I'm testing to see if a cell has nothing in it, and if that is true then it will execute the code. My problem is that even though the cell is blank the field does have a drop down list (list validation set for that field) below is the code i used, but doesn't work.
I want to add an IF statement to my macro that will run only if a cell on the worksheet is not blank (empty). I know how to use the if statements but can't figure out how to test a cell for contents.
I do not know if I have this written correctly, I would like to have the sub - Retro run whenever some one opens this worksheet - "FORM". The retro is also suppose to test cell H12 to see if it is blank before running the msgbox.
I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.
A1 represent a number of years and B1 represent gains or losses (negative)in dolars.
The way I see the logic is as follows:
If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)
If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.
On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.
I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:
If A1 = 0 then C1 = NGL If B1 = 0 then C1 = NGL If A1 >= 1 and B1 > 0 the C1 = LTG. If A1 >= 1 and B1 < 0 the C1 = LTL. If A1 < 1 and B1 > 0 then C1 = STG If A1 < 1 and B1 < 0 then C1 = STL
How can I write code to test if a cell is blank? My code is using "isempty" but I keep type mismatch error because my cells are filled with formulas that make the cells blank. It only works if the cells are truly empty with no formulas.
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
In worksheet A, there is a column of numbers that can be 0 or not zero.
In worksheet B, there is a column of cells that determines if a corresponding cell in worksheet A is zero or not.
'As an example, for cell 'B!C6 =If( 'A!B52=0,"",'A!B52)
The column in worksheet B is used in a chart.
The chart settings are: Tools | Options | Chart | Active Chart- Plot empty cells as: Not plotted
The chart is not treating "" as EMPTY, and therefore is not presenting correctly.
How would I set the value of cell 'B!C6 to EMPTY (or null, or blank, or whatever Excel calls it) using an IF statement, such that 'B!C6 would evaluate to EMPTY, and be ignored by the chart?
sumif problem but it wont work with a countif or average if.
Column A has various names and Column B has amounts, what I need is to count the number of occurances "John Smith" has an amount in Column B. The previous formula I tried was
=sumif(A:A,"John Smith",B:B) but with either countif or averageif it errors too many arguements.
I wasn't sure if Dcount or an array would be suitable but have not used them before.
Pivot tables I'm sure will be the future with this but haven't got to the foot of that mountain yet.
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors. Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004' Application-defined or object-defined error
Please see attached workbook. I know for a fact this isn't the most effective way to do this, but I just needed something really quick for a small worksheet that my department at work is using. A1:C7 are supposed to represent 3 different types of "methods" In the case of my worksheet, I just typed random stuff.
Basically, I have data validation in B10. Depending on which one I select (1 corresponds with A1:A7, 2 with B1:B7, and 3 with C1:C7), it is supposed to populate that data. I've done this with nested if statements in D10:D16. The issue is that for options 2 and 3, it shows 0's where the blanks should be.
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
I am looking for code that fills empty cells found in columns A-F by copying and pasting the value from the cell of the previous row (of the same column) ignoring columns G onwards. The copying/ pasting then should stop when it encounters its first completely blank row.
I have many sheets in my workbook with many filled or unfilled cells... I want that any cell in my whole workbook should be filled with " " ie a space if it is currently blank (ie don't touch the cells which have some data) and as there are many cells in a sheet .. I don't want to fill them with spaces as the file size will increase... I just want to do this for cells A-1 to AB-200.
What is the way of doing this with a formula or programming ie without macros... (or is macro the only way?) What if I just want to do this to a sheet and not to the whole workbook.
I'm looking for a function that will display the average of a row of cells, while at the same time not displaying any error messages. It's easy to average cells without blank values, but to combine that with no errors is difficult for me. I saw many ways to do the average, one of which is:
= SUM(A1:E1)/COUNTIF(A1:E1,">0")
That function doesn't work for a row of blank cells (i.e., hidden rows), though. The result is an error message.
I also read about a way to ignore an error in a computation:
=IF(ISERROR(F1),"",F1)
The problem is when I combine those functions I get a blank cell no matter which function I put first, and without regards to cell values or not. The reason I want this to be error-free is that I have to average the "average column" at the bottom of the table, too (i.e., F100).
When choosing ascending or decending, is it possible to always keep rows with the designated blank cells at the bottom? Trying to prevent the blank cells from popping on the top when i filter by a certain field.
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..