I've been trying to modify the following code to find the value "Module Index" in column A. I then need the code to save the row number that the value was found in and copy a range from ("A2:V row number")
I keep getting an "object required" error on the following code line
Set intFindrow = wbTargetBook.Sheets(strName).Range("A:A").Find(What:="Module Index", LookIn:=xlValues)
[Code] .....
I have a spreadsheet where a date is entered in column A with data in B-F. I am trying to write code to look in column A for a specific date and enter additional data into columns G-L on the same row. It needs to be able to skip the rows that are blank. So I have the dates of 12/1, 12/2 and 12/3 in column A rows 1,2 and 3 and I want to enter data for 12/2 on row 2 skipping the blank cells in row 1 for 12/1. Here is the code I have below.
VB:
Private Sub CBSecure_Click()
Dim my_name As String
Dim r As Variant
Dim l As Long
sFind = DockDoorCal.Value
If Trim(sFind) = "" Then Exit Sub
[Code]....
I am going to explain the issue with a photo linked below
Capture2 | Flickr - Photo Sharing!
Basically i want to match data from column one with data from column 3 if true then copy the data in column 2 to columns 4 in the same match row.
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. And I have turned Events and ScreenUpdating on.
I would also like to note that it won't allow me to perform actions like unhide sheets or unprotect them. The code has not been changed either so what has happened to disable all functionality.
[URL] .....
I have been working on this application for the past couple weeks and I have this module of code that copy's a worksheet into a new workbook and changes everything into values. However I have added buttons onto this sheet and after running the code again it froze the program, in which I had to manually end. It gave an error afterwards however I don't remember what it said. Now everything I try to run or step through it, nothing happens. I have turned Events and ScreenUpdating on.
View 2 Replies View RelatedExcel 2007, Windows XP Pro
Dim strLoan As String
Dim longCat As Long
Dim rHere As Range
Range("A1").Select
[Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
I was using this code in a sheet that contained combo boxes and it worked great. When I redone the sheet a used data validation instead of CB it wold error out.
Code:
Sub savee()
Range("A4:J22").Select
For Each Cell In Selection
If Not Cell.HasFormula Then
Cell.Value = UCase(Cell.Value)
End If
Next Cell
Range("h4").Select
ActiveWorkbook.Save
End Sub
I have this macro below and would like the code changed to find the "Customer Number" column by name rather than by column B. Note that the "Customer Number" column will always be somewhere in row 1.
View 12 Replies View RelatedI am trying to display a message box for the user if there is "agency" in cell o8 but nothing in p8... I tried the following code but it doesnt work..
If Range("o8").Value = "Agency" And Range("p8").Value = "" Then
MsgBox "Please provide name of agency in cell p8"
Sheet9.Shapes("cross").Visible = True
Else
dear friends when i am enter data manually this macro work fine.but same data I'm copy & paste macro not working.pls help me..
Sub REQD_KILOS()
Dim c As Range, MyString As String
Application.ScreenUpdating = False
For Each c In Range("J3", Range("J" & Rows.Count).End(xlUp))
MyString = Cells(c.Row, 6) & Cells(c.Row, 7) & Cells(c.Row, 8)
Select Case UCase(MyString)
Case "5000MSSP40/2"
c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.145)"
Case "4000MSSP40/2"
c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.115)"
Case "2000MSSP40/2"
End Select
Next c
Application.ScreenUpdating = True
End Sub
I have some 8000 rows of data consists of a survey.
I need to find out TOPPERS of each SUB_CODE which are available in a single column.
I have clearly mentioned the problem and the solution required in the attached workbook.
I have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
[Code] ....
Short and simple. What is the quickest, easiest & most efficient way to find the first blank cell within a column using VBA?
I have previously used the following code to successfully pull out IE webpage source code for string manipulation.
Its a crude example to demonstrate the principle:
Public Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Public IE As Object
Sub Sample()
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True
[Code] ......
However when I substitute in a Google websites address into the IE.Navigate command, the code runs to the "Source_Code = IE.document ...." line then flags up a Microsoft Visual Basic error. "Run-time error '438': Object doesn't support this property or method"
The webpage that I am trying to access is a confidential company site, so you won't be able to access it yourself, but starts with [URL] ......
The one thing that I have noticed about this website is the Privacy Report icon in the lower right status window (Picture of an eye with a restricted symbol in front). I don't know whether this is the cause of my problem, or purely an incidental observation.
Is there something peculiar with Google sites that means that the source code cannot be extracted in general, or is this an issue specific to my site ? Does the Privacy Report icon have any relevance, and if so how do I switch that off ?
Using :
MS Excel 2010
IE Explorer 8.0
code to find/replace the letters: "A" with "Active", "P" with "Contract", and "C" with "Settled sale", all in column "Q".
View 2 Replies View RelatedI am trying to clean up and simplify my macros by compartmentalizing frequently repeated commands. I like to search for text in column headings and define the cell containing it as a range that I can later use .column or .row commands on, so my macros are a bit more flexible. The code I currently use for this is
Dim XColumn As Range ‘the cell containing the text “X”
Cells.Select
Selection.Find(What:="X", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Set XColumn = ActiveCell
I would like to be able to create a Macro (possibly name FindSetCell()) that will accept arguments and achieve the results of the above code in other macros
I think the command might look something like FindSetCell(“text to be searched for”,”name of newly Defined Range”) But I have not figured out how to code it
What is the proper VBA code to copy the contents of column T and column W (beginning at row 2 and ending at the last nonempty cell) in sheet 1 to column D and column E in sheet 3? Column T and column W always contain the same number of nonempty cells.
What VBA code will copy column A in Sheet 1 to column B in Sheet 3? The range of column A to be copied begins in row 2 and varies in length. Column A ends right before the last nonblank cell.
View 4 Replies View RelatedI need to go down column C and find the word "Canada" and the find the word "Total", there are some blank spaces between, and select from "Canada" to "Total" in column C and the cells in the same rows from column C to column H.
So if Canada is in C15 and Total is in C29, select C15:H29.
I have the text value "Ball, Red" somewhere in column A. I don't know which row it's in because it will never be in the same row twice. I need a macro to find this value, then, copy that whole row and "insert copied cells" right below that row and change the value in the newly created cell from "Ball, Red" to "Red, Ball".
I tried macro recorder to do this and had no luck...
Cells.Find(what:="Ball, Red", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Selection.Copy
Range("A21").Select
Selection.Insert Shift:=xlDown
Range(Selection, Selection.End(xlToLeft)).Select
Range(Selection, Selection.End(xlToLeft)).Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "Red, Ball"
Range("A22").Select
That's is all there is to it on this one.
I have a macro that was working fine until I added a new column to my active sheet. Now it fails with a run time error 1004, insert method of class failed. The code is as follows:
Private Sub UpdatePart_Click()
Dim S As String
Dim r As Excel. Range
Range("A2").Activate
S = InputBox("Enter the part no. you wish to update")
On Error Resume Next
If S = "" Then 'Exit Sub
'If StrPtr(S) = 0 Then
MsgBox "Update Cancelled"
Else
Set r = Columns(1). Find(What:=S, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)...............
way to search for a value in a cell (an unique one) using an input box and then if the value is found copying the whole row of the cell onto a new worksheet in the next available row within a table.
I am currently using the following archaic codes:
x$ = InputBox("Please Enter Catalogue Number")
For i = 4 To 500
If Sheet2.Cells(i, 1) = x$ Or Sheet2.Cells(i, 7) = x$ Or Sheet2.Cells(i, 8) = x$ Or Sheet2.Cells(i, 9) = x$ Then
Sheet1.Cells(6, 1) = Sheet2.Cells(i, 1)
Sheet1.Cells(6, 2) = Sheet2.Cells(i, 2)
Sheet1.Cells(6, 3) = Sheet2.Cells(i, 3)
Sheet1.Cells(6, 4) = Sheet2.Cells(i, 4)
Sheet1.Cells(6, 5) = Sheet2.Cells(i, 5)
Sheet1.Cells(6, 6) = Sheet2.Cells(i, 6)
End If
Next i
End Sub
this has the problem that i can't fit it to the next available row and have to be specific for each row.
it would also be great if i could put a messagebox in cases where the data is not found, basically saying that the item does not exist and if a simple excel Ctrl+F button or something similar could be attached to the msgbox so that the item can be searched and then added to the next available row.
In the attached sample sheet, Col B has data that will more often than not be duplicated. Each Line will have a corresponding value in Col L.
What I need to be able to do is this:
Starting from row 2 (important) is find duplicates and then place the corresponding figures for each from Col L as a Sum into Col N.
So '45678' appears twice in Col B and the Sum of the figures in Col L for '45678' is 1, so 1 will now show in Cell N2.
'55685' appears only once in Col B so it will have the "Sum" of 12 in Cell N3.
'99954' appears 3 times in Col B and has a sum of 9 from the Col L values so that will be displayed in Cell N4 and so on.
Hammer Sample #2.xlsx‎
I am attempting to do is have a macro (Via Command button) go through column A to find the word "TOTAL". Once that is found I want it to offset by 3 rows (from the word "TOTAL") to grab the number and place it into column B.
View 2 Replies View RelatedI have a spread sheet with bunch of rows and columns. Columns goes all the way from A ... BB and rows from 1 to 40,000
The main focus is column Y and AC
If there is a value of FALSE found in column Y then macro should go to previous row and copy the value that contains in column AC and then move down to the next row, , where the value FALSE was found and that's in column Y and paste that value in column AC the NUMERIC VALUE
Below is the data ...
I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.
Sub Findall()
Dim y As Long
Dim starta As String
Dim tr As Long, tc As Long
Dim sr As Long, sc As Long
Dim s As Worksheet, t As Worksheet
Dim SourceCell As Range
'Setup
Application. ScreenUpdating = False
Set t = Sheets("Target Sheet")
Set s = Sheets("Search sheet")
Set SourceCell = ActiveCell
Do While IsEmpty(ActiveCell) = False
Counter = 1
'Get last used row in Target Sheet
t.Select..........................
see attached spreadsheet. In sheet 1 I would like to look up each word in column D, seeing if they are in column B at all. Note if the word "Jill" is in D and "jilly" in a surname in B I would like it to get picked up. I have highlighted manually those that would get picked up. Those that do get picked up I would like to be copied into column C as per sheet 2 (this is what I would like it to end up like). There is a very long winded way of doing this using a find function and 1 column per word but as the actual sheet i'm using has thousands of different words this isn't really viable!
View 8 Replies View RelatedBasically this is what I want to do:
1. Search a specific column (Column 21/U) for non-blank values in Worksheet 1
2. Copy the entire row containing the non-blank values
3. Paste these rows into Worksheet 2.
Repeat steps 1-3 an additional 2 times, where Worksheet 1 is always searched but one more column to the right (ex. Column 22/V) is the target column for the search, then the rows are pasted into the next Worksheet (for ex. Worksheet 3)
I basically have a sheet where clicking a button on a UserForm creates an email and populates it with data from a specified sheet. So for example, the attachment v3.1, I've included looks at Sheet1 and populates an email with the data. However, I want it to drag data from another sheet. So, as per the attachment v3.2, I want the UserForm on Sheet1 and the data on Sheet2.
It works fine if the UserForm and data it's looking for are on the same page, but it won't find information from another sheet when the code is changed? I thought changing the code to Sheet2 instead of Sheet1 would work fine, but that's not the case!
I have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.
