I am trying to use worksheetfunction.vlookup. with a date as the lookup item and key field. funcion works when I test using integers, but fails when I use dates.
Sub vlok()
c = DateSerial(2007, 12, 2)
c = Application.WorksheetFunction.VLookup("c", Range("tab1"), 2, False)
End Sub
I have a table with three columns. I'm building a calendar on a separate worksheet and am looking up the "value" based on a calendar date. So if a date falls within any of the ranges, I'd like to return the value in column C. For example, if the date is 02/07/12, I'd like for the result to be value 1, or if the date is 04/17/12, then I would like the result to be value 3. I've used a nested vlookup, but all that give me is the value when either the start or end dates match, but I can't get a value when the date falls within the range. If the dates were consecutive, I would simply use vlookup/TRUE, but the dates are not consecutive.
ABC102/06/1202/09/12value 1203/12/1203/15/12value 2304/16/1204/19/12value 3405/21/1205/24/12value 4506/25/1206/28/12value 5606/25/1206/28/12value 6
I have two sheets on a workbook.
SheetA is the mastersheet containing the reference numbers
SheetB contains some of the references numbers and a date next to each reference number.
This is my formula: =VLOOKUP(A2,'23March'!A:K,10,FALSE) to get the date reflected in the Master sheet and this is what I get: 0/01/00
Both columns are date format. The reference number column is formatted as number ( I tried general format too and it made no difference)
I have a list that I want to use in a VLookup. Column A has a type and Column B has a last used date. The last used date will not be arranged chronologically. I want a VLookup to show me the most recent date that a type was used. VLookup might not be the best solution, but I don't know what is!
Example below:
Pizza
1/5/2010 Pizza
1/10/2010 Burger
2/15/2010 Salad
1/15/2010 Burger
1/15/2010 Soup
1/10/2010 Soup
2/15/2010 Pizza
1/28/2010 Salad
1/29/2010 Burger
1/30/2010 Burger
1/30/2010 Salad
1/15/2010 Burger
1/28/2010
Most recent date Pizza
Burger
Salad
Soup
It's a quick formula question that I have trouble solving..
See attached : LookupSample.xlsx
I'm having trouble getting my vlookup formula to work in vba. Basically, I have a range of dates in column A and want to the vlookup to fill these in until there are no dates available. The reason I want to do this in VBA opposed to on the spreadsheet, is that I have large subset of time series data which needs to be frequently updated and wish for the data in column C to be updated everytime the macro is run.
My code is below.
I am hoping to do, is change a table's information based on a date range that is specified by the user. I have attached an example workbook below. In the example, on the Data sheet, there is the raw data information, showing user name, the date in question, and finally a number that refers to employee productivity on said date.
What I am hoping to do is to incorporate a vlookup function in order to change the data recovered on the Chart sheet by having the user select a date range. So that if you wanted to view the statistics for just Dec 15, 2008, it would only poll the data from that date, and if you wanted to view the statistics for any dates between Jan 1, 2009 and say Jan 30, 2009, it would do the same.
I am setting up a VLookup system in which hundreds of excel worksheets are refering back to one master price list. How can I keep everything up to date if the master list is changed? My ideas: Is there a way to sync multiple worksheets (at the end of the workday, maybe)? Is there a way to keep the master sheet open in the backround so that each new worksheet I open gets the updated information? Or perhaps there is an easier way?
I don't know code or anything fancy like that so a simple solution (even if it's not the best method) will do for now. *Another note: these worksheets will be saved on a network available to up to 3 computers at a time.
I want to run a vlookup (against cell D1 for this example), from a selection of date cells in column A (cell A1 in this example), where the date can be plus or minus a set number of days from the value in the cell (2 days either way in this example).
When I try the following it does not work:
if((A1-2)>A1>(A1+2)=D1,vlookup(D1,D:E,2,0))
Just to clarify, if D1=05/11/2012, I want the vlookup to return if cell A1 is equal to Nov 3rd, 4th, 5th, 6th, or 7th.
PS: =if(or(a1-2=d1,a1-1=d1,a1=d1,a1+1=d1,a1+2=d1),vlookup etc etc) returns the correct result, but if the date range I search on changes I don't want to rewrite the formula in this format.
I'm currently using an IFERROR, VLOOKUP formula to display an availability date for a product.
Atm, it reads some like this
My original formula is:
=IF(ISBLANK(VLOOKUP($E39,'Players Scores'!$A$4:$AV$700,'Players Scores'!AA$3+6,FALSE)) = FALSE,VLOOKUP($E39,'Players Scores'!$A$4:$AV$700,'Players Scores'!AA$3+6,$E39),"")
I am using the above formula but would like it to get the value when the date has passed (when date has been inputed in another cell)
I have added an attachment, The formula begins at J44 to AY44 but when date has entered in the red (D44:D67)section I would like to retreive values for blue section(Q44 and onwards) and not the yellow section(J44 to P44)
This is so when players make a transfer it doesnt include the weeks before that date!!
i have attached an example to illustrate the data source and result expected.
View 3 Replies View RelatedI am having trouble doing a VLOOKUP, whereby I have a column of staff that are frequently detached from the workplace (See extract sample). One member of staff could be away 4 times in a year and I need to place the most relevant detached date (which would be 2 months ago and 4 months from today) into another table. This other table would then show all members of staff in alphabetical order with just one detached and return date. If the date falls out of the above parameters (6 month window), nothing would be displayed.
I have 1 file with 2 worksheets, MR and MR (ytd). I want to write 1 procedure for a report to lookup the container no at MR from MR (ytd), then return the date.
Now I just use the formula vlookup to do this function.
=IF(ISERROR(VLOOKUP($B5,'MR (ytd)'!$B$5:$O$805,14,0)),"0",VLOOKUP($B5,'MR (ytd)'!$B$5:$O$805,14,0)+$B$2-'MR (ytd)'!$B$2)
I have write up some code for it. But find it is cannot lookup.
Code:
Sub mrdays()
Dim mrrecords As String
Dim i As Integer
Dim to_date As Date
Dim lsrpdate As Date
With Sheets("MR")
[Code] .........
I have a table, which is a price list, with different prices based on different dates. For instance, the dates may be 1/1/04, 6/1/04, 7/1/04, 10/30/04, etc. I have some dates in another table, for instance, 2/2/04, 7/5/04, 12/20/04, etc. I want to lookup the date closest to, but not greater than, the last previous date posted. So, for the first date of 2/2/04, you would use the column with date 1/1/04 from the first paragraph. For a date of 7/5/04, you would use the column with date of 7/1/04. I think this is a simple VLOOKUP function, but not sure how to do a date compare. Also, the lookup has to do two things. First, it has to find the part number in the table, and then match it do the respective most recent date.
Table setup:
Part Number ---- Date
5555555555 ---- 7/5/04
Lookup table:
Part Number ---- 1/1/04 ---- 6/1/04 ---- 7/1/04
5555555555 ---- $65.32 ---- $68.52 ---- $71.52
I want to grab the price with the respective date from the first table. In this case, it would grab the price of $71.52 from the lookup table.
I haven't had issues with vlookup on other worksheets, but this one is giving me trouble. I have attached the excel file for your consideration.
The lookup value is in cell U2, formatted as a date
The table array is V2:Z19
The column index number is 2 for C3
False lookup
I've tried the formula with and without the text function for the date and I've also tried different formats for the dates in columns V to Z because I know the format of the cells have to match for vlookup. It is very frustrating because this should be simple, but it is messing up.
Say in L4 on form test i want to look for the value of A4 in Drill data range a2 to z1000 and retun a concatenated string of something like "sav 407 : 08-may to 11-may"
View 3 Replies View RelatedI have a statement in a cell in which there is a date field.
Is it possible to apply Vlookup on the statement and change the Date value keeping the statement same ???????
Im working on a document for work, its sort of a learning hobby tbh, something i want to learn. Im trying to do things myself from the books etc, vids from the net. This one i cant find the answer to so before i go ahead i would like to see if it can be done
Basically, we have a few documents that change every day. we get the raw data, and delete coloumns, change the size to autofit width etc...
(im creating a main macro to do that now)
But with that data i need to..
open a new book (but the book name is never the same... book1, book2 as you know)
paste the data
save it
.... the file name! needs to be something like this "Department 20130401" which i saved on 01/04/2013
if i did the document on 10th september.. it would be "Department 20131010"
I have Coloumn A with the dates 01/01/2013 etc
and Colounm B with Department 20130101 etc
Cell ("I1") has =Today() in it
could a macro change the filename from a vlookup result?
I have a spreadsheet that records the date, specific sporting activities and cash award for participation in a round robin sporting event that was held over 52 weekends. I'm trying to lookup the cash award value of each event the person participated in by using a date range within the vlookup formula.
Each participant has their own spreadsheet which they are able to access via server, and each spreadsheet looks a bit like this:
-Column A contains the date of an event in which the person participated
-Column B contains a category number related to the type of event eg marathon = 12, hurdles = 15, relay = 18 etc. This info is manual input
-Column C contains the amount the person will be awarded by simply participating in the event. This is a lookup value and varies depending on the date the person participated, so I'm trying to incorporate date ranges and 'if' formulas into the vlookup
I'm from Australia so my dates might be backwards...
Spreadsheet:
A B C
1 02/01/13 15 (supposed to be $10)
The formula should read a bit like this:
if (date at A1 is within date range 1st Jan 2013 and 31st March 2013, lookup B1 in table 1 column 2), if (date at A1 is within 1st Apr 2013 and 30th Jun 2013, lookup B1 in table 2 column 2)...etc for each quarter
I don't know if the following is right
=IF(AND(A1>='01/01/2013'+0,A1='04/01/2013'+0,A1
I have date data in Column O, which appears like. At any given point in time, i would have such date data for 5 to 10 days, and I want to just assign 1 to first date, and next date to 2 and so on.
What formula (can i use RANK formula, and how) I can use to get the desired result. SEcond part of the query may require macro, so will ask later.
Basic Data Desired Output
Column O Column P
20-Jan-13 1
20-Jan-13 1
20-Jan-13 1
20-Jan-13 1
21-Jan-13 2
21-Jan-13 2
21-Jan-13 2
21-Jan-13 2
21-Jan-13 2
22-Jan-13 3
22-Jan-13 3
22-Jan-13 3
22-Jan-13 3
26-Jan-13 4
26-Jan-13 4
26-Jan-13 4
26-Jan-13 4
I have two columns - Employee and Status of Deal. Now, I need to get the total count of New and Active-to-date but on a per employee basis. Am I making any sense? To clearly put it, I need a formula that will answer the questions below:
How many New and Active-to-date deals does Michael et al have? I tried to use Countif but that gave me the total number of deals, not on a per status basis. Will VLookUp work or a combination of both? If so, how? I'm using Excel 2003.
I have a large table in the final tab of my excel book. This table contains data such as Company name, contact details, etc but also a date which I must contact them on (this is nothing sinister, just a curtsy call following a job ).
The problem I am having is that I am running a vlookup on the first tab on a cell referring to todays date. This only brings shows one record which is the first occurrence of this date. This isn't very useful to me
The problems I need solving are:
I would like to be able to vlookup a range of dates (i.e. 7 days before or after todays date) - how do it do this?
I would also like to be able to return multiple results (i.e. if there is more than one company within that date range I would like them to show).
The purpose of the attached spreadsheet is to record whether or not my company has stock of each item, on every day. It currently works by doing a VLOOKUP in each cell if the date matches todays date which is generated by the formula on the TOTALS tab, cell I2. The current days stock levels are refreshed by a database query on the DATA tab and then totaled up on the TOTALS tab. The VLOOKUP formula returns the stock level and if we are out of stock then we are manually formatting the relevant cell on the REPORT tab red.
It has been suggested to me that there might be a way to do this via conditional formatting although I cannot work out how as once the current day changes to tomorrow then the formula in the previous cell no longer returns a value and the conditional formatting would return teh cell colour to white. Is it possible to automate this process using VBA so that whenever the sheet is opened (daily) then it will copy and paste special the relevant stock level for that day against the correct product?
I am attempting to find a way to search through a database I created based upon every day of the year. My goal is to have a user input a beginning date and end date for a trip, then my functions will return the range specified with each day and it's individual temperature average (in my database).
I also need generating the dates between the start and end dates that are entered by the user. I was considering combining Days360 with an Hlookup that searches through a massive sheet with all the dates for the upcoming year and then going down 1 in the column for the difference in the dates in each column.
Vlookup Help.xlsx
I have a report I am attempting to populate with data from a pivot table in another worksheet. Column A holds all the reference numbers (primary key), column B contains various start dates, and I want column C to contain all the payments made since the start date for each reference number.
The source data is a pivot table with Row = Reference number, column = transaction date, values = transaction amounts. This is an extremely large table, as I'm processing data from almost 1,200 cases, which each have around 20 payments spread over the last year, on completely random days. What I would like to do is build a formula in my report which looks up the records for the reference number from column A, and then adds up all the payments which have been made after the date in column B (and ignore any payments in the table which are before that date).
And to make things more complicated:
if an error is generated, it needs to return as 0, not #N/AThe report has the dates in UK format dd/mm/yyyy, but the pivot table has the dates in SQL format: yyyy-mm-ddThe pivot table is connected to a SQL database via ODBC and has to refresh every time it is opened.
=IF(ISERROR(VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE)),0,VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE))
I created an UserForm that looks for Student Name his/her Conferenece Date through a VLookup.
The following is my code:
Private Sub cmdFind_Click()
With frmConference
.txtTranslator.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 6, 0)
.txtDate.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 5, 0)
.txtTime.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 4, 0)
End With
End Sub
The txtTranslator and txtTime works correctly, however txtDate give me a number '40850' not a Date?
How can I change this number for the actual Date?
I have designed a spreadsheet and i want a seperate worksheet (sheet3 for arguments sake) to retrieve customer data from worksheet 2 - The data I required is the customer data currently contained on columns A - H and there are around 50 rows. (A2 - I51). I want the seperate sheet to identify entries that have today's date in column I and then list them in Worksheet 3.
Im having difficulties with the syntax for retrieving the data from a seperate worksheet. There may be several entries for the same date and I want to the seperate sheet to report all customer data in worksheet 3? Also, if the date falls on a weekend I would like to retrieve any data for the weekend on the Monday so all cases can be reviewed.
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View Related