Have created a userform for people to use to populate a spreadsheet and based upon the values filled in cells, and date segregators, formulae determine whether the line of data is classified as new / increased or reduced.
Obviously I can sort this in excel quite easily by this criteria.
At the moment it is about 500 rows deep,and is sorted by N/I/R.....
What I ideally want to be able to do is create 3 new worksheets, N/I/R and then select all the N's and bung them in sheet N, row 2, and then repeat selecting all I and then all R, and pasting in respective sheets.........
Obviously it can be done, but I am far too rusty to do this.
At the moment, all is sorted in one worksheet, alpha ascending...
1. Is where the user is putting in data. 2. Is a spreadsheet with the data choosen from the action of the user, but it is containing also the non-choosen data from the input spreadsheet. 3. IS how I want the data shown to me either automatic or thru a macro. So is there any code like IF or some Macro who would make this happen?
What I want at the end of the day is a list of products that the user have put in and nothing else, with the QTY and price and the sum of that.
I'm using Excel 2010. One spreadsheet I'm using has 1048576 lines and is a XLSX file. The other file has 65536 lines and is also a XLSX file. When I try to do a VLOOKUP, I'm given an error stating "invalid reference. This file version cannot contain formulas that reference cells beyond 256 columns or 65536 lines.
If both are XLSX files how do I expand the amount of columns in the one spreadsheet with 65536 lines? I thought all XLSX files had a million lines.
I have a very large inventory spreadsheet (30,000+ lines) where finished goods are listed on one line and the raw materials (parts) that make up that finished good are listed below. After the last raw material for a finished good is listed, the next finished good is on the next line (and so on). First, I need to sort the lines to eliminate certain common raw materials. Next I need to take the lowest raw material inventory level and have that as the default inventory level for the finished good.
My excel program on my home computer has a default number format so that when I type in a number such as "1", the spreadsheet displays 1E-20. If I enter the number as "1.0", the display will show correctly. I have tried changing the formats for the spreadsheet, but I still cannot get the program to work correctly. I tried reinstalling office, but nothing changed.
Code: Sub Final() Dim NameCell As Range For Each NameCell In Sheets("! Names").Range("B1", Sheets("! Names").Cells(Rows.Count, "B").End(xlUp))
[Code]....
I want to pull data from ! Names. This code already Renames a new sheet from the ! Names sheet and also puts there name in cell C2 and phone number into cell C3 of the created sheet. I want to put more data from the ! Names sheet. How would i go about adjusting current code to do that?
I've written a piece of code that is so long, I have to use the scroll bar to see the whole of it, which isn't very user friendly
if there's a way of splitting long lines of code over say 2 or 3 lines, so I can read the whole thing without having to use the scroll bar? I've noticed some people use _ at the end of the code and then continue writing on the next line, but when I do this, I get an error message saying
"Compile Error : Expected : line number or label or statement or end of statement"
Adding ' in the beginning of a line converts the rest into comment line. I wonder if there is an easy way to convert a huge area into comment line to try something on code. I couldn't find such an option in the menu.
Does anyone know the code I would use to input a message box into a spreadsheet that says "Do NOT click on this cell" when a user clicks on cell C5? I only want this message to come up if the user click on cell C5.
I am having trouble with my workbook. When I am changing the value in the main cell ("Moses!B5") the whole program freezes. The code is as follows and was developed to ensure the values in my cells did not change as the main cell value changed:
Private Sub Worksheet_Calculate() For Each c In Range("A1:AF14") If c.Value = 1 Then c.Value = 1 Next End Sub
I think the problem is that all of my sheets are calculating and I only want the one which contains the cell which matches my main cell ("Moses!B5"). Is there a way to trigger calculation only for the sheet which contains a date cell matching my main cell?
below is some code from a spreadsheet I am working on,,,,,, as you can see it adds items to a dropdown list in a combo box. This may require an update at another time,,,,, is it possible for the list to be updated from a list in the spreadsheet, therfore preventing people from accessing the code
I need some VBA code to hide columns in spreadsheet when run. Basically, in row 7, I've entered HIDE in the columns that I want to hide when the macro runs (i.e. columns F,J,H,I,K, O,P,R).
i have a spreadsheet that uses control functions to run vb code. i am trying to make things as user friendly as possible for all of the employees. i am currently working on a control to clean out any rows that the first cell has a value of "N/A" or is left blank. i have the code for the blank cells, but cannot figure out how to add the "N/A" cells.
here is the current Private Sub CommandButton2_Click() Dim rng As Range On Error Resume Next Set rng = Columns(1).SpecialCells(xlBlanks) On Error GoTo 0 If Not rng Is Nothing Then rng.EntireRow.Delete End If End Sub
The code that I'm using is supposedly not allow spreadsheet to be opened after a certain date, or does not allow a user to press any of the command buttons and comes up with a message saying the spreadsheet is closed for new entries.But is not working for me.
I have a spreadsheet which was formatted from VB code. Within the sheet there are four date columns where some dates show as 00/01/1900 (due to them having '0' in at the time of running the code). I am trying to run some code to blank out all cells showing the 00/01/1900 date, but the code just isn't touching it. I reverted to simply recording the 'find and replace' function and inserting into my code, but those irritating dates still remain.
I'm creating an Excel template to reduce data entry errors on a file various departments submit with data, and have the VBA code associated with the spreadsheet close to done with one exception - restricting the active worksheet rows to just those with data to avoid having a number of rows with just comma separators. I can find the VALUE of the last active row (see code below,) but I'm trying to find the address of that last active cell, so I can plug that into my ActiveSheet.Range statement. Here's my code. As you'll see, I have the ActiveSheet.Range statement with hard-coded cell addresses. The A8 is the first row following spreadsheet headers, etc, but I'd like to be able to substitute a variable for the ending cell.
Private Sub CommandButton1_Click() Dim Rowcount As Integer Dim offset_num As Integer FileName = ActiveSheet.Range("B4").Text 'Code to find value of last active cell With Sheets(1) MsgBox .Range("C" & .Cells(.Rows.Count, "C").End(xlUp).Row).Value
I have data on Sheet2 and would like to only copy all rows associated with column D2 to the Sheet3. For example Sheet2 has two different values Voice or Data I would like to copy all rows associated with column D that contains voice to Sheet3.
I am having trouble trying to develop a code to include into a spreadsheet for work. It will be a live spreadsheet accessed by a few people who will have control over there own columns in the spreadsheet (2 columns are designated for one project) Each Project director is to edit the info about their project.
So my goal is to put a code in cell C3 that shows the date that cells C4-32 and D4-32 were last updated.
When I close my worksheet excel asks me if I wish to save the file one last time, if I click 'yes' I would like some more code to be executed and then have the spreadsheet save itself and close definitively, how can this be done using vba?
I have created a userform but just unsure how to format the code in order to get information to appear in a spreadsheet http://www.srfl.ca/userform.htm
Need a code that sends emails to the intended receipients based on hold codes if Columnd J reads as YES Email formats are listed on "Email Format" tab, code should pick the required field value from the table (Hold Report).
Analyst name, Phone number are entered in the text boxes (data validation for these is desired)
option boxes are used to send email based on the selection as below
if "send initial email without attachment" is selected then emails should be sent without the attachments
if "send initial email with attachment" is selected then emails should be sent with the attachments
Attachments are usually .PDF files and are stored on users desktop with file name as .pdf
if the follow up otion is selected the subject line on the mail should be appended as *** 1st Follow-Up*** along with standard subject line
Rest of the requirement remains same for followup option (same email format is used) based on the option selected, code should be able to send emails with or without attachments. I have provided three command buttons that are intended to work as follows;
Validate data: need to validate the data to ensure that each row has atleast one email address in "TO" column and there are no spaces in the email address.
Clear Data: Should clear the existing data from the table
Send Emails: Should send emails
Standard subject line is a combination as below
Invoice on Hold for ; Invoice number: ; PO Number: ; Invoice Amount:
Note: Column H and I apply only for hold codes Qty Ord and Max Ship Amount
I would like to extract and compile the information contained in these cells: a5,c5,a6,c6,c7,a14,g14,e16,g16,e18,i18,a20,g20,h22,j22,h24,l24 all the sheets.
New sheet would contain the information of each sheet eg. Column A2= file name
And Row B2 to R2 or whatever will be the corresponding cells mentioned above for each cell. The code I have only brings back the file name but only a5 from the range but not the rest.
VB: Sub MergeAllWorkbooks() Dim SummarySheet As Worksheet Dim FolderPath As String Dim NRow As Long Dim FileName As String Dim WorkBk As Workbook Dim SourceRange As Range
I have a sample spreadsheet (uploaded to this thread) in which I have 10 command buttons named 'Video 1' to 'Video 10'. Next to these buttons is a Windows Media Player Object. I require the code that upon clicking any of the video command buttons, the relevant video is opened and shown in the windows media object within the same sheet (sheet1).
I'm sure the code for each button will be the same apart from the cmd button reference number/name and the link to the file to be played.
If we assume all the videos are called as per their buttons i.e. Video 1.wmv, Video 2.wmv ... Video 10.wmv; and the location of these files is under 'C:Films', can someone post up some code for button 'Video 1' making it clear which variables to change for linking to the different files.
