I am writing a grading program, which during the course of functioning must run other code that has errors. I have used On Error Resume Next code to allow the program to keep functioning when it has run into errors so far. However, when a subroutine is called that calls another subroutine with incorrect parameters, I get a VBA error message pop up. Inserting On Error Resume Next directly into the other code doesn't stop this problem. I either need a way to have it skip over any call to a subroutine with improper parameters, or to check if a project can compile before grading it.
I have a macro, that basically runs a sub routine to count down say for example 1 min, at which time the workbook closes. However if the user opens one of the forms I would like to turn off the background timer macro. How can I do this with code? Is there code that does the opposite of 'application.run'?
I have just written a macro to validate/clean up some data which I get on a monthly basis. Some of the columns come from a pdf file and thus excel recognises these as strings. I have written some code that would convert this string to an integer which runs fine when I step through the code. However when I run the macro from a button the number value goes from e.g. 5000 to 0.
The code is below:
VB: Sub Condition2() For k = 8 To LastRow Worksheets("Bordx Format").Cells(k, i - 1).Value = CDec(Cells(k, i - 1).Value) Next k End Sub
Now..when I run any of my macros, I get the following message.. "Code Execution has been interrupted".
I'm not sure why I'm getting this message but it happens everytime I run ANY macro. Note that if I hit "Continue" every time it gives me the option, I am able to successfully run the macro, but obviously, I shouldn't have to do this.
I am attempting to run a MS Ecel macro that is stored on a MS Excel shared file in a MS Ecel target file (locally stored on my C drive) from a VBA module in Ms Access. That is, from a code i want to open the .xls file that houses the macro, and then open the .xls file that i want to run the file in, and then run the macro.
Here is my situation: the file that houses the macro has the workbook hidden and causes in error.
if i unhide the workbook i get a Run-Time Error 91...object variable or With block variable not set.
if i hide the workbook the vba coding can't find the macro...run time error 1004
once again, i currently have an excel file that houses macro whose workbook is hidden.
I want to be able to run a certain chunk of code in the macro if a certain condition is true, or if that condition is not true then I want to bypass that chunk of code. It doesn't matter if this is accomplished with an if... then... else statement, or some other way.
I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
Is it possible to display both the current code line number and the total line count of a macro while it's running?
I was thinking it would be handy for a progress indicator if the ProgressBar max value could be set to the LineCount total of the procedure and each line of code would increment the progressbar as the macro ran.
I am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?
I'd like to build two macros that are slightly different but are both along the same lines.. The first one will take only certain columns of information from the "Master" sheet and dump them into the "Public" sheet. (I want only certain information to be seen by others). I.E. say I only want columns A, H, K, L from the master sheet to go in A, B, C, D in the Public sheet. I hope thats enough detail. The other macro I want to build will take the A, B, C, D information from the Public worksheet and dump it all into another workbook called "Client Lists". The link to these two documents would be over a network so there shouldn't be any issue there... This way, all the people I work with can have this document and have up-to-date information on clients etc.ed...
Currently where I work we print out registers to keep track of student attendances. This is done by merging an excel document that contains all the details of the names, days, dates , times, student groups and rooms of each lesson (each row contains the details for one lesson) with a word document containing the appropriate list of students in each specific group along with blank mail merge fields that relate to the excel document.
There are often 100 lessons a week meaning it takes an age to merge all the documents to create the registers.
Instead of this method I'd like the tutor to print off their own register by opening the excel document and clicking a button at the end of the appropriate row that contains the details for the lesson they are teaching. This would then take the details from that row and generate the appropriate register on another worksheet. Importantly it would have to list the correct group of students for each lesson - the names of these groups would be listed on other sheets.
Im guessing macros would be the right way to do this, but I have no real knowledge of them so alternatives would be helpful. Can anyone point me in the right direction? I've included a sample of how it would look with just one lesson in the excel doc.
Basically I want the macro to look through a column of values and if any cell in that column has the value 'LOCK' the macro would hardcode 'n' into the adjacent cell. Additionally, because the column in which the LOCK cells would appear is part of a vlookup, it returns #N/A which I would like my macro to ignore and then continue to evaluate the next cell all the way to the end of the column.
This is bizarre - over the last year or so, on two machines (one Win98SE/Off2K, the other Win2KSP4/Off2K3), very occasionally a change I've made to Excel/VBA code has been ignored (eg to add a MSGBOX call) - even after I've restarted Excel. The workaround is to add a blank line and remove it again in the actual code module, but its both annoying and intriguing,
I am running into a Procedure too large error when running my macro. My macro is designed to replace a cell value with another cell value in a list. When the cell value is replaced a vlookup brings in new data to my workboook. Then the macro refreshes all the pivot tables and saves the workbork. I want my macro to repeat the above 60 times, so I have copied the code 60 times and changed the ActiveCell.FormulaR1C1 to point to the next value in my list. (Is there another way to select the next value from the list without changing the Row and Column number?) This is where my macro fails.
Below is my code.
VB: Sheets("Data").Select Range("B2").Select [COLOR=#FF0000] ActiveCell.FormulaR1C1 = "=RC[25]" ' AGC GRP_ID[/COLOR] Sheets("Ship pivot and cum triangle").Select ActiveSheet.PivotTables("PivotTable4").RefreshTable Application.DisplayAlerts = False
I created three macros to work with reporting for my company.
One sorts a field, another deletes unwanted columns, and the third double checks columns for answers--I work for a telecom polling firm.
It was working last week on my computer, and it still works on another computer at the office. However, I keep getting an error message when I try to run it.
The message is "Compile Error: Expected Function or Variable". The code is below, and bolded where it breaks down.
--selection.Autofilter
[Code] .......
What could be the rationale for the sudden breakdown? I was testing it on a file that I have tested with before without issue. I also tried a second file, and even restarted my computer. I am currently trying to write a fourth macro for counting responses and giving percentages, so while I don't need to have the perfectly cleaned data to do so it would be nice to have.
i'm trying to run a macro I recorded then amended to define a final row, but when I step in to the macro it says Compile Error - variable not defined. Please can someone help, surely I am defining it so I don't know why it doesn't work? Is there anything wrong with my FinalRow line in this macro?
Sub Macro1() ' ' Macro1 Macro ' Macro recorded 21/06/2009 by Richard Shaffer ' ' Sheets("Core Finance").Select FinalRow = Cells(65536, 1).End(xlUp).Row Range("A3:O" & FinalRow).Copy Sheets("Sheet1").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _ SkipBlanks:=False, Transpose:=False Range("A1").Select End Sub
I'm done creating a macro. how can i do to compile it. I know there is an option in the tool bar, but i don't get any .exe file after clicking on that option. Do i need any compilator library or something?
I have written some code intended to automatically clear a cell when data appears in it from an external source. In one spreadsheet, it seems to work exactly as expected, ie when the cell is polulated, it immediately clears the contents. In another spreadsheet, with exactly the same code, it will not automatically clear. If I put it in debug mode and step through it line by line, then it does do as expected but otherwise it won't.
I have used a code to find the character "-" and replace it with nothing ("") from several named worksheets across my workbook, which OzGrid helped me with before, and it worked fine. Now I've added the code into my module (at the bottom) it doesn't work. The rest of the code works fine, and it doesn't come up with any errors when I run it, but it just seems to ignore the 'find and replace' part of it.
Sub split1()
Dim fromSheet As Object Set fromSheet = Worksheets(1) Dim fromRow As Integer Dim toRow As Integer Dim lastRow As Integer Dim errCount As Integer Dim thisSectionName As String Dim i As Integer ' loop counter Dim rng As Range 'found range Dim emptyCellAbove As Range Dim rng1 As Range Dim arng1 As String 'Address of 1st hit rng1 Dim ws(7) As String Dim ii As Integer '2ND LOOP COUNTER Dim iii As Integer '3rd Loop Counter
I'm trying to use MATCH to identify the Column number that contains "DL_Error", then I'll use this Column # to select a cell (found Column # & "34"), but I get the error shown in the title of this post.
Here's my current Sub Macro15() ' Macro recorded 6/18/2009 by me Range(Match("DL_ERROR", "A31:CW31", 0) & "34").Select End Sub
I'm trying to create a spreadsheet that uses one cell to enter a dollar amount and stores the amount entered in another cell. But I would like the input cell be zero after each entry, and the cell storing the amounts to keep a running total.
Attached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.
Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.
If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...
My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.
What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.
I have the following code, I have it running to just work on Sheet 2 but I would like it to be able to run on mulitple sheets, not all but a range like from Sheet2:Sheet30.
I have placed the code I am using below. It takes values from a hidden sheet (PACTAct) and places them on a visible sheet (Email). The code moves between the two.
It works at the minute by unhiding the PACTAct sheet then at the end re-hiding it. However I don't want the user to see this sheet whilst the vba is running. Is there a way I can simply refer to the worksheet without unhiding it?
