VBA Code To Move Or Copy Data
May 8, 2009
I would like to copy or move data from one worksheet to another automatically. I have one sheet (Data) with multiple pieces of data for specific individuals. I have several other sheets titled their last name. Can data for example from John Doe be copied to the sheet Doe and data for John Smith be copied to sheet Smith. In essence I would like the sheet to paste everything below John Doe to Doe's sheet and recognize the next name and past that into the next sheet and so on. It may be several different codes, Im ok with that.
One other item all cells do not have data I do need the blank cells copied as well at to not lose the formatting. There is also a blank 2 rows between each person.
If you need a copy of what the data looks like I can send it.
View 9 Replies
ADVERTISEMENT
Sep 8, 2006
I have to issue template workbooks to people for budgeting purposes.
Within the workbooks are various numbers of worksheets pre -formatted and ready for these people to enter data.
Some of the data in the worksheets is important to them as individuals but not to me so I have a series of macros that lift the information from the worksheets and put it into a worksheet more specific to me.
Because the users are on the whole not that good with Excel I have put in easy to use look up tables and various proctections to stop them adding or deleting rows or columns as this plays havoc with my macros.
There is one thing I have "so far" been unable to do and I wondered if anyone could help.
Is there a macro that I could put somewhere in the workbook which would detect when someone tried to cut and paste and would either put up a message box or stop them doing this?
The reason being they are cutting from one row to another and this is messing up the calculations which are protected.
Is there also a way to stop them changing the name on the sheet tab in the smae way?
View 9 Replies
View Related
Oct 12, 2011
coding that will select whatever data is entered in say Coulmn D & then copy it to the botom of another list in Column F.
The amount of rows with data in any of the colums may vary.
View 8 Replies
View Related
Mar 17, 2012
I need a code that will allow me to move data from a worksheet to a worksheet from which I came from. e.g. worksheet "Sheet 6" opens "Sheet 10", then after filling data in "Sheet 10" I need to move this data back to "Sheet 6" in the cells in range "F12 to F56". Please note that the data in "Sheet 10" is in the same range as in "Sheet 6"
View 1 Replies
View Related
Mar 23, 2014
Here's a sample sheet.
I receive spreadsheets with data sorted by column. There might be 500-600 records in approximately 1-8 categories, 14 columns wide. One column is used for the category. I would like to copy or move the data in each category to a new sheet within the file, so I can work with each category separately. I do this manually now, and have to do it multiple times for each file, as the data changes daily.
The category names are rarely the same from one batch to the next, so the routine will have to look at the categories and understand their names in order to put the data on a new sheet. Category names are alpha-numeric, like RA114, RC109.
This seems like a VB app, but I don't know VB! Is there a way to do this without VB? If not, is there a well-documented VB template or utility I might use to modify?
View 4 Replies
View Related
Aug 11, 2014
I have a large spreadsheet which I have extracted the data I need, but I am now having a problem tiding it up.
To simplify. I have 2 columns, both containing data formatted as text, each column has some data, but on different rows.
I need to merge the 2 columns without overwriting the data on the second column, with blank data from the first column, and without the column shrinking or growing.
Here is a section of my spreadsheet that needs merging : Excel-1.PNG
I have tried copy > Paste Special > Skip Blanks, but it just copies the column to the other - no merging.
View 1 Replies
View Related
Mar 2, 2013
I publish a green building mag, and we run an enquiry system for readers on our website. This is the link: [URL] .......
The idea is that readers tell us some info about themselves, including what types of products/services they'd like to receive information about, and we pass their details on to advertisers offering those products/services.
When someone fills out a form, we get data in Excel on their enquiry. It's all in one row - name, contact details, and then the products/services they've enquired about are included in one cell, separated by commas.
So for instance, suppose a listing currently came in as follows (column headings in brackets:
(name) Joe Soap / (job title) Architect / (organisation) Joe Soap Architecture / (address) 123 Soap St, Soapville / (enquiries) insulation, solar panels, windows
Essentially I want it to run like this:
(name) Joe Soap / (job title) Architect / (organisation) Joe Soap Architecture / (address) 123 Soap St, Soapville / (enquiries) insulation
(name) Joe Soap / (job title) Architect / (organisation) Joe Soap Architecture / (address) 123 Soap St, Soapville / (enquiries) solar panels
(name) Joe Soap / (job title) Architect / (organisation) Joe Soap Architecture / (address) 123 Soap St, Soapville / (enquiries) windows
View 14 Replies
View Related
Jun 24, 2014
I need to do VBA coding. Got 12 Sheets for 12 month of Sales. Every Sheets are in same Header Format.
For Column R (Status), there's Filter Data "TRUE" and "FALSE". I have to move/copy "TRUE" item into Sheet Aging 2014.
I manage to transfer using only one Sheets using Advanced Filter VBA, failed with other Sheet.
I attached the file : Sales 2014.xlsx‎
View 5 Replies
View Related
Apr 17, 2014
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
View 5 Replies
View Related
Mar 14, 2014
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
View 2 Replies
View Related
Mar 24, 2014
I've not had much experience with VBA code, other than recording macros and editing them a little. What i would like to do is code a macro to copy the data (text only) of a whole worksheet into a blank worksheet in a different workbook, effectively allowing the user to "upload" the data to a master workbook.
The user will complete data entry into a daily template worksheet containing all formulae to obtain necessary daily data. I would like them to then be able to click a button that runs a macro copying the text data from the daily template to a monthly workbook. I have no problem recording this in a macro and the code for that (no doubt there is a more efficient way) is:
[Code] .....
The monthly workbook will contain 31 sheets (named 1,2,3...31) for the days, and each month will have it's own workbook (named Jan, Feb, Mar...Dec).
The key thing I need is using cells within the daily workbook to determine the month and day used by VBA for the filename and worksheet respectively.
Cell B5 contains the day (eg. 1) and C5 the month (e.g. Jan)
View 8 Replies
View Related
May 16, 2014
My vba code to copy row A110 of "Mod" worksheet to A9 in Table A of "Email Data" worksheet using some logic like - in Mod worksheet it searches for data i.e. "COUNT(DISTINCTM.TRANS_ID)" if found then it searches for "row selected" and it searches for data between the two . And then it pastes 34864 to A9 of Email Data worksheet . I have written code for this but it doesn't works.
Also i need vba code similarly for searching "CAP_ACTV_LN_SEQ" and then the values inside it to be pasted i.e. row 128 and row 129 in Mod worksheet to be pasted in table e in Email Data worksheet . Remember there are 2 rows but there can be any number of row anytime.
Also the vba code for "NULLPOINTEREXCEPTION'" is there in the sheet which is working fine. It can be used for your reference.
Button for Vba code to work is present in "Email Data" worksheet.
code for "COUNT(DISTINCTM.TRANS_ID)" given below also excel sheet attached : Worksheet .xlsm
View 6 Replies
View Related
Jan 26, 2008
I have two workbooks: Workbook1 has two sheets – Cash Register and Suppliers; and Workbook2 has one sheet – Clients. The users of Workbook2 do not have access to Workbook1, and information entered in Workbook2 is required (and has to be manually re-entered) in Workbook1.
I tried IFs and VLOOKUPs to pull the data, but due to the large number of cells, the workbook is awfully slow – taking a very long time to save (even with Automatic Calculation/Recalculate before save turned off).
I am using Excel 2007.
This is what I am trying to achieve:
When a user enters an ID number, which begins with either “S” (e.g., SB-00010) or “P” (e.g., PADA-012-034-0567), in column E of Cash Register:
(1)
If that ID number begins with “S”, I want the code to look up that ID number in column A of Suppliers and copy the corresponding cell from each of the following columns:
B
C
D
E
F
G...........
View 14 Replies
View Related
Apr 7, 2009
Attached is a spreadsheet that does exactly what I need it to do but I know that the code can be written better. Perhaps some experts can clue me in to how I could improve.
There is a button on the sheet Mandatory Training that looks at the sheet CS CM and finds certain numbers, when it does it makes them red and copies them to the Mandatory Training sheet. If other lines are added to CS CM that have the same numbers and the button is clicked again, only the new entries are made red and copied to Mandatory Training.
View 10 Replies
View Related
Apr 24, 2014
I am looking for VBA which will complete my below task.
copy data from active worksheet to closed workbook.Active sheet data should copy below old data of closed workbook.data contain in A to K column of active worksheet.clear copied dataIf I moved both file any folder or drive, path should change automatically. ( something like fpath = current workbook path clworkbook= fpath & closedwbk.xls).
View 6 Replies
View Related
Jun 16, 2014
I'm trying to write code in Airport1.xlsm to allow me to create a macro to automatically copy data from Airport-Data.xlsm and reformat it to what is needed in Airport1.xlsm.
Basically I need the code to take each airport in column A of Airport-Data and where there is a non-zero value in rows column C to G I need it to clear the appropriate column in Airport1.xlsm and add a 1 to the appropriate box.
I got stuck thinking about the nested For Next Cell in range procedure and how to execute it with a search for the correct row in Airport1.xlsm.
View 14 Replies
View Related
Jan 25, 2012
I am using the following code to copy data from multiple workbooks in a folder to one workbook.
Code:
Sub copy_files()
Dim wkb1, wkb2, wkb3 As Workbook
Dim i, lastrow As Integer
[Code]....
What changes are required in the above code to paste the data in different sheets on one workbook.
View 2 Replies
View Related
May 12, 2008
I am building a large macro to filter/manipulate/format/organize data pasted into a Data Dump tab.
I am a VBA novice, and I recycled some code for a portion of the macro from infomation found on this board. I just discovered that my copy/paste section is ignoring the last row of data, which is a problem ....
View 9 Replies
View Related
Mar 7, 2014
I could get a code to move a row from one area of a worksheet to another area on the same worksheet once a cell is tagged "Paid" via a refreshed macro. The updating data table starts on Row 3 for columns "B" - "R." The paid table starts on row 56 where column "B" always has a date in its cell.
View 7 Replies
View Related
Apr 1, 2014
I've been trying to modify the following code to find the value "Module Index" in column A. I then need the code to save the row number that the value was found in and copy a range from ("A2:V row number")
I keep getting an "object required" error on the following code line
Set intFindrow = wbTargetBook.Sheets(strName).Range("A:A").Find(What:="Module Index", LookIn:=xlValues)
[Code] .....
View 2 Replies
View Related
Apr 8, 2009
If possible could someone please tell me why the below code is not calling the normal.doc macro "testy" and any solutions.
The code opens a new document, pastes the text from the clipboard and then fails to run the wanted macro.
View 6 Replies
View Related
May 21, 2009
I have two sheets - sheet1 and sheet2. Everytime i run a macro in the sheet1and manually copy the rows from sheet1 {starting (A2:AI2)} and paste as values it in the sheet2 {starting (A2:AI2)}.
Then I ll delete the available datas in the sheet1 and will run a macro for different customer.
Again I need to repeat the same action (manually copy and paste the datas to sheet2) without replacing the existing data in the sheet1.
In simple I require a macro code where it copy the available information in sheet1 and paste it as values in the sheet2 without replacing the existing one.
View 14 Replies
View Related
Sep 26, 2013
I have a workbook with 10 sheets.
Each sheets has data starting row 14 and column B with row 13 being column Headers.
I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets
Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.
then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.
View 8 Replies
View Related
Mar 28, 2014
I created a outstanding task worksheet in excel and I would like to move the completed jobs from this sheet to the second worksheet titled 'Completed Tasks'. The first worksheet is called 'Outstanding Tasks'.
I came up with a code to do this (see below). As you can see when I type "Y" into column G it moves the row into the second worksheet. It does this; however it puts it to the bottom of the table on the second worksheet where I would like it to be at the top. I also would like it to delete the row once it has moved it does this but then deletes the other row of information above it leaving blank rows on either side.
I simply want a code that moves the row of information to the second worksheet when I type Y into column G and then delete the row without messing with other information around it.
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim rng As Range
Set rng = Target.Parent.Range("G5:G1000")
If Target.Count > 1 Then Exit Sub
If Intersect(Target, rng) Is Nothing Then Exit Sub
Select Case Target.Text
Case "Y"
Target.EntireRow.Cut Sheets("Completed Tasks").Cells(Rows.Count, "A").End(xlUp).Offset(1)
Selection.ListObject.ListRows(1).Delete
End Select
End Sub
View 1 Replies
View Related
Jan 15, 2007
the code to get my cursor to move down 1 row or cell without it actually referencing the chosen cell.
View 9 Replies
View Related
Feb 15, 2007
Is there a code to make the Cursor Movement direction to be set to move Left ?
View 2 Replies
View Related
Mar 17, 2014
My workbook stores data related to items that are all tracked by barcodes. Im using the following code (as part of a larger set of code) to copy data from rows 6 on in column D, E & G to K from one workbook to another. The data in F (Item Names) is found using a formula, by matching the barcode data in the corresponding G cell (on the same row) to another sheet (where the barcodes and Item names are stored). When the data has finished copying over and EnableEvents gets turned back on the F column mostly automatically fills itself in from the formula.
The issue I have however is in certain circumstances there are some items that either dont have a barcode, or the barcode is missing. In this case the user types "none" (not case sensitive), which opens a userform allowing the user to type in an Item name that gets entered into the F cell, overwriting the formula. I need to copy this data over separately to the new workbook. Im looking for code to find these records from row 6 on (either by searching for rows where G equals "none", or rows where F has no formula, and then copy the data in F over to the other workbook to the corresponding row number but offset by the number of records already present in the active workbook (currently being calculated by wbReturnDataLastRow).
[Code] .....
wb is the ActiveWorkbook that the data is being copied to
mybook is the workbook that the data is being copied from
View 6 Replies
View Related
Mar 3, 2008
I have a workbook ("CaTr") Sheet1 has data ranging ("B2:I41").
There are about 30 cells values (scattered) which needs to be copied in a workbook "CA_Log" in one single next available row .
As soon as the CaTr.sheet1 is filled I want the operator to click a button to trigger this event. Then the sheet1 in workbook CaTr should be saved as "G3" cell value.
View 14 Replies
View Related
Mar 24, 2009
This is probably far easier then I am making it but I need to take the information that is in a textbox created through the control toolbox and copy and paste that information into a cell on different tab in the workbook. I have tried the infamous google and haven't been able to find much. The excel books that I have don't really touch on the control toolbox functions.
View 2 Replies
View Related
Sep 3, 2013
I have a list of file names in Excel and I need to move the files from one folder into another. Sometimes I'm having to find and move hundreds of files into different destination folders, hence why I would like a macro. My spreadsheet will be something like:
Column A
Column B
Column C
Row 1
File name
[Code]...
View 3 Replies
View Related
