I want is when Enter is pressed on Range Name =Match then, Goto Cell U3
To clearify what i need is when enter is pressed on any Single Cell belonging to the Range given the name "Match" then, Goto Cell U3...
I need to be able to run a macro called "Daily_Fuel_Line_Save2" when the enter key is pressed in any cell in the range A10:F10, but I still need to be able to use the tab key between the individual cells and change values in this range before starting the macro.
I already have the following code on the sheet which I would also like to keep.
[Code] .....
I'm trying to get a macro to run in my worksheet anytime someone presses the Enter key. I've been trying to use Private Sub Worksheet_Change(ByVal Target As Range) and getting extremely frustrated. I’ve tried a bunch of things and nothing seems to work. This is my latest that doesn’t work.
View 5 Replies View RelatedI have a userform that contains a number of controls. When I press the enter / return key, I would like this to have the same effect as hitting the 'OK' button i.e. run some code. At the moment, hitting enter sets the focus on the next control in the tab order.
View 5 Replies View RelatedI have a userform with a textbox in it. Once you type what you want in the textbox, you click on one of two buttons - either Accept or Cancel. It would be much neater if the userform would close when the user hits the carriage return in the textbox. Anyone know how this can be achieved? Kjartan Auto Merged Post Until 24 Hrs Passes;Doh never mind folks, I figured it out...
Private Sub Userform1Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Userform1.Exit
End Sub
When I enter a value into a cell and press "ENTER" or press the Right Arrow the whole spread shifts to the left instead of just confirming the entry of the cell and moving one cell(column) to the right.
This is a spreadsheet that I have used for over 3 years so something has changed in one of the settings.
I have Office 2003.
Based on the value (month) picked from a dropdown list, I want to go to the specific range of that month in the same worksheet.
Attached you can find a sample sheet. Map1.xlsx
I have a spreadsheet that contains data from sales being made in various locations (sheet 1). The date the sale was made is in column A, and the location is in column AZ. I may have from 0 to 12 sales at that location on the same date. I am building a report in another sheet (sheet 2) that counts the number of sales for each date and displays that number in a cell in row 3. Above row 3, I want a formula that will reference the location (AZ sheet 1) and display that into my cell above row 3 in sheet 2. Each column in row 1 sheet 2 will have new date.
View 5 Replies View RelatedIn the attached sheet, there is a range with lots of entered data (a small section of the total) where I would like to enter into all of the blank cells the value 99999.
I have been selecting the range as follows:
When i press say a command button " Add Repair Information" i want the User to Enter the serial number which i have given it a range called SerialN from the excel sheet and enter a repair action. Is there a function in Excel which will allow me to search the Serial Number and allow me to put the Repair action across in the cell on the same line?
View 5 Replies View RelatedI want to find the cell location of the largest value in a specific column.
for example: column C has 5 rows of different values : 5, 12, 4, 7,9 and I want to find the cell reference of the largest number which is 12.
I know that I need to use "Large" function in order to find the largest number, but what do I have to do in order to find the cell location of it?
I want to write a simple macro that does the following.
If cell A1 = YES goto cell A1000
If cell A1 = NO goto cell B1000
If cell A1 = MAYBE goto cell C1000
I will have the 3 options available via a combobox
i have this:
Sheets("Sheet2").Application.Goto Reference:="R1C1"
it is supposed to go to cell A1 in Sheet2.
but it doesn't go to sheet 2?
I am trying to display a message box for the user if there is "agency" in cell o8 but nothing in p8... I tried the following code but it doesnt work..
If Range("o8").Value = "Agency" And Range("p8").Value = "" Then
MsgBox "Please provide name of agency in cell p8"
Sheet9.Shapes("cross").Visible = True
Else
I am trying to click one 1 cell, which will automatically use a lookup of the cell values and find the correct sheet to go to.
All of this using VBA.
I have a spreadsheet where I had a new column on a daily basis. I am trying to create a macro to automate some parts of this. I would like to select the next blank cell on row 1. So in this instance, cell M1, however the following day it would be N1. This is the part I am unsure of how to do. After this I will be doing a vlookup to add the new values, which I should be able to sort out no problem.
I have seen people using COUNT and OFFSET to select the last cell +1, however I am unsure how to link to two together.
I have a multi- sheet Excel workbook and I need to develop a macro based control that, with a single click of a Button in a sheet named REPORT, will take me directly to the last empty cell in column A of a sheet named REGISTER in the same workbook.
View 2 Replies View RelatedI have designed a workbook for a reservation planner which lists all production reservations over the whole year. Because of the limitations in columns, I have had to split up the workbook into 3 worksheets. I have a quick links section (52 command buttons) which redirects the user via macro to the specific week they require....
Sub Week12()
Application.Goto Reference:="R6C256"
Application.Goto Reference:="R6C118"
End Sub
The first split is at week 17 which is on sheet2. I am working far too hard at the moment and I cannot figure how to go to the sheet in addition to the cell references as above.
Is it possible to have excel 2007 open a workbook, activate the first sheet "output" and activate the first empty cell in column A - ready for user input? i.e.
I want my user to open workbook "EHB Stock" and automatically the first empty cell in column A of worksheet "output" is activated and ready for input.
The rest of my code is:
As above can anyone tell me how to enter a formulaArray to a range using VBA.
EG
{=IF(A5>0,SUM(B5:AT5*$B$2:$AT$2),"")}
To range AU5:AU500
how I can modify the below code so that it populates the timestamp in the same row in Column E if Column A is populated with data...
Example:
Cell A1 is populated then populate Cell E1 with timestamp
if
Cell A4 is populated then populate Cell E4 with timestamp
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Target.Address = "$A$2" Then
With Sheet1.Range("E2")
.Value = Time
End With
End If
End Sub
In Q3 I have a formula which determines the "next" date from today. In P3 I need to enter a formula which will return the value of the range (P6:P37) which is in the same row but different column as the value calculated in Q3.
View 1 Replies View RelatedSub test()
Dim rng, dest, c As Range
Dim result As String
Worksheets("sheet1").Activate
Set rng = Range([a1], [a1].End(xlDown))
Set dest = Range("d1")
result = ""
For Each c In rng
result = result & " " & c
Next
MsgBox result
dest = result
End Sub
the penultimate code statement "dest=result" does notwork the value of "result" is not entered in "dest" though no error comes up if I use "dest.value=result" it gives error "object required" If I use "range("d1")=result" it works.what is the theoretical mistake.
how can I go about this?
View 9 Replies View RelatedI would like to detect when the user uses the "DELETE" key and would like to run a macro at the same time.
how to detect it and run a macro in VBA.
How could I detect if the CTRL (Control) or ALT key has been pressed. I want to execute a macro when either one is press over a given cell.
View 3 Replies View RelatedI have Sheet2 containing Supplier data in 2 columns - SupplierTAxCode and SupplierName (unsorted)
Sheet1 contains the Expenses section.
In Sheet1, column E6 to E1000, after inputting each SupplierTAxCode and pressing the RIGHT ARROW key, I would like to automatically get the SupplierName in column F6 to F1000 - from the corresponding data in Sheet2
In the event that the input in any of the cells in E6 to E1000 does not exist in SupplierTAxCode in Sheet2, would it be possible at the same time, to change the background color of the adjacent cell (SupplierName) in column F6 to F1000 at the same time - as a reminder to add those to the Supplier data in Sheet2 at a later date.
I could use Index Match and Conditional Formatting, but am concerned about the file sizes.
Onkey is used to make something when a key is pressed. There is a instruction to make something when any key is pressed?
View 4 Replies View RelatedI took an Excel course in college but am a bit rusty. I have a customer database that I created and I would like to see certain things after entering a date range that I specify. I uploaded a small excel sheet to show my database and what I'm looking to do. Basically I would like to enter a date range and see these answers:
Total Orders in that date range
Total unique orders in that date range
List of customers (name included) who ordered more than once in that date range
The only columns of data I need to use are: firstname, lastname and orderdate.
I'm trying to enter a series of formulas referencing the first cell of each row.
With Range("A40")
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 1).FormulaR1C1 = "= COUNTIF(Details!R2C2:R65536C2,RC1)"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 2).FormulaArray = "=RC[-1]-SUM((Details!R2C2:R65536C2=RC[-2])*('Details'!R2C11:R65536C11=RC1))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 4).FormulaArray = "=SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C4:R65536C4>TODAY()-7))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 5).FormulaArray = "=RC[-1]-SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C11:R65536C11=RC1)*(Details!R2C4:R65536C4>TODAY()-7))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 7).FormulaArray = "=SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C4:R65536C4>TODAY()-30))"
Range(.Cells(1, 1), .End(xlDown)).Offset(0, 8).FormulaArray = "=RC[-1]-SUM((Details!R2C2:R65536C2=RC1)*(Details!R2C11:R65536C11=RC1)*(Details!R2C4:R65536C4>TODAY()-30))"
End With
While this code works for the first formula, the following 4 are arrays, and for some reason, will only reference the first A40 cell.