I have a macro, that basically runs a sub routine to count down say for example 1 min, at which time the workbook closes. However if the user opens one of the forms I would like to turn off the background timer macro. How can I do this with code? Is there code that does the opposite of 'application.run'?
View 1 RepliesI have a "Private Sub Worksheet_SelectionChange(ByVal Target As Range)" in a worksheetsheet code.
I would like to turn this procedure off while I run another routine and then turn it back on after the routine has run.
I am writing a grading program, which during the course of functioning must run other code that has errors. I have used On Error Resume Next code to allow the program to keep functioning when it has run into errors so far. However, when a subroutine is called that calls another subroutine with incorrect parameters, I get a VBA error message pop up. Inserting On Error Resume Next directly into the other code doesn't stop this problem. I either need a way to have it skip over any call to a subroutine with improper parameters, or to check if a project can compile before grading it.
View 3 Replies View RelatedI have just written a macro to validate/clean up some data which I get on a monthly basis. Some of the columns come from a pdf file and thus excel recognises these as strings. I have written some code that would convert this string to an integer which runs fine when I step through the code. However when I run the macro from a button the number value goes from e.g. 5000 to 0.
The code is below:
VB:
Sub Condition2()
For k = 8 To LastRow
Worksheets("Bordx Format").Cells(k, i - 1).Value = CDec(Cells(k, i - 1).Value)
Next k
End Sub
Now..when I run any of my macros, I get the following message.. "Code Execution has been interrupted".
I'm not sure why I'm getting this message but it happens everytime I run ANY macro. Note that if I hit "Continue" every time it gives me the option, I am able to successfully run the macro, but obviously, I shouldn't have to do this.
I am attempting to run a MS Ecel macro that is stored on a MS Excel shared file in a MS Ecel target file (locally stored on my C drive) from a VBA module in Ms Access. That is, from a code i want to open the .xls file that houses the macro, and then open the .xls file that i want to run the file in, and then run the macro.
Here is my situation: the file that houses the macro has the workbook hidden and causes in error.
if i unhide the workbook i get a Run-Time Error 91...object variable or With block variable not set.
if i hide the workbook the vba coding can't find the macro...run time error 1004
once again, i currently have an excel file that houses macro whose workbook is hidden.
does anyone know how this can be accomplished?
here is the ....
I want to be able to run a certain chunk of code in the macro if a certain condition is true, or if that condition is not true then I want to bypass that chunk of code. It doesn't matter if this is accomplished with an if... then... else statement, or some other way.
View 6 Replies View RelatedI've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
Is it possible to display both the current code line number and the total line count of a macro while it's running?
I was thinking it would be handy for a progress indicator if the ProgressBar max value could be set to the LineCount total of the procedure and each line of code would increment the progressbar as the macro ran.
I have a series of sheets in my workbook , each sheet has a piece of VBA code that is identical. On my master sheet I want the user to be able to turn on/off this piece of code with the toggle of a button.
My code is a :Worksheet change event
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("B9,D9,")) Is Nothing Then Exit Sub
If Target.Offset(-1, 1) = "" Then.......
.....
End If
End Sub
Need code to disable and enable "Protect and Share Workbook"?
View 9 Replies View RelatedIs there a way to turn off those annoying error message boxes that pop-up when a line of code is incorrect? I pretty frequently go to another area of code to grab some previous code to copy and paste, and the error message box pops-up, so I have to hit OK to close it. It would be nice if it still highlighted the problem red, but I'd even give that up for those boxes to go away.
View 5 Replies View Relatedhow i can turn on view vba code in Apple MAC office 2008.
View 3 Replies View RelatedI am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?
View 2 Replies View RelatedI have a workbook which is set up to take an average heart rate of a participant from a series of data points. I have set the spreadsheet up before I have collected some of the data. (so I can review the project at the 3 months period and its an ongoing project).
The problem is that if there is no data in a participants column then excel correctly gives you readout of “#DIV//0!”. On my results page this #DIV//0!” makes it hard to read the spreadsheet. Is it possible to get excel to turn #DIV//0!” to “0” or even turn it to a blank cell?
I have a macro which reads data from a large number (up to 500) of books in a folder. This extracted information is subject to some fairly heavy analysis which means that the macro runs very slowly as the sheet is constantly calculating.
I would like to add some code - maybe after 'screen updating = false' - that would turn off auto calculation while the macro runs and then restore it once the macro is finished.
is it possible to have a VB macro that will turn a number to a date?
For example the numbers are like 21021967 that need to be turned into 21/02/1967
My goal is to have a macro run when my workbook is opened to turn particular worksheet tabs red depending is a date is previous to the current date.
Example,
I have 5 sheets. One of those sheets states and end date of 26-Jul-2012. Today is 27-Jul-2012, therefore, from this time forward the tab should be in red.
I am using the macro below to import every spreadsheet into a folder. I would like to modify it to check the sheets it is importing for sheet protection. If the sheet protection is turned on, I would like it to turn it off. The password for the sheet protection will be "PIR".
View 3 Replies View RelatedThis is bizarre - over the last year or so, on two machines (one Win98SE/Off2K, the other Win2KSP4/Off2K3), very occasionally a change I've made to Excel/VBA code has been ignored (eg to add a MSGBOX call) - even after I've restarted Excel. The workaround is to add a blank line and remove it again in the actual code module, but its both annoying and intriguing,
View 4 Replies View RelatedMy code runs so slow! The sheet only has 233 rows and 6 of them are not in the loop.
View 6 Replies View RelatedI need a message box with information before the code run. Yes - code run, No - exit code.
View 9 Replies View RelatedI have written some code intended to automatically clear a cell when data appears in it from an external source. In one spreadsheet, it seems to work exactly as expected, ie when the cell is polulated, it immediately clears the contents. In another spreadsheet, with exactly the same code, it will not automatically clear. If I put it in debug mode and step through it line by line, then it does do as expected but otherwise it won't.
View 9 Replies View RelatedI have used a code to find the character "-" and replace it with nothing ("") from several named worksheets across my workbook, which OzGrid helped me with before, and it worked fine. Now I've added the code into my module (at the bottom) it doesn't work. The rest of the code works fine, and it doesn't come up with any errors when I run it, but it just seems to ignore the 'find and replace' part of it.
Sub split1()
Dim fromSheet As Object
Set fromSheet = Worksheets(1)
Dim fromRow As Integer
Dim toRow As Integer
Dim lastRow As Integer
Dim errCount As Integer
Dim thisSectionName As String
Dim i As Integer ' loop counter
Dim rng As Range 'found range
Dim emptyCellAbove As Range
Dim rng1 As Range
Dim arng1 As String 'Address of 1st hit rng1
Dim ws(7) As String
Dim ii As Integer '2ND LOOP COUNTER
Dim iii As Integer '3rd Loop Counter
I'm trying to create a spreadsheet that uses one cell to enter a dollar amount and stores the amount entered in another cell. But I would like the input cell be zero after each entry, and the cell storing the amounts to keep a running total.
View 4 Replies View RelatedAttached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.
Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.
If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...
My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.
What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.
Test.xlsm
I have the following code, I have it running to just work on Sheet 2 but I would like it to be able to run on mulitple sheets, not all but a range like from Sheet2:Sheet30.
[Code]........
I have placed the code I am using below. It takes values from a hidden sheet (PACTAct) and places them on a visible sheet (Email). The code moves between the two.
It works at the minute by unhiding the PACTAct sheet then at the end re-hiding it. However I don't want the user to see this sheet whilst the vba is running. Is there a way I can simply refer to the worksheet without unhiding it?
Let's say I have 6 Worksheets in my Workbook with the following names:
Sheeta1
Sheeta2
Sheeta3
Sheetb1
Sheetb2
Sheetb3
And I have three Subs that I want to run, one Sub for two specific Worksheets.
How could I code my Subs so that the first Sub runs on Sheeta1 and Sheetb1, the second Sub runs on Sheeta2 and Sheetb2, and the last Sub runs on Sheeta3 and Sheetb3?
As you can see, the 1, 2 and 3 in the Worksheet names are what links the Subs to the Worksheet.
I want to place a message in cell
Sub OutOfStockDate()
templateSheet.Range("B15").value = dataSheet.Range("G5").value
If dataSheet.Range("G5").value = "" Then
templateSheet.Range("B15").value = "There is no Out of Stock Date"
End If
End Sub
However when I run this code I get the infamous 1004 error.