Is it possible to have excel 2007 open a workbook, activate the first sheet "output" and activate the first empty cell in column A - ready for user input? i.e.
I want my user to open workbook "EHB Stock" and automatically the first empty cell in column A of worksheet "output" is activated and ready for input.
The rest of my code is:
I have a multi- sheet Excel workbook and I need to develop a macro based control that, with a single click of a Button in a sheet named REPORT, will take me directly to the last empty cell in column A of a sheet named REGISTER in the same workbook.
View 2 Replies View RelatedWhy can't I get this code to work? The first line seems to work ok but not yet sure as the rest doen't work.
I have tried NEXT_YEAR as a string and as a number but I keep getting an error.
Sub test()
NEXT_YEAR = "2013"
ChDir "J:Maxtor backupFire DeptVacations " & NEXT_YEAR
Workbooks.Open(Filename:= _
"J:Maxtor backupFire DeptVacations " & NEXT_YEAR "VacGrp - 1 - " & NEXT_YEAR & ".xls""", UpdateLinks _
:=3).RunAutoMacros Which:=xlAutoOpen
End sub
Below is the code I am trying to replace and it works fine.
ChDir "J:Maxtor backupFire DeptVacations 2013"
Workbooks.Open(Filename:= _
"J:Maxtor backupFire DeptVacations 2013VacGrp - 1 - 2013.xls", UpdateLinks _
:=3).RunAutoMacros Which:=xlAutoOpen
I want to be able to launch code in an add-in to perform a check when other workbooks are opened by the user. Code in the Open event for the add-in launches when Excel opens, not when each workbook is opened
View 2 Replies View RelatedHow can i manage that my code in the Workbook_Open() event is run when i open that workbook with some code from an other workbook?
When i manually open that workbook, excel runs all events, including my Workbook_Open() event, but i need to open this one out of an event of an other workbook.
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
How do I use the GoTo so that I can Specify A line of Code to go to...
for example
how to design a piece of code that would allow me to check whether a workbook which is not currently opened and shall not be opened at all, contains a certain value. Here my developement which failed to prodeuce the desired result:
Sub test()
Dim wBook As Workbook
Set wBook = Workbooks(Filename:="D: arget.xls")
If wBook. Sheets("AAA"). Range("A1").Value = 123 Then
Range("C3").Value = "Good stuff"
End If
End Sub
Is there any way this can be done without opening the target file??
I have a workbook template that will have multiple tabs. I would like to have it that when you open this workbook the date populates in A1 for each tab and is static. At that point they can save with another name leaving the template intact so when you open it again (on another day) it will populate with the current date. Is this possible and if so how?
View 7 Replies View RelatedOn opening of an excel document is it possible to have a date in a cell that will continuously update. =now() enters the date required but if i was to go into the sheet days or whatever later is there a way that this will update automatically??
View 3 Replies View RelatedI have a need to open a file from my companies intranet. My current method was to open said file via the method that the recorder gave me. However, I would like ot be able to open a said file without having to start open another workbook.
This is the path:
[url]
So the command is this:
Workbooks.Open [url]
Links are not actual links
So what I need to know. Is how can I open this file without opening a workbook. I haven't been able to use the VB "Open Statement" to open a file and I don't believe that I've been successfull using the Filesystem object either.
How do i write a line in a macro that basically says:- If this box say (m1) has data in it follow the next procedure that i have designed (which is copying data from one spreadsheet to another and re-designing it). However if this set box is empty do not copy anymore information over.
View 2 Replies View RelatedIs this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedI am trying to run a macro that will hide rows when one cell is empty and another is not. Example: hide row when cell g is empty, but cell b is not. Or something to that effect. So far I've only used this code, but I would like to know how I can modify the code to fit the parameters I need:
Sub HideRows()
On Error Resume Next
With Range("B1:B300")
.EntireRow.Hidden = False
For i = 1 To .Rows.Count
If WorksheetFunction. Sum(.Rows(i)) = 0 Then
.Rows(i).EntireRow.Hidden = True
End If
Next i
End With
End Sub
I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
I am using the below code (i have combined different bits of code which i found on these forums) to open a new workbook, copy all the data in it and paste it into Sheet2 in the active workbook . Also, i want the data to be pasted on the next empty row as there is already data in Sheet2. The data that is being copied and pasted has the same format and it is going to be repeated many times.
The problem i am having is that it is not offsetting the data to the next empty row - i think it is a simple change but i can't seem to get there :s
Also, the code is currently selecting all of the data from the workbook that i open - is there a way i can select all of the data, excluding the first row (the first row contains the headings which i already have in Sheet2 in the active workbook).
[Code].....
I have created userform and it works fine. Following code assigned to 'SUBMIT' button in userform - works fine. I am trying to include code where certain data from userform is also copied to workbook2 ( of course without opening it)- as marked in red...below
[Code].....
I want to find the cell location of the largest value in a specific column.
for example: column C has 5 rows of different values : 5, 12, 4, 7,9 and I want to find the cell reference of the largest number which is 12.
I know that I need to use "Large" function in order to find the largest number, but what do I have to do in order to find the cell location of it?
I want to write a simple macro that does the following.
If cell A1 = YES goto cell A1000
If cell A1 = NO goto cell B1000
If cell A1 = MAYBE goto cell C1000
I will have the 3 options available via a combobox
i have this:
Sheets("Sheet2").Application.Goto Reference:="R1C1"
it is supposed to go to cell A1 in Sheet2.
but it doesn't go to sheet 2?
Can I search a document without opening it?
If not how do I open a file if not already opened without using "ON ERROR"
I am trying to make one of my macros open a file then switch back to the orignal file and then running the macro.
here is my
I have a spreadsheet that data gets exported to from a software program. There is information such as customer name, part number, inquiry number, etc that I'd like to use to develop a log of all my estimates I create for parts. I'd like excel to take the cells I select and insert them into certain cells in the other workbook and automatically save that workbook. This will create a log of all my estimates where I can then link the full estimate to the log. The information will have to go in the next available row. Is there any way I can accomplish this without having to open the other workbook and save the work book each time?
View 1 Replies View Relatedhow to prevent a workbook from opening if another excel document is open and if a visual basic window is opened.
View 8 Replies View RelatedI am trying to click one 1 cell, which will automatically use a lookup of the cell values and find the correct sheet to go to.
All of this using VBA.
I have a spreadsheet where I had a new column on a daily basis. I am trying to create a macro to automate some parts of this. I would like to select the next blank cell on row 1. So in this instance, cell M1, however the following day it would be N1. This is the part I am unsure of how to do. After this I will be doing a vlookup to add the new values, which I should be able to sort out no problem.
I have seen people using COUNT and OFFSET to select the last cell +1, however I am unsure how to link to two together.
I have designed a workbook for a reservation planner which lists all production reservations over the whole year. Because of the limitations in columns, I have had to split up the workbook into 3 worksheets. I have a quick links section (52 command buttons) which redirects the user via macro to the specific week they require....
Sub Week12()
Application.Goto Reference:="R6C256"
Application.Goto Reference:="R6C118"
End Sub
The first split is at week 17 which is on sheet2. I am working far too hard at the moment and I cannot figure how to go to the sheet in addition to the cell references as above.
I want is when Enter is pressed on Range Name =Match then, Goto Cell U3
To clearify what i need is when enter is pressed on any Single Cell belonging to the Range given the name "Match" then, Goto Cell U3...
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I have just added some code to make my workbook close after it has been inactive for 5 minutes...this works fine except it opens itself up again after 5 minutes. If I select 'Enable Macros' it closes immediately and if not, it will stay open.
Here is all of the code I put in for the auto shut down:
ThisWorkbook:
[Code]....
Module 1
[Code] ....