 in a column, and I know that A1000 is the sum of 3 cells within A1:A999 but not sure which, what kind of functions can I write to trace out these 3 cells?
View 8 Replies View RelatedHow would I write an IF Then Statement to test if a cell is blank? (meaning it could have "Div/0!", text, 0, or "n/a".)
View 4 Replies View RelatedI am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .
Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long
[Code].....
I find myself needing this often and hope there is an elegant formula that can make this easier.
Is there a formula that will test if a particular cell is referenced somewhere in another array or vector? Specifically, I find that I have to aggregate long lists into categories to fit budget formats of various lenders and investors. For example, my detail budget has separate rows for Water, Sewer, Garbage, Electrical, and Gas. These expenses have to be aggregated on one funder’s budgets as “Utilities.” Sometimes after going through this I find that my totals don’t add up, i.e. I left an item out of the aggregated budget. I would like to be able to add a column on the detail budget to test if each budget item has been referenced in the aggregated budget.
I want to add an IF statement to my macro that will run only if a cell on the worksheet is not blank (empty). I know how to use the if statements but can't figure out how to test a cell for contents.
View 4 Replies View RelatedI'm testing to see if a cell has nothing in it, and if that is true then it will execute the code. My problem is that even though the cell is blank the field does have a drop down list (list validation set for that field) below is the code i used, but doesn't work.
If Range("b3").Value = " " Then
I want to reference 2 cells to open a msgbox. Currently I use this formula in a cell "=IF(E4="C",IF(A4>30,"OT","")) I am trying to write a macro that will open a msgbox instead. This is what I've tried so far
Private Sub Worksheet_Change(ByVal Target As Range)
If Target(1, 1).Address = "$E$4" Then
If Target(1, 2).Address = "$A$4" Then
If Target(1, 1) = "C" Then
If Target(1, 2) > "30" Then MsgBox("1")
End If
If Target(1, 1).Address = "$E$4" Then
If Target(1, 2).Address = "$A$4" Then
Target(1, 1) = "F" Then
Target(1,2) > "38" Then MsgBox("2")
End If
I have a database of 6 digit numbers in one column(let's say column A). I would like to put in a 6 digit number in a cell (b1)and have another cell (c1) give me a response as to whether that number exists in the database (Exists or Doesn't Exist).
View 2 Replies View RelatedI am trying to determine a formula to know a period time for example i started to test a unit at 10:20 am of 10/02/2011 and i would like to add 52 hours of test and i would like to know when and at what time will finish the test?
View 3 Replies View RelatedI would like to prepare mid-term grades for my history class, and have three categories, which I would like to insert into a spreadsheet to calculate the grades, as follows:
Mid-term 1: 30%
Mid-term 2: 40%
essays: 30%
each of the three grades is a number from 1-100; the final answer will be a number which I can then convert to a letter grade.
I'm just not sure what function to use, in that last column, to get Excel to calculate the final answer/grade.
Let's just assume that Mid-term 1 is in column A; Mid-term 2 is in column B; and the essay grade is in column C. How can I create a function that will allow me to give the above percentages to the respective assignments, when calculating a grade?
Basically I have a column (lets call it column A) whereby I manually fill the cells green once I have received some documents, another column which has a numeric value in it (column B) and I want to create a third column which basically just copies column B but ONLY if column A is filled with a colour (actual colour doesn't matter cause I only use green)
I tried using the IF function but I don't know how to use cell colour as the logical test
I'm trying to write a macro to test whether a cell has any neighbouring cells that match it's value.
I'd like this to be cumulative so that the more matches, the higher the value.
I'd then like the result to be written in another cell to set up a separate grid.
So far I'm getting error messages and I don't know why: