I have written some code intended to automatically clear a cell when data appears in it from an external source. In one spreadsheet, it seems to work exactly as expected, ie when the cell is polulated, it immediately clears the contents. In another spreadsheet, with exactly the same code, it will not automatically clear. If I put it in debug mode and step through it line by line, then it does do as expected but otherwise it won't.
View 9 RepliesPrivate Sub txttodaysdate_change()
txttodaysdate = Format(Now, "mmm/d/yy")
End Sub
when i use this code i wnat the date to automatically appear in the text box but it doesn't I have type something into the textbox then the current date appears,.
I am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?
View 2 Replies View RelatedMy manager wants me to create a userform that will populate values from access database . I have done that and now he wants it to run always for the whole day everyday and the values should get updated automatically in the userform. There should be a timer event set that will run the userform automatically after few seconds.
View 3 Replies View RelatedI have a macro created that at the mo is assigned to a button. But I would like the macro to run as soon as the spreadsheet is opened.
View 9 Replies View RelatedIs it possible to run the following macro automatically using VBA when cells B2 and C2 equals "Yes"? I don't want any manual intervention for this to happen.
Sub clearcells()
'
' clearcells Macro
' Macro recorded 14/10/2009
'
Selection.ClearContents
Range("F3").Select
Selection.ClearContents
Range("G3").Select
Selection.ClearContents
Range("H3").Select
Selection.ClearContents
Range("H4").Select
End Sub
I am using a macro that automatically updates data obtained through a DDE link at 5 second intervals. My code is based off of the article "Automatically Run Macros at a Set Time or Date" found on the Ozgrid FAQs found here: http://www.ozgrid.com/Excel/run-macro-on-time.htm
However, I have this macro execute when I activate a Form Button, not when the workbook opens. So far, this macro works perfectly, and I have no problems. Although, I'd also like to include a Form button to STOP the macro from automatically running if the user chose to do so. How exactly would I go about making this STOP button?
I am using Excel 2011 for Mac.
I am creating a workbook with multiple worksheets, one overview sheet and then one sheet for each month of the year.
In the monthly sheets I have a Category column for which I have created a drop-down menu of expense categories. Then I have an Expense Amount column where I enter the amount spent.
The Category column will not necessarily remain sorted by category because I will be entering the expenses as they come up throughout the month so the categories will be all mixed up, unless I manually sort them.
What I want to do is somehow automatically calculate a running subtotal by Category (that will update with each new entry) and simultaneously automatically transfer the running subtotal for each Category to a specific cell on the overview sheet.
This is bizarre - over the last year or so, on two machines (one Win98SE/Off2K, the other Win2KSP4/Off2K3), very occasionally a change I've made to Excel/VBA code has been ignored (eg to add a MSGBOX call) - even after I've restarted Excel. The workaround is to add a blank line and remove it again in the actual code module, but its both annoying and intriguing,
View 4 Replies View RelatedMy code runs so slow! The sheet only has 233 rows and 6 of them are not in the loop.
View 6 Replies View RelatedI need a message box with information before the code run. Yes - code run, No - exit code.
View 9 Replies View RelatedI have used a code to find the character "-" and replace it with nothing ("") from several named worksheets across my workbook, which OzGrid helped me with before, and it worked fine. Now I've added the code into my module (at the bottom) it doesn't work. The rest of the code works fine, and it doesn't come up with any errors when I run it, but it just seems to ignore the 'find and replace' part of it.
Sub split1()
Dim fromSheet As Object
Set fromSheet = Worksheets(1)
Dim fromRow As Integer
Dim toRow As Integer
Dim lastRow As Integer
Dim errCount As Integer
Dim thisSectionName As String
Dim i As Integer ' loop counter
Dim rng As Range 'found range
Dim emptyCellAbove As Range
Dim rng1 As Range
Dim arng1 As String 'Address of 1st hit rng1
Dim ws(7) As String
Dim ii As Integer '2ND LOOP COUNTER
Dim iii As Integer '3rd Loop Counter
I'm trying to create a spreadsheet that uses one cell to enter a dollar amount and stores the amount entered in another cell. But I would like the input cell be zero after each entry, and the cell storing the amounts to keep a running total.
View 4 Replies View RelatedAttached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.
Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.
If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...
My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.
What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.
Test.xlsm
I have the following code, I have it running to just work on Sheet 2 but I would like it to be able to run on mulitple sheets, not all but a range like from Sheet2:Sheet30.
[Code]........
I have placed the code I am using below. It takes values from a hidden sheet (PACTAct) and places them on a visible sheet (Email). The code moves between the two.
It works at the minute by unhiding the PACTAct sheet then at the end re-hiding it. However I don't want the user to see this sheet whilst the vba is running. Is there a way I can simply refer to the worksheet without unhiding it?
I have a macro, that basically runs a sub routine to count down say for example 1 min, at which time the workbook closes. However if the user opens one of the forms I would like to turn off the background timer macro. How can I do this with code? Is there code that does the opposite of 'application.run'?
View 1 Replies View RelatedLet's say I have 6 Worksheets in my Workbook with the following names:
Sheeta1
Sheeta2
Sheeta3
Sheetb1
Sheetb2
Sheetb3
And I have three Subs that I want to run, one Sub for two specific Worksheets.
How could I code my Subs so that the first Sub runs on Sheeta1 and Sheetb1, the second Sub runs on Sheeta2 and Sheetb2, and the last Sub runs on Sheeta3 and Sheetb3?
As you can see, the 1, 2 and 3 in the Worksheet names are what links the Subs to the Worksheet.
I want to place a message in cell
Sub OutOfStockDate()
templateSheet.Range("B15").value = dataSheet.Range("G5").value
If dataSheet.Range("G5").value = "" Then
templateSheet.Range("B15").value = "There is no Out of Stock Date"
End If
End Sub
However when I run this code I get the infamous 1004 error.
I know how to enable/disable events using VBA code, however is there an option within excel to turn it on/off? My problem is this...
At the beginning of my code I disable events and at the end I enable it again (I need to do this to avoid being caught in a loop). However something is going wrong somewhere in my code and the code stops halfway through. I'm trying to test sections of the code, but I often inadvertently stop the code without enabling the events again. Therefore I can't get my VBA to execute again unless I close excel down and restart. This is a pain as I have to find my place in the code again!
I am writing a grading program, which during the course of functioning must run other code that has errors. I have used On Error Resume Next code to allow the program to keep functioning when it has run into errors so far. However, when a subroutine is called that calls another subroutine with incorrect parameters, I get a VBA error message pop up. Inserting On Error Resume Next directly into the other code doesn't stop this problem. I either need a way to have it skip over any call to a subroutine with improper parameters, or to check if a project can compile before grading it.
View 3 Replies View RelatedI have just written a macro to validate/clean up some data which I get on a monthly basis. Some of the columns come from a pdf file and thus excel recognises these as strings. I have written some code that would convert this string to an integer which runs fine when I step through the code. However when I run the macro from a button the number value goes from e.g. 5000 to 0.
The code is below:
VB:
Sub Condition2()
For k = 8 To LastRow
Worksheets("Bordx Format").Cells(k, i - 1).Value = CDec(Cells(k, i - 1).Value)
Next k
End Sub
I usually just use macros to clean up Data from non-excel sources. So I wrote a macro to do this, but the process requires a date to be added, so attempted to do this via an input box. The input box works, but the code doesn't, clicking the button to which the macro is bound spits out an error 91 (object out of bounds?) when it hits the search function right after the inputbox code. Both bits work as intended separately, so I guess it's just some moronic formatting error on my behalf.
[Code] ......
Two workbook, A & B. Code in B copies some data over to a sheet in workbook A.
It does this not problems if A has remained open, but if it has just been opened, I get a "subscript out of range" error at the "With Workbooks" line.
The bit in red is what I have recently added to allow workbook A to be closed unless needed. Since adding this, the debug error has emerged, even though there was no problem when workbook A remained permanently open.
The code opens a varying workbook with the same format as the source workbook and copies specific columns into the source workbook.
It is currently taking about 20seconds to run.
The worksheets are protected and have merged cells hence the call TestMe line.
I need a MsgBox that will prompt for a Yes or No response. If you answer Yes run the code below if you answer no just stop and leave me in the current sheet.
View 10 Replies View RelatedSub SplitOut()
Dim DataSH As Worksheet, OutSH As Worksheet
Set DataSH = Sheets("Input")
DataSH.Activate
lastrow = Cells(Rows.Count, "D").End(xlUp).Row
For Each ce In Range("D2:D" & lastrow)
Application.StatusBar = "Actioning " & ce.Row & " of " & lastrow.............
I am working on this spreadsheet that has a lot of information that will only get bigger as time goes on. I would like to organize the contents of one column into separate spreadsheets. So if I have "stacking" in one cell of that column, the whole row associated with that cell will go to a new spreadsheet labeled "stacking".
I have attached the sheet. I would like column D (Type_Code) to be organized by the words in that column. So I would have 5 or so worksheets labeled stacking, cartoner, wheel, inspection, etc. The data here is input by a machine.
Now..when I run any of my macros, I get the following message.. "Code Execution has been interrupted".
I'm not sure why I'm getting this message but it happens everytime I run ANY macro. Note that if I hit "Continue" every time it gives me the option, I am able to successfully run the macro, but obviously, I shouldn't have to do this.
I have the following code to add dash mark to TextBox1 value depending on some condtions (mentioned in the code), the code works perfectly, but when we use Backspace Key to clear some charactors it is conflicting with the code running when changing Textbox1 value.
View 11 Replies View RelatedI have a workbook which I regularly upload that cannot have macros within it; however, to update and process the data, I must utilize VBA Code.
I tried to work around this by storing my macros in a module in another workbook. My process is to have the VBA Code Module from the other workbook open and have the active workbook be the one I want to change, then I run the VBA Code from the other workbook.
This used to work. However, I am recently getting problems with the Code not running correctly. Sometimes it only runs the code if the affected cells are not hidden; other times it will not run the code at all!