Macro Goto Next Blank Cell
Oct 19, 2009
I have a spreadsheet where I had a new column on a daily basis. I am trying to create a macro to automate some parts of this. I would like to select the next blank cell on row 1. So in this instance, cell M1, however the following day it would be N1. This is the part I am unsure of how to do. After this I will be doing a vlookup to add the new values, which I should be able to sort out no problem.
I have seen people using COUNT and OFFSET to select the last cell +1, however I am unsure how to link to two together.
View 9 Replies
ADVERTISEMENT
May 17, 2007
I have designed a workbook for a reservation planner which lists all production reservations over the whole year. Because of the limitations in columns, I have had to split up the workbook into 3 worksheets. I have a quick links section (52 command buttons) which redirects the user via macro to the specific week they require....
Sub Week12()
Application.Goto Reference:="R6C256"
Application.Goto Reference:="R6C118"
End Sub
The first split is at week 17 which is on sheet2. I am working far too hard at the moment and I cannot figure how to go to the sheet in addition to the cell references as above.
View 5 Replies
View Related
Apr 8, 2012
When I select a range of cells (not col or row headers), then use Find & Select | Goto Special | Blanks, the program keeps saying "no cells were found."
Excel 2010
ABCDEFGH1
1/2/20121/3/20121/4/20121/5/20121/6/20121/7/20121/8/2012200
0
[Code]...
View 2 Replies
View Related
Feb 1, 2008
I have to copy and paste from 15 different worksheets to one worksheet each week. The size of each copy varies from 500 to 1000 rows and is sequential for each worksheet. In other words, if I am copying rows 1 to 500 this week, then next week I will copy from 501 to 1000. I would like to do this in a macro. I can easily figure the ranges each week by incrementing, and they can be listed in a workbook. Is there a way to copy that range into the macro as it is running? It would kind of be like saying the range to copy is '=B5' and B5 cell contains the script A501:M1000.
View 9 Replies
View Related
Jul 23, 2009
I want to find the cell location of the largest value in a specific column.
for example: column C has 5 rows of different values : 5, 12, 4, 7,9 and I want to find the cell reference of the largest number which is 12.
I know that I need to use "Large" function in order to find the largest number, but what do I have to do in order to find the cell location of it?
View 9 Replies
View Related
Jan 19, 2010
I want to write a simple macro that does the following.
If cell A1 = YES goto cell A1000
If cell A1 = NO goto cell B1000
If cell A1 = MAYBE goto cell C1000
I will have the 3 options available via a combobox
View 9 Replies
View Related
Jul 9, 2006
i have this:
Sheets("Sheet2").Application.Goto Reference:="R1C1"
it is supposed to go to cell A1 in Sheet2.
but it doesn't go to sheet 2?
View 4 Replies
View Related
May 22, 2009
I am trying to click one 1 cell, which will automatically use a lookup of the cell values and find the correct sheet to go to.
All of this using VBA.
View 6 Replies
View Related
Jan 18, 2007
I have a multi- sheet Excel workbook and I need to develop a macro based control that, with a single click of a Button in a sheet named REPORT, will take me directly to the last empty cell in column A of a sheet named REGISTER in the same workbook.
View 2 Replies
View Related
Nov 24, 2009
I want is when Enter is pressed on Range Name =Match then, Goto Cell U3
To clearify what i need is when enter is pressed on any Single Cell belonging to the Range given the name "Match" then, Goto Cell U3...
View 9 Replies
View Related
Mar 3, 2009
Is it possible to have excel 2007 open a workbook, activate the first sheet "output" and activate the first empty cell in column A - ready for user input? i.e.
I want my user to open workbook "EHB Stock" and automatically the first empty cell in column A of worksheet "output" is activated and ready for input.
The rest of my code is:
View 2 Replies
View Related
Oct 22, 2008
I am trying to make an "intelligent" auto filter that with filter with increasing restriction until a certain criteria is met.
The list runs from A5:G20. In coloumn G is the number of hours associated with each event. And in A1 I have the percentage of items showing/whole list so it I have 15 rows on the list, and I filter so that only 5 are showing, cell a1=33%
How can I make a macro that will autofilter until the the a1=5%
Like having filter criter = equal or greater then 1 hour,
if a1 > 5%
Then criteria + 1 hour
If A1=<5%, then stop.
basically a seed criteria of 1 hour, adding 1 hour until the value in a1 = 5%
View 6 Replies
View Related
Jul 11, 2007
I am looking for a macro that will go to the next blank cell in the column starting at B3 and if none are found going to the next sheet(sheets are january-december). The twist is that I need it to change sheets when there is nothing in column A(which has dates and times in it) then go again to the next blank cell in the following sheet starting at B3.
View 10 Replies
View Related
Feb 19, 2009
I have a macro that runs when the user clicks on a button. I want it to run when a particular cell has data in it - after the user selects an item from a drop down. How can I make the macro trigger based on a cell being non-blank?
View 9 Replies
View Related
Jun 24, 2014
I have a worksheet that contains data but column E has blank cells. i want to automatically encode on the last blank cell in column E up to the last used row.
I am using the ff. code to select the last blank cell in column E:
Range("E1").End(xlDown).Offset(1, 0).Select
I am using the ff. code to select the last used row:
ActiveSheet.UsedRange.Rows.Select
but it doesn't work.
In my excel file, all i want to do is to encode "ECASE-UNUSABLE-UPD" in cell E61:1549 , wherein E61 = is the last blanck cell & E1549 = is the last used row.
View 1 Replies
View Related
Jan 23, 2010
I am try to write a bit of code which will find the non blank cells in column H (Range H4:H24) and when it finds a non blank cell make column C in that row the active cell and then run a macro. Once the macro as been run i would like it to look for the next non blank cell.
View 5 Replies
View Related
Mar 28, 2014
I extract data from a database and export it to excel, the data has A-E Columns.
Then I run a macro to perform calculations based on columns A-E,
The macro results in creating columns F - K. I have specified to run the macro on columns F-K.
Now in the future I would want to increase my database and add in more columns for example F-Hand this would directly effect my macro.
Is there a way to specify in the macro to conduct calculations that is "F-K" after "A-H" that is as soon as you hit a blank column/cell?
View 1 Replies
View Related
Jan 10, 2009
I have searched the forum a few times and haven't seen an exact example of what I am trying to do, so I hope this isn't a duplicate.
I am looking for a macro to copy a cell and autofill it down the column until it gets to a non-blank cell. When it reaches that cell it needs to then copy THAT cell down until it reaches another non-blank cell... this could happen just a couple times, a couple dozen times, or only the very first time.
So for example:
In cell B2 there is text "Data1"
In cell B13 there is text "Data2"
In cell B25 there is text "Data3"
I would like the macro to search column B to find "Data1", and then copy it down the column until it reaches B13, then copy "Data2" down until B25, where it would then copy "Data3" down until the end of the document. The location of the data in column B varies, and the number of cells with data in column B will vary as well.
View 9 Replies
View Related
Mar 15, 2007
How can I have my macro run in its cell and still allow the cell to be blank? Say I have a number, 0.99, in the cell and I want to delete it and leave it blank. I can either push "Backspace" or the delete key and it still leaves zeros.
If I push the space bar it stops the macro (which I do not want to happen) and leaves the cell blank because I added a space.
View 12 Replies
View Related
Jul 15, 2009
I am trying to write a macro that will do a bunch of stuff then go to the next blank cell in a particular column.
The rest of the code for the macro is irrelevant I just don't know how to code it to find the next blank cell in the column. It could be anywhere from cell A2 to A1000000. Basically I want the macro to select the cell that is next on the list to enter data into.
View 8 Replies
View Related
Mar 1, 2012
I need a VBA macro for filling the blank cells in whole column "D" with some conditions.This condition work for whole column.
ABCDCN
EA
Polymer
DE
MA
Polymer
Medium
CN
EA
Polymer
Fill the blank cell in D column with "Easy", if Column A is "CN" and column B is "EA"
Fill the blank cell in D column with "Medium", if column A is "DE" and column B is "MA".
After Run the macro:
i.e
ABCDCN
EA
Polymer
Easy
DE
MA
Polymer
Medium
CN
EA
Polymer
Easy
I was used "if" condition but I can't able to run.
View 2 Replies
View Related
Oct 29, 2013
I'm trying to record a macro that is using vlookups to get data from another data sheet, this data sheet will update each month - the old data moving back a column (so the new data is filled into the same column each time).
However, on the sheet where i am recording the macro, i need the data to fill in the next column each time.
I have recorded the below:
Sub Colourants()
'
' Colourants Macro
'
'
ActiveWindow.SmallScroll Down:=-30
Range("AK3").Select
[Code] .......
How do I get it so it doesn't record in cell 'AK' all the time but the next empty column each time it's run (however, it will always run from row 3).
View 1 Replies
View Related
Dec 10, 2013
I have a small challenge, where I am trying to fill blank cells with the data from the last populated cell above.
However, I need it to be able to automatically recognise when a manual entry has beed actioned down the column and recalculate for below that cell with the new data.
The data in the cell is selected from a drop down. I want it to populate all the cells below, until the next drop down is selected. And automatically repopulate them all when it is selected.
E.g. Cell C8 has the value "DATA" selected, and everything below is autofilled with "DATA", but when I select cell C12 with different drop down list value "VALUE", all the cells below stay as "DATA" because they are obviously no longer blank.
What I need if C9 - C11 to remain filled with 'DATA" and from C13 to auto fill with the newly selected value "VALUE".
Need this to happen for as many rows and data selections from the drop down as needed (endless).
I have used:
Code:
Sub FillEmpty() Application.ScreenUpdating = False Application.Calculation = xlManual Dim cell As Range For Each cell In Intersect(Selection, _ ActiveSheet.UsedRange) If Trim(cell) = "" And cell.Row > 1 Then cell.NumberFormat = cell.Offset(-1, 0).NumberFormat cell.Value = cell.Offset(-1, 0).Value End If Next cell Application.Calculation = xlAutomatic 'xlCalculationAutomatic Application.ScreenUpdating = False End Sub
which does the auto fill, but won't change the cells below once one of them has been updated.
Info:
Drop down list has 31 possible selections at the moment
Starts at Cell C8
Needs to be flexible enough to add an indeterminate number of rows, and additional items to the drop down selection.
View 1 Replies
View Related
Mar 25, 2014
I need a macro to go through one column until it hits a blank cell and stop... the criterea of the loop:
if cell = "Multi" then **Move to X tab** else **move to X2 tab**
View 1 Replies
View Related
May 30, 2008
Short and simple. What is the quickest, easiest & most efficient way to find the first blank cell within a column using VBA?
View 9 Replies
View Related
Oct 1, 2008
i have created a spreadsheet to simplify our work flow, I am stuck on what is probably the easiest of the commands.
basically have rows dedicated to specific codes and the colums represent values relating to each code, all codes have a different set of values, the attached example only has a few variables but the actual worksheet will have several hundred.
the idea is the user will input the code they wish to get details on in A2 and then press the command button and it will then show (as per the after sheet in the attachment) just the relevant information for that code, so filter the code in column A and hide the columns which hold no value.
where i am getting stuck is I am not sure the best way to proceed, is it best to create the macro button to do the filter and hide or is there a better way using vlookup and a pop up window asking for the relevantcode to be inputted to to retrive the information, again understand there will be hundreds of colums and hundreds of rows and the values may be 20 or 30 colums apart for some of the Codes so this simplification is really saving the user a lot of time.
View 7 Replies
View Related
Apr 17, 2008
Does anyone know how to use a macro to make a cell background blank if it is not orange or dark blue?
View 12 Replies
View Related
Jan 29, 2007
The cell is activated in a worksheet highlighting the name of another worksheet. What code do I use to have the macro recognize that name and goto that other worksheet?
View 3 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Oct 24, 2008
How do I use the GoTo so that I can Specify A line of Code to go to...
for example
View 5 Replies
View Related
