Code To Copy, Paste Without Replacing The Existing Data
May 21, 2009
I have two sheets - sheet1 and sheet2. Everytime i run a macro in the sheet1and manually copy the rows from sheet1 {starting (A2:AI2)} and paste as values it in the sheet2 {starting (A2:AI2)}.
Then I ll delete the available datas in the sheet1 and will run a macro for different customer.
Again I need to repeat the same action (manually copy and paste the datas to sheet2) without replacing the existing data in the sheet1.
In simple I require a macro code where it copy the available information in sheet1 and paste it as values in the sheet2 without replacing the existing one.
View 14 Replies
ADVERTISEMENT
Jul 11, 2007
I use for another template and it works fine. Only change I would like to make is the column headers starts in Row 4. Col B. Some how this is not working for me.
Sub ITD_REV()
Application.ScreenUpdating = False
With Sheets("Data").Rows("1:1")
Set c = .Find("CONTRACT #", LookIn:=xlValues)
If Not c Is Nothing Then
FirstAddress = c.Address
Do
c.EntireColumn.Copy
Sheets("Test1").Select
Range("B3").Insert shift:=xlRight
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address FirstAddress
End If
End With
End Sub
Again...incase what I said does not make sense: I want to copy certain columns with fixed header names, e.g. "CONTRACT #" into another sheet name "Test1" and paste starting into cell B3. Another column would be "Contract Name" and so on. Also, these col header names may not be in order. In "Data" sheet, col header names starts in row 4.
View 9 Replies
View Related
Nov 25, 2012
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
View 2 Replies
View Related
Jun 1, 2013
I have the below code that copies and pastes from one part of a spreadsheet to another. I need to modify it so that it does not over-write the information where it pastes to, but rather adds the new information to the lines below the data that is already there.
Private Sub PlaceData_Click()
Range("A7:C23").Select
Selection.Copy
Range("G4").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
[code]....
View 3 Replies
View Related
May 2, 2007
need to add same data to every other existing cell in the column, but not replace the data already in it, but to add to it. I've tried to google the answer and look here, but I probably use bad search terms.
For example, I need to add "QW" after each of these lines:
data1432
data9292
data3933
data3939
so it would look like this:
data1432QW
data9292QW
data3933QW
data3939QW
I have a few thousand rows of data, so wouldn't rather not do it manually cell by cell by typing :-)
View 9 Replies
View Related
Nov 28, 2011
I have 2 opened workbooks. Call them BookCopy.xls and BookPaste.xls.
In BookCopy.xls I have filtered data which I want to copy ("shtCopy") and insert into a particular row in sheet ("shtPaste") in BookPaste.xls.
"shtPaste" already has data in it. Hence when I paste the data in, I don't want the existing data to be overwritten.
View 9 Replies
View Related
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
Mar 26, 2012
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
View 4 Replies
View Related
Jan 24, 2014
how do i go about creating a macro to copy a range in sheet 1 in workbook A and paste that to a new tab(the last one) in the existing workbook B. i would like the tab to be renamed based on a cell value. preferably workbook B doesnt have to be open, and the save and close it
View 6 Replies
View Related
May 12, 2008
I am building a large macro to filter/manipulate/format/organize data pasted into a Data Dump tab.
I am a VBA novice, and I recycled some code for a portion of the macro from infomation found on this board. I just discovered that my copy/paste section is ignoring the last row of data, which is a problem ....
View 9 Replies
View Related
Jan 6, 2014
I'm trying to simplify a spreadsheet i've been given by defining names for certain values. I'm using Excel 2013. Is there any way to have all of the newly defined names I've created for cells automatically be inserted into all of the formulas that exist in the spreadsheet?
Example.
Old formula in one sheet of a workbook looks up a cell in another sheet with the value of ='sheet1!A1
I've given the value of cell A1 in Sheet1 a name of dgwd.
How do I get every formula in the workbook that references 'sheet1!A1 to change the value within that formula to dgwd?
View 4 Replies
View Related
Aug 1, 2014
I have many rows of data 6 columns wide. I want to be able to enter data into a specific section, then run a macro to "cut-and-paste" that data onto the bottom of my existing data (with one empty spacer row between the new and existing data)
Here's what I have so far:
[Code] ....
Basically the part I need working on is changing [ Range("A101:F130").Value ] to be dynamic. For the code to determine the last row of data, move 2 rows down, and paste the block there.
View 6 Replies
View Related
Aug 8, 2012
I inherited a spreadsheet to manage that is linked to a SharePoint table.
It is trying to populate a date that a certain "Tier" is selected (1, 2, 3, or 4).
It works great if I manually type in the tiers, but does not run on existing data (about 400 records) or lines that are updated and new via the SharePoint list.
How can I have this run on all of the existing lines and anything added or changed in the future from the list?
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("AD2:AD10000")) Is Nothing Then
Application.EnableEvents = False
[Code] ....
View 9 Replies
View Related
Feb 5, 2014
I have used a formula to achieve this before which seemed to work although now it seems to be replacing other data already in the worksheet so I am unsure of how to fix, thinking I should just start again.
The file in question is a tracker of activities, Column A (sheet1) is the Status and once the status is "Closed" I need to run a macro that copies all closed activities to Sheet5 at the bottom of previous closed activities. Once this is done I already have a macro to delete all "closed" activities from Sheet1 meaning that it is vital the new closed activities stack onto the bottom of previous closed activities.
The Column Headers start on Row 11 with activities running from Column 12.
View 1 Replies
View Related
Nov 1, 2009
I have two files and need to copy the information from columns B,C,F,H rows 5 true 29, and past it in the other file in Columns B,D,G,J; rows 3 true 35.
The code that I have works fine, but have one problem - it past the info in the rows starting from 37 instead from row 3. Here is where I need your help. The code is triggered when the condition Arr ( arrived) is chosen in the column AH ( file Delivery Status) and then the specific warehouse is chosen in the column AI. To make it easy I have left only one warehouse as a choice.
Attached you can find sample files ( I have delete the info from the heading cells as it was in another lenguage)
View 14 Replies
View Related
Nov 9, 2009
I need a little look on a Copy Paste Code, as bellow:
View 3 Replies
View Related
Dec 4, 2009
I created this spreadsheet a few montsh ago to help with forecasting for my companies products. The tabs of interest are the HIST vs FORECAST, FORECAST TOOLKIT, and the FORECAST TABLE tab – now the FORECAST TABLE tab is always hidden and if you unhide it then it will rehide itself once one of the macro’s is run. I set it that way to prevent people accidently making adjustments to the forecast data.
The way the sheet is supposed to run is that when you are on the hist vs forecast page then you can click one of the grey buttons on the right which will then graph the numbers for the relevant product on the toolkit page – so far so good, this bit all works fine, there are separate macro’s for this each named after the product they control.
Then once you are on the toolkit you can play about with the numbers until you come up with a 6 month forecast you are happy with which will be on the 6 cell line in the bottom right were it says “ IMPORT”. You can then click on the “IMPORT” button which will then copy and paste it back into the forecast table under the relevant setting – the macro for this is called IMPORT2 and it works off a “product” range and a “ date” range – again this pretty much works as intended.
Sub IMPORT2()
Dim nDate, nProd
With Sheets("Forecast Toolkit")
nDate = Application.Match(.Range("O31"), Range("Dates")) + Range("Dates")(1).Row - 1
nProd = Application.Match(.Range("I3"), Range("Products")) + Range("Dates")(1).Column...........................
View 5 Replies
View Related
Jan 11, 2012
I've already found a TON of threads about this process but nothing that matches specifically what I'm trying to do.
I have a spreadsheet that I'm using to auto fill other tabs with data that only matches specific criteria. Here's what I'm looking to do:
Columns I, J, K, and L may be marked as either Y or N (or blank). I have different sheets that require 1, 2, 3, or 4 of those columns to match Y. For example, on sheet 2 I want to copy the entire row if there's a "Y" match on column I and J. On sheet 3 I want to match "Y" against, I, J, and K. Sheet 4 I need to match only L, etc.
I need the data copied into the existing sheets to start on row 7. I have other data on rows 1-6 that cannot be moved.
I'm running Excel 2007.
View 5 Replies
View Related
Oct 23, 2008
Is it possible to use a string to replace code we use repeatdly?
I know that in C it is possible doing this by using what is called a MACRO
For example, replace: ....
View 3 Replies
View Related
May 12, 2008
I'm using code that SHG provided for me here; http://www.excelforum.com/excel-programming/630464-sheet-macro-for-preventing-paste-not-working.html
It worked great in the first workbook I set up but I just set up a new workbook and it's not doing the same thing. For example, it allows me to copy items from column A which have 1 type of validation (restriction on text) to another column which has a formula validation.
It still won't allow me to paste from outside a validated range to inside but I need to prevent people from screwing up the validation between columns.
View 13 Replies
View Related
Mar 8, 2013
I have the following bit of VBA code which copies a particular cell and pastes it in the next available cell in column "AD", but I need to paste it as a value. How do I incorporate this into the code?
Sub copypaste()
Worksheets("USD IR Swap 10 Yr").Range("L5").Copy _
Destination:=Worksheets("USD IR Swap 10 Yr").Cells(Worksheets("USD IR Swap 10 Yr")
.Rows.Count, "AD").End(xlUp).Offset(1, 0)
End Sub
View 5 Replies
View Related
Mar 14, 2013
I am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
View 3 Replies
View Related
Apr 14, 2013
I have a shape called "Company Logo". Code to copy the shape from sheet 1 and paste to sheet 2?
(I tried macro record but had trouble when I pasted it into another macro).
View 4 Replies
View Related
Sep 18, 2007
I want to automate the transferring of specific pieces of data from one spreadsheet into another spreadsheet. There are many project spreadsheets that all feed into a resource plan spreadsheet showing every employee, what projects each of them are on, and how many hours they are spending on each project for the quarter.
Now what I would like to do is to automate this process of feeding the data from the many project spreadsheets into the resource plan spreadsheet. With transferring the specific data from the one to the other. Basically I need it so that excel looks at the project spreadsheet copies the name of the employee and the hours they have worked each week for the quarter and paste It into the big resource plan. What I am finding tricky is knowing how to make it automatically paste into the right area as in copy an employee and paste the details in the same employees cells in the other spreadsheet.
View 2 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Apr 26, 2014
I have 4-5 worksheets (sheet1,sheet2,etc) on a workbook. All of the rows except for the ones that are filled in are currently HIDDEN.
I have one worksheet called "Add record" which has a VBA code that adds a record to any of these sheets.
When it does this I want it to recognise when pasting the new record into any fo the sheets.. IF the row is hidden, the sheet needs to reveal that row.
I'm desperate trying to get this to work!!
Here is the code I have so far! This is a command button macro used in the "Add Record Sheet" I have FOUR different versions of this code. Each one adds the data to a specific sheet.
[Code] .....
View 1 Replies
View Related
Apr 4, 2009
The code opens a varying workbook with the same format as the source workbook and copies specific columns into the source workbook.
It is currently taking about 20seconds to run.
The worksheets are protected and have merged cells hence the call TestMe line.
View 13 Replies
View Related
Jan 25, 2010
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
View 4 Replies
View Related
Apr 13, 2012
I have this code that copy/pastes a range from another sheet for every nth row. In the code I have pasted cells I need to merge the cell with the cell to the right and format it. I thought I was doing ok but the code keeps returning an error (run-time 1004) and I don't know the solution, it is beyond my level of VBA.
Code:
Sub test()
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim lngRowCounter As Long
Dim newRowCounter As Long
[Code] ...
The code in red is the problem and I have commented it out so it can run, but I need it to merge and format. I don't know how to address range/cells in column B and C together (they are the two cells I wish to merge and format).
View 2 Replies
View Related
Feb 22, 2007
1. Alphabetize the worksheets that have a red tab color. The number of worksheets with a red tab color will vary from time to time.
2. All worksheets with a red tab color are formatted the same. I would like to copy the same range of cells (AP5:BP9) on all n number of worksheets with a red tab color to a worksheet labeled "Posting". Also, since AP5:BP9 are cells with formulas and formatting, the ranges need to be copied with formats and value and number formats. The first copied range needs to be on line 8 on the Posting worksheet, the second range to start on line 15, etc.
3. Last, but not really last, I would like to start the code with deleting whatever is currently on the Posting worksheet starting at line 8.
I have attached a small sample. The sample does not reference the same range as above on the worksheets with a red tab color, nor does it contain the formulas and formatting.
View 3 Replies
View Related
