Code For Organizing A Worksheet By Rows: Not Running
May 13, 2009
Sub SplitOut()
Dim DataSH As Worksheet, OutSH As Worksheet
Set DataSH = Sheets("Input")
DataSH.Activate
lastrow = Cells(Rows.Count, "D").End(xlUp).Row
For Each ce In Range("D2:D" & lastrow)
Application.StatusBar = "Actioning " & ce.Row & " of " & lastrow.............
I am working on this spreadsheet that has a lot of information that will only get bigger as time goes on. I would like to organize the contents of one column into separate spreadsheets. So if I have "stacking" in one cell of that column, the whole row associated with that cell will go to a new spreadsheet labeled "stacking".
I have attached the sheet. I would like column D (Type_Code) to be organized by the words in that column. So I would have 5 or so worksheets labeled stacking, cartoner, wheel, inspection, etc. The data here is input by a machine.
I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
I have a sheet with several thousand rows. I want code that will do this:
- After finding a "D:" in column A (contained in the cell but will be at a different place each row), start a running total of values in column B. - When finding "F0" in column A... --if the running total of values for rows that have "D:" equals the value in column B with the "F0", delete the "D:" rows --if the running total doesn't match, reset the running total and search for the next "D:" - Repeat for all rows.
I inherited a spreadsheet to manage that is linked to a SharePoint table.
It is trying to populate a date that a certain "Tier" is selected (1, 2, 3, or 4).
It works great if I manually type in the tiers, but does not run on existing data (about 400 records) or lines that are updated and new via the SharePoint list.
How can I have this run on all of the existing lines and anything added or changed in the future from the list?
VB: Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub If Not Intersect(Target, Range("AD2:AD10000")) Is Nothing Then Application.EnableEvents = False
I am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?
I have a protected sheet so specific people can only see certain things. I would like code to Unhide a tab called "Estimating" and unhide Rows 2 through 9 and rows 24, 26 and 27.
I used the code in the link for "Create Worksheet Index" you referenced and it works great. Is there a way to have the Index and the "back to Index" links appear in separate stationary windows on the left side of the spreadsheets?
This is bizarre - over the last year or so, on two machines (one Win98SE/Off2K, the other Win2KSP4/Off2K3), very occasionally a change I've made to Excel/VBA code has been ignored (eg to add a MSGBOX call) - even after I've restarted Excel. The workaround is to add a blank line and remove it again in the actual code module, but its both annoying and intriguing,
I have written some code intended to automatically clear a cell when data appears in it from an external source. In one spreadsheet, it seems to work exactly as expected, ie when the cell is polulated, it immediately clears the contents. In another spreadsheet, with exactly the same code, it will not automatically clear. If I put it in debug mode and step through it line by line, then it does do as expected but otherwise it won't.
I have used a code to find the character "-" and replace it with nothing ("") from several named worksheets across my workbook, which OzGrid helped me with before, and it worked fine. Now I've added the code into my module (at the bottom) it doesn't work. The rest of the code works fine, and it doesn't come up with any errors when I run it, but it just seems to ignore the 'find and replace' part of it.
Sub split1()
Dim fromSheet As Object Set fromSheet = Worksheets(1) Dim fromRow As Integer Dim toRow As Integer Dim lastRow As Integer Dim errCount As Integer Dim thisSectionName As String Dim i As Integer ' loop counter Dim rng As Range 'found range Dim emptyCellAbove As Range Dim rng1 As Range Dim arng1 As String 'Address of 1st hit rng1 Dim ws(7) As String Dim ii As Integer '2ND LOOP COUNTER Dim iii As Integer '3rd Loop Counter
I make our employee schedule at work, and so in Excel I have eight sheets for one workbook. (Employee schedule, then each day of the week) On each day is a table separating the shifts. Morning, Split and Night.
I was wondering if there was a way for Excel to look at the schedule sheet, and then automatically place each employee and their shift on the following day sheets. (example: Joe has 2-10 on Monday, 10-6 on Thursday and Friday) So the Excel puts Joe underneath Split 2-10 for Monday, and Morning 10-6 on Thursday and Friday.
I have attached a file that I need a little guidance on. The list of information on the left needs to be organized and put in the appropriate tables on the right. Each row represents one person and I need to know how many people from the list fall into each category. For example: The first row has a gender of "1" and the age is "46" and the status is "1". Therefore, this person falls into the category associated with "K11", I filled it in already. My list will vary in length from 20 rows to 20,000. I am not sure how to go about this and have been frustrated by failed attempts.
I'm trying to create a spreadsheet that uses one cell to enter a dollar amount and stores the amount entered in another cell. But I would like the input cell be zero after each entry, and the cell storing the amounts to keep a running total.
Attached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.
Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.
If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...
My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.
What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.
I have the following code, I have it running to just work on Sheet 2 but I would like it to be able to run on mulitple sheets, not all but a range like from Sheet2:Sheet30.
I have placed the code I am using below. It takes values from a hidden sheet (PACTAct) and places them on a visible sheet (Email). The code moves between the two.
It works at the minute by unhiding the PACTAct sheet then at the end re-hiding it. However I don't want the user to see this sheet whilst the vba is running. Is there a way I can simply refer to the worksheet without unhiding it?
I have a macro, that basically runs a sub routine to count down say for example 1 min, at which time the workbook closes. However if the user opens one of the forms I would like to turn off the background timer macro. How can I do this with code? Is there code that does the opposite of 'application.run'?
Let's say I have 6 Worksheets in my Workbook with the following names:
Sheeta1 Sheeta2 Sheeta3 Sheetb1 Sheetb2 Sheetb3
And I have three Subs that I want to run, one Sub for two specific Worksheets.
How could I code my Subs so that the first Sub runs on Sheeta1 and Sheetb1, the second Sub runs on Sheeta2 and Sheetb2, and the last Sub runs on Sheeta3 and Sheetb3?
As you can see, the 1, 2 and 3 in the Worksheet names are what links the Subs to the Worksheet.
Sub OutOfStockDate() templateSheet.Range("B15").value = dataSheet.Range("G5").value If dataSheet.Range("G5").value = "" Then templateSheet.Range("B15").value = "There is no Out of Stock Date" End If End Sub
However when I run this code I get the infamous 1004 error.
I know how to enable/disable events using VBA code, however is there an option within excel to turn it on/off? My problem is this...
At the beginning of my code I disable events and at the end I enable it again (I need to do this to avoid being caught in a loop). However something is going wrong somewhere in my code and the code stops halfway through. I'm trying to test sections of the code, but I often inadvertently stop the code without enabling the events again. Therefore I can't get my VBA to execute again unless I close excel down and restart. This is a pain as I have to find my place in the code again!
I am writing a grading program, which during the course of functioning must run other code that has errors. I have used On Error Resume Next code to allow the program to keep functioning when it has run into errors so far. However, when a subroutine is called that calls another subroutine with incorrect parameters, I get a VBA error message pop up. Inserting On Error Resume Next directly into the other code doesn't stop this problem. I either need a way to have it skip over any call to a subroutine with improper parameters, or to check if a project can compile before grading it.
I'm looking for a opinion on what might be the best way to organize some data for sorting later.
I work for a company and we have a lot of equipment. I have a spreadsheet with each piece of equipment in a row. Column A has the equipment name with all the following columns having info about the equipment. One example would be voltage, some equipment runs at 120v and some runs at 208v, some runs either or and some runs at other odd ball voltages, although this is rare. I am trying to determine what the best way to enter data like this would be. Would I be better off entering one column labeled voltage and filling in the voltage, but this becomes problematic when a piece of equipment can run multiple voltages. The other though is to do multiple columns, one labeled 120v, one 208v, one 480v or whatever and go from there. Than put a "X" or Yes or something in the columns that apply.
I have this same scenario for multiple variables like connectors, hardware accessories and things like that. I am trying to think this through before entering all my data of what could be the negative effects of this.
Would it be possible/make sense to do a radio box?
My end result is hopefully to be able to say I want a piece of equipment that meets multiple scenarios like runs 120v, this accessory and this connector. Ideally setting up some sort of easy sort method in my column headers.
I have a spreadsheet converted from pdf having more than 30 Columns .for Example( name, address, tel. website , products etc).
Problem is that data is not consistent in all columns.Some have full range(all 30+ columns having data) and in some not( only some columns having data )
I want to organize data as per headers and leave cell blanks or fill in (N/A) where data is not available for that field. How can I correctly populate it.I need data as per headers in rows.
I have a list of 35k files and the number of files keep changing every week. At the end of the month I manually have to sort the files i.e move files to the respective folders, delete them or take no action. This takes me an entire day. There are useless files which needs to be deleted.
The format is as follows. File name is the file which I intend to move, File path is the current file path, New path is the path where I want the file to be moved, Action (Move, Do nothing, Delete) is the action i intend to take on the file.
I'm setting up a type of form in excel where I have some validated drop down lists and I'm trying to use a macro that will, upon a button click, take the data from the drop down lists that are entered into the boxes, and organize them into a chart on a different sheet of the document. This would be the form with some drop down lists.
Juice Type Apple
Juice Size 8 oz.
Juice Buyer Ronald
I want to add it in to a table with every button click filling in a new row in a table like this,
Is there a way to sort the worksheets in a workbook after they have already been entered. My clerk put 200+ worksheets in one workbook....out of order.
