How do i write a line in a macro that basically says:- If this box say (m1) has data in it follow the next procedure that i have designed (which is copying data from one spreadsheet to another and re-designing it). However if this set box is empty do not copy anymore information over.
View 2 RepliesCan anyone please help me with some code to rename tabs to match a value in a cell.
When I receive the spreadsheet it is in the standard Sheet1, Sheet2 and so on.
Now in cell E2 there is a Budget Cost code. Now I have to manually rename the tabs to match this code and it is quite time consuming.
Also Sheet1 is different as it has a logo in cell E2 so the budget code on that sheet is in E3 but like I said earlier Sheet2, Sheet3 and so on the budget code is in E2.
Can anyone post a little macro that will rename all the tabs on the worksheet to match the budget code in the above mentioned cells.
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedI am trying to run a macro that will hide rows when one cell is empty and another is not. Example: hide row when cell g is empty, but cell b is not. Or something to that effect. So far I've only used this code, but I would like to know how I can modify the code to fit the parameters I need:
Sub HideRows()
On Error Resume Next
With Range("B1:B300")
.EntireRow.Hidden = False
For i = 1 To .Rows.Count
If WorksheetFunction. Sum(.Rows(i)) = 0 Then
.Rows(i).EntireRow.Hidden = True
End If
Next i
End With
End Sub
Is it possible to have excel 2007 open a workbook, activate the first sheet "output" and activate the first empty cell in column A - ready for user input? i.e.
I want my user to open workbook "EHB Stock" and automatically the first empty cell in column A of worksheet "output" is activated and ready for input.
The rest of my code is:
I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
I have attached a file where I’ve made some dependent validation lists. When the first box is changes it clears the last 2 with this bit of code
View 2 Replies View RelatedI have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
See attached file illustrating exactly what I'm trying to do.
I won't repeat the exact same things I wrote in the file, but the Summary is that I need to first make such that only certain check boxes can checked at any one time, then make the command button run certain macro(s) depending on which boxes are checked.
I have developed the following code to colour cells dependent on reference to adjacent criteria (in Col D).
Is there anyway I can simplify this code to avoid three separate "For each" statements?
Code:
For Each c In Range("E12", Range("e" & lastrow))
If c = "" And c.Offset(, -1) "" Then
c.Interior.ColorIndex = 7
[Code] ..........
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
Situation:
I have two drop down lists 1) Country and 2) States/province
Country has list: [US, Canada]
If "US" is selected, [Arizona ,Florida, NewYork] is listed in the 2nd drop down list
If "Canada" is selected, [Alberta, Ontario, Quebec] is listed in the 2nd drop down list
Scenario:
First, I select "US" and choose the states to "Florida"
Next I change the country to "Canada" and forgot to choose province
Then, the 2nd dropdown list is changed to [Alberta, Ontario, Quebec],
BUT the current value is still "Florida"
Probem:
Now I have "Canada" and "Florida" selected in the sheet
Question:
If the primary list is changed, can I make the 2nd drop down list to show a default value (e.g. blank or the first entry i.e. Alberta)?
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
i was currently gave this code. Sheets("Sheet1").Cells(Rows.Count, "A").End(xlUp)(2) = Me.TextBox2.Text Is there away this can modified to go to the next completly empty row in stead of just "A"? Like maybe A thru L or the entire row would be ok.
View 5 Replies View RelatedWhat would be some code to select the 1st empty row in a sheet. I need to select entire row. To be easy it could be first empty cell in A, but would like whole row selected.
View 3 Replies View Relatedautomatically hiding empty rows on my table... though the table has been referenced via string of formulas which I added up on my worksheet.. Some of the rows on my table are empty and I tried a VBA code on automatically deleting the rows but then I realized that if that certain 'referenced' string of that cell is not empty anymore, that would cause me much trouble.. so basically I need a code that would automatically hide the rows that displays a result of "" and unhides when it is not empty.
View 14 Replies View RelatedI need a code that I can run that will delete all rows that have nothing in at the bottom of the sheet. What I mean is I will be printing a file and because rows have been deleted that had data in a lot of sheets are being printed and wasted. So what I need is a before close code or something that will actually make the last row with data in the last row!
View 2 Replies View RelatedI have a database and at times I have empty rows. I am trying to write code that looks at the database (it may change daily) and deletes the rows that are empty. The code I've written does NOT work:
Sub emptyrows()
Dim emptyrows As Object
Set emptyrows = Cells(65536, 255)
If Rows = "" Then
Selection.Delete Shift:=xlUp
End If
End Sub
Can VBA code that inserts between written rows a certain number of empty rows (and to be able to specify somewhere in the code the number of rows to be inserted)
View 9 Replies View RelatedI have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
how can we disable/enable a cell based on a condition which is dependent on other cell data
View 4 Replies View RelatedI'm trying to set up a dependent cell (B) based on what is in the independent cell (A)
If A is blank, B should be blank
If A has any value other than X, B should display a set string Y
If A contains X, B should contain a drop down list with a range of choices.
I've tried setting it up as a dependent validation cell and I've tried using OFFSET, but the best I can do is to get three different drop down lists to populate cell B. One with only string Y, one with only a blank, and one with the range of choices. The problem is in the first two cases above, I want the cell to fill automatically with either blank or string Y -- I don't want them to just be drop down options, with the cell displaying the last value that was input.
Say in A1 i have either Yes or No, in B1 i have a dropdown validation from a list if A1 is Yes and "n/a" if A1 is no.
I thought if i renamed my list validation to "Yes" and labelled "n/a" as "No", then using =INDIRECT(A1) as my list validation would do the trick.
In Excel it's possible to create a link dependent of a cell.
Example
='C:UsersAMDesktop[" & C9 & "]Sheet1'!$B$3
where C9=Andrew.xls
How can I get Excel 2003 to place a specific name (that is not in the spreadsheet) for cells in column A for which the cell value in column B contains a particular word?
View 4 Replies View RelatedI have been automating reports that will be generated in word documents for every company. The baseline is that I have a excel sheet which contain the data inputs and a word template document (template with bookmarks). I have written a macro that generate the reports when the user clicks the button but found that there some reports that generates empty bookmarks since there is no data for the corresponding bookmark. I have uploaded the excel sheets that has the full data and the setup sheets. The setup sheet has the Column Number, Bookmark Name, Description. The data sheet has the data values and the code info sheet has the name of the template doc and the name of the destination folder where the reports will be generated and stored. My requirement is to delete the empty bookmark from the report named "Blackberry". where to write the macro for deleting the empty bookmarks and its sentences (whether its in excel book or word template doc)?
View 3 Replies View RelatedThe spreadsheet I am working in has $ which I need to total. The information, or rows, can vary from day to day so there is no static place to have a cell with an @sum. Management wants me to add a pretty line that says
'Total' in one cell and the $ next to it. I have about 30 sheets with columns to total. Yuck, takes forever.
How do all of you total if you don't know the last row? At the top?
I thought it might work to put an @Sum in the last row of the spreadsheet, in the column
I need to total, and having a VB code to delete empty rows. That would be automatic.