VBA Macro Code To Copy Cell A1 And Paste In First Empty Cell Down Column D?

Jul 30, 2013

Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.

View 3 Replies


ADVERTISEMENT

Macro-Copy&Paste Fixed Data Ranges Into Last Empty Cell Of Specific Column

Apr 27, 2009

I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.

I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.

(1) Name (2) Address (3) ID# (4) Control#

Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)

Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.

MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9

MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.

The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.

I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.

Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.

I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.

So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.

Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.

Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub

View 10 Replies View Related

Copy Paste Into Last Empty Cell In Column

Aug 23, 2007

I need my macro to copy and paste from one worksheet to another, which is fine. However I need the copied value to be pasted into the last empty cell in a specific column. It is currently pasting each copied value into the last empty cell in column 'A' regardless of which column I specify it to copy to in my code.

View 5 Replies View Related

Copy Recent Cell Value And Paste In The Next Empty Cell Down.

Dec 15, 2008

I am trying to do is create an invoice log of payments received. For each payment there is a cell value of how many products the customer has which is updated on each payment entry. What I want to do is have a macro that runs when all other data is entered to update this value.

So I have a main customer sheet where it holds the product amount in the same workbook, let's call this cell $A$1 holding a value of 47. I go to enter a payment record on the invoice sheet, once this is complete the macro will run and look to $A$1 on the first sheet and update $B1 on my invoice sheet. On the next entry it will update $B2, then $B3 and so on.

View 2 Replies View Related

Copy/paste To Empty Cell

Aug 23, 2008

The following code is intended to copy and paste the value from cell I2 to the first unused cell in column K. There is is header in cell K1. It works fine if there is a value in K2 or K3, etc., however, if K2 is blank (all cells beyond K1 are blank) I get an error 400 when I run the sub.

View 14 Replies View Related

Copy And Paste Into The Empty Cell

Oct 3, 2008

I'm have never learnt VB before and would like to try to write one to perform the following: If the next cell isempty, go to the last cell, copy it and paste into the empty cell; Else if the cell is not empty, go to next line and repeat the procedures until reach row =10000

.(BEFORE)
Row 1:Product A
Row 2:
Row 3:
Row 4:
Row 5:Product B
Row 7:
Row 8:
Row 9:......

View 3 Replies View Related

Copy / Paste A Row (without Leaving Empty Row Behind) If Cell Contains A Value

Jul 24, 2014

I have 2 worksheets, one called "Consolidated" and one called "Converted".

I would like to have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, I would like the entire row to be cut and pasted onto the "Converted" worksheet.

I have managed to do this with my current code:

[Code] .....

However when this macro runs, the row left behind on the original sheet is a blank row and I don't want this. I would like it to be continuous spreadsheet, not dotted with random blank rows!

View 6 Replies View Related

Copy, Find Next Empty Cell, Paste

Mar 20, 2005

I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.

View 7 Replies View Related

VBA - Paste In First Empty Column Cell?

Dec 9, 2011

I need the code to paste my selection in worksheet SORT, into the first available cell in column A. Intention is not to overwrite existing values in column A.

'
Sheets("tis").Select
Range("AC2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("SORT").Select

'I need the code to paste my selection in the first available empty cell in column A, so I don't overwrite any existing values in column A

End Sub

View 2 Replies View Related

VBA To Copy Non Empty Cells Then Paste To Next Available Cell In Another Worksheet

Aug 15, 2014

I want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks

then paste it into the first free cell in column B of sheet 2

View 1 Replies View Related

Copy And Paste Cells Into Another Cell If There Is An Empty Spot, If Not Move Down.

Mar 8, 2007

i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:

Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub

View 4 Replies View Related

Macro To Paste Data To Next Empty Cell?

Dec 13, 2013

I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.

[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'

[Code]....

View 1 Replies View Related

Using A Macro To Paste Format Until An Empty Cell

Nov 27, 2008

I would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.

View 5 Replies View Related

Modify Macro To Paste Results To Last Empty Cell

Feb 21, 2014

I have this macro and at the present time, can only compare two worksheets. One of my worksheets contains column headers with data, the other worksheet just contains column headers. The macro will match the data against the column header and paste below. I'm doing it this way because I have several tables I export from a MySQL database, but some of them have more fields than others so I was trying to get all of the data to line up in under the correct column header from each table. I need editing the macro to allow for

1) More than one worksheet to be analyzed at a time
2) If the first request is not possible, I would like for the macro to paste results at the next empty cell. As of now, it will only copy one at a time (which requires me to house the data in another worksheet everytime I run the macro).

Below is the code:

Dim ws1 As Worksheet, ws2 As Worksheet
Dim HeaderCells As Range, Hdr As Range, hdrFIND As Range

Application.ScreenUpdating = False 'speed things up
Set ws1 = ThisWorkbook.Worksheets("HEADERS") 'Define name of worksheets
Set ws2 = ThisWorkbook.Worksheets("B")

[Code] .......

View 1 Replies View Related

Copy/Special Paste Data Within A Range To Next Empty Cell Then Mark The Copied Area

Aug 29, 2008

I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.

I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............

View 4 Replies View Related

Copy Method (copy From The Selected Cell And Paste One Cell Below(next Row) In Same Column)

Oct 23, 2009

what is wrong in this code, it does not paste.

HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"

I am trying to copy from the selected cell and paste one cell below(next row) in same column.

View 2 Replies View Related

Copy & Paste To First Empty Column

Jun 9, 2007

Need code to copy a column from a worksheet, and paste it in the first empty column in a second worksheet? I can do this easily when I want to copy/paste to the first empty row using the

Sheet3.Select
Range("A1:A10").Select
Application.CutCopyMode = False
Selection.Copy
Sheet2.Select
Dim LastCell As Range
With ActiveSheet
Set LastCell = .Cells(.Rows.Count, "A").End(xlUp)
If IsEmpty(LastCell) Then
'do nothing
Else
Set LastCell = LastCell.Offset(1, 0)
LastCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End If
End With

but I cannot find a way to change this to columns!

View 7 Replies View Related

Copy And Paste Data If Row In Column N Is Empty.

Dec 29, 2009

Copy and paste data if row in Column N is empty.
Here is my current code

View 2 Replies View Related

VBA Code - Copy Particular Cell And Paste As Value

Mar 8, 2013

I have the following bit of VBA code which copies a particular cell and pastes it in the next available cell in column "AD", but I need to paste it as a value. How do I incorporate this into the code?

Sub copypaste()
Worksheets("USD IR Swap 10 Yr").Range("L5").Copy _
Destination:=Worksheets("USD IR Swap 10 Yr").Cells(Worksheets("USD IR Swap 10 Yr")
.Rows.Count, "AD").End(xlUp).Offset(1, 0)
End Sub

View 5 Replies View Related

Copy Values Of Cells In Column To 1st Empty Cell On Row

Apr 8, 2008

I have two sheets and I want to copy the values in a row in the first sheet to the second sheet. I am doing the following:

Sheet2. Range("A1").Value = Sheet1.Range("A1", Sheet1.Range("A1").End(xlToRight)).Value

But this only copies the value of A1 in Sheet1 to A1 in Sheet2. How should I modify it to copy the values for the whole range to the second sheet?

View 9 Replies View Related

Macro - Select Last Non Empty Column And Paste Information In Another Column?

Mar 25, 2013

I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.

View 3 Replies View Related

Macro To Find Value In Cell And Copy / Paste To Other Cell

Dec 11, 2013

I have the following code, so far:

Code:

Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1

[Code]....

What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??

In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.

View 2 Replies View Related

Macro To Copy A Cell And Paste That Cell In Outlook

May 30, 2002

Is it possible to do a macro to copy a cell in excel and paste that cell in outlook and return to excel

View 9 Replies View Related

Macro Copy / Paste Last Data Entered To Last Empty Row Of Different Worksheet

Mar 15, 2013

I am looking to create a macro to be assigned to a button that copies the last row of data entered and then pastes it to the last empty row on a different worksheet. This is a dummy spreadsheet to work with (I have more data, but the concept is one in the same). Sheet1 ("Branch1"), Sheet2 ("Branch2"), and Sheet3 ("All"), the names in brackets are names of the sheets, but for ease I'll refer to them as Sheet1, Sheet2, and Sheet3. I have columns beginning in B as follows: Date, Branch, Currency, Coin, and Total (the branch and Total are tied to formulas, however I just need to the text values and formats to come over to the other worksheet). have the portion regarding the copy of the last row in Sheet1, however it won't PasteSpecial.Selection in Sheet3 as it says the cells are not sized or formatted correctly.

VB:
Sub CopyB2()
lr2 = Sheets("Branch2").Range("B" & Rows.Count).End(xlUp).Row
lr3 = Sheets("All").Range("B" & Rows.Count).End(xlUp).Row + 1
Sheets("Branch2").Range("B" & lr2).EntireRow.Copy Sheets("All").Range("B" & lr3)
End Sub

View 1 Replies View Related

Macro - Copy And Paste New Data To Next Empty Row On Summary Sheet

May 8, 2014

I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.

See the attached file for my workbook : Book1.xlsx‎

View 9 Replies View Related

Copy Cell & Paste Below Last Used Cell In Column

Oct 16, 2007

I need to copy Invoice id from Column B to Column A, firstly it would be to the cell one down and one across, ie data from B3 is copied to A4. I then need to continue to copy this data down in column A but only while there is a date in column B.

View 7 Replies View Related

Copy Cell & Paste To Last Used Cell Of Column

Nov 26, 2007

I have a workbook that I have set up some VBA code so that when it opens I have a box ask, "View Data" or "Start New Audit." When the user clicks "Start New Audit" Excel creates a new sheet, names it based on the current date (in yyyymmdd format), and copies a range from a sheet called "Master Sheet" to this new sheet. These new sheets are for users to input data on a daily basis. As that data is typed in, there are four different columns that have an average function at the bottom. I need the result of that average function to be sent to another pre-existing sheet on the next empty row so that I can create a chart out of it.

View 4 Replies View Related

Copy Preceding Single Cell Data Into Following Empty Cells In Same Column

Sep 5, 2013

I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.

Here is an example of what I need done:

This sheet:

Sheet1

*
A
B
C
D

1
Item Number
Type
Type 2
Feature

[Code] ...

Should look like this:

Sheet1

*
A
B
C
D

1
Item Number
Type
Type 2
Feature

[Code] .....

View 9 Replies View Related

Macro - Move To Next Empty Cell In A Column

Sep 30, 2010

In columnA I want to jump to the next blank cell in a list that continues to grow. So the first time I run the macro I want to go (blank) cell A5 to paste in some data. The next time I run it, it would need to go to cell A6 and so on.

When I do this manually, I simply hit ctrl down-arrow (takes me to the last cell w/data) and then one more down-arrow to take me to the empty cell below.

When I do this in the macro it seems to remeber the cell as an absolute reference (if that's the term) and so it just copies info in the same location as previous, instead of the next empty cell.

View 5 Replies View Related

Editting Macro To Select Last Empty Column To Paste Data

Nov 30, 2008

I have a macro that automatically takes data from one sheet, copies it and pastes it on another sheet, but I want it to select the empty column that is to the right of the last column to contain data (so basically the next empty column). What code would I enter into editting my macro to be able to do this please?

Also, one thing I've tried to do with my macro is that when I select the data, it's suppose to select from the first name to the last. When doing the actions for the macro, I use "Ctrl + Shift + Down Arrow Key" to make the selection select the bottom of the list. However, when running the macro, if the list is longer (or shorter), the macro selects that number of cells instead of the action of just going to the bottom of the list. For example, if during the actions of the macro, I recorded using the Ctrl + Shift + Down Arrow Key that 50 cells were selected...next time if I have 60 cells, only 50 are selected, even though I used an action command which should select all the cells in that group (in this case being 60). Is there some code I can add to that so this would work correctly?

In case its required, here is the code from the macro:

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved