Macro To Select Copy And Paste From Selected Cells
Feb 12, 2014
write a macro - Condition: When i select "Audit Round" = "Round 1" in B2 and press a button it will automatically copy data from B5:B8 and paste special value in C5:C8. Likewise if I select "Audit Round" = "Round 2" in B2 then it should lookup "Round 2" in "Row 4" and paste special values from B5:B8.
Here an example:
A
B
C
[Code]....
View 1 Replies
ADVERTISEMENT
Mar 26, 2013
I have some selected cells in column A, they are not consecutive. I would like to copy these values and then copy the same area but from a different column...
The code I have here is only working when I have a consecutive selection.
Code:
Set rng = Selection
fr = rng.Cells(1, 1).Row
lr = rng(rng.Count).Row
rng.Copy
View 5 Replies
View Related
Mar 31, 2014
I use few cells with formula and I would need when I click on the cell to run a macro that would copy the selected cell and do a paste value.
View 2 Replies
View Related
Aug 24, 2012
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
View 1 Replies
View Related
Dec 27, 2012
have two worksheets, "Entry form" and "Database" in my workbook. I am trying to put together a macro button to find the cell value D5(Entry form) in the column A:A (database), if found, copy selected cells (B5:D5,B7,B9) from entry form and paste in the adjacent cells of the row with the value in the database sheet.
VB:
'Match value D3 and replace data
Dim sht As Worksheet, outsht As Worksheet, r As Long
Dim rfoundCell As Range
[Code].....
View 9 Replies
View Related
Nov 20, 2012
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
View 7 Replies
View Related
Mar 4, 2014
Sheet1 Cells A1:J18 contain my data and fill down according requirement Where column I find always with end data filled.
ABCDEFGHIJ1DATENumPartyQtyStockQty PendingWhole Sealer-RetailerRemark215-02-141ab1250101000A-M12316-02-142ac1001270B-N125417-02-143ad32017100C-O312518-02-144ae70024D-P720619-02-145af2005E-Q9720-02-146ag1061F-R15821-02-147ah17710G-S23922-02-148ai277H-T271023-02-149aj10I-U321124-02-1410ak120J-V371225-02-1411al140K-W1221326-02-1412am142L-X1121427-02-1413an150a15rr16bb17cc18ddSheet1
Considering reference last data cell of column I I want to copy 15 last row and paste them in the same sheet with cells M1:T16 as shown
MNOPQRST1PartyQtyStockQty PendingWhole Sealer-RetailerRemark2ad32017100C-O3123ae70024D-P7204af2005E-Q95ag1061F-R156ah17710G-S237ai277H-T278aj10I-U329ak120J-V3710al140K-W12211am142L-X11212an150a13rr14bb15cc16ddSheet1
View 2 Replies
View Related
Mar 26, 2014
I have the following code that allow me to select all of the cells with the color same as the active cell within a selected range:
Sub SelectCellColor()
Dim CellColorFormat As Long
Dim RangeString
[Code]....
I'd like to ask how can I fix the error so that there will not be a limit of the number of colored cells in a selected area?
View 2 Replies
View Related
Apr 5, 2009
I have a folder "D:Documents and SettingsRakesh", which has many .xls files. Each file has a sheet called 'Cover Note'. I want to copy cells B2, C2, D4 and F3 from 'Cover Note' of each file.
These cells should be pasted in the current sheet, one row for each file. First cell of each row should have the source file name.
It would be better if macro can prompt to select the directory where ther source files resides.
View 9 Replies
View Related
Apr 23, 2014
I was messing around with some Macros, as an issue came up where clients were pasting over Data Validated cells (thus removing the validation). Somehow though, the feature where you can select a cell, then pull the active cell down through the column (and then can copy, fill series, etc)has become disabled. I deleted all the macros, and turned them off in the Trust Center, but when I click on a cell the box and plus sign still won't display for me to pull the cell down the column.
View 2 Replies
View Related
Dec 4, 2009
I need a macro to copy and paste cells from one worksheet to another, if there is the word true in the column L of that row.
View 10 Replies
View Related
Nov 27, 2013
I am using the following macro which copy and paste certain info from one sheet to another. The macro I am using is
Code:
Sub test()
With Sheets("Invoice")
.Range("A4:C17").Copy
Sheets("Transactions").Range("b" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
End With
End Sub
Is it possible to copy the value of B2 in the sheet (Invoice) as well and paste it for as many entries there are in the rows 4:17 in the sheet "Transactions". For example say i have items in row 4:10 when it copies the info to the sheet Transactions then it must copy the entry that is in B2 on sheet Invoice also in column a 4:10.
View 9 Replies
View Related
Oct 21, 2013
i have a macro that opens 10 other workbooks and copies cells onto a "master" workbook. Until recently, everything worked fine. Suddendly, while it opens the 9 books and copies as it is expected, but when it opens the 10th wb, the macro breaks at a very simple copy/paste.
The weirdest thing is that after it breaks, I cannot select any cells neither in the opened wb nor in the master wb. This continues even after I press the "reset" button in the vba. So, I am only able to select objects (text boxes etc) in my wb and not any cells.
Also, the "arrow" icon on the design toolbar is not active. And I've tried pressing and de-pressing the F8 key, but I still cannot select any cells.
I have option explicit in the beginning of my macro. And i'm using excel 2003.
View 2 Replies
View Related
Mar 17, 2012
I was asked about if i can copy defined cells when i checked its checkbox by using vba button , and another button in another book to paste those cells .
Mention that i may select more than one checkbox in copying and when i would paste these checkboxes , they would be in queue.
View 1 Replies
View Related
Jan 28, 2014
I have a set of data on sheet1 indicating test scores and basic information. At the top of the data, I have some drop-down menus that allow me to select certain minimal score results. I used conditional formatting to highlight the rows of individuals that meet the selected criteria from the top of the screen. You will notice in the screenshot, that I placed a button at the top called "Go!". Ultimately, I'd like for when I push the "Go!" button, Excel will copy the highlighted cells and paste them into sheet2 (beginning on row 2 as I have a title bar in row 1).
ExcelSnippet.JPG
View 5 Replies
View Related
May 29, 2014
I have a spreadsheet that has many shapes throughout and are connected together in a specific order. It is basically a drawing of steps and transitions in sequential order. I want to be able to select a group of cells that contain all the shapes that I want to select, run the macro and it select all the shapes within the selected cells. With all the shapes selected that I want, I can move and manipulate them as desired. The other option is to select each shape individually holding shift to make the group selection. The code that I am working with is as follows:
Sub SELECT_SHAPES_too()
Dim SH As Shape
Dim Rg As Range
Set Rg = Selection
For Each SH In Rg.Shapes
SH.Select Replace:=False
Next SH
End Sub
This is the idea that I want to do but I am having problems with the "for each shape in selection" portion.
View 2 Replies
View Related
May 4, 2009
Currently working on a project for university and still learning how to use macro.
Got a problem which im sure is an easy solution for all you experts out there. As shown in the picture; http://img300.imageshack.us/img300/1205/macrohelp.jpg. When the Sap number is entered (from A19 and onwards), it copies the value to cell B10. The general code is used below.
View 2 Replies
View Related
May 9, 2008
I want to copy text from a range of individual cells and then paste all of the individual cells copied and paste this data into a single cell with all the text separated by hyphens between the texts.
Example attached
If you are a macro writer i have a project that i need to complete. you will be compensated for your time.
View 9 Replies
View Related
Mar 26, 2008
I am currently using some code to copy a list of visible cells in column J and paste them in the same row in column F.
For some reason this code takes a long time to run, but it does work. I have to call it twice in my routine, and it can take up to 3 minutes per piece.
I was thinking about a way to speed it up, and I thought would it be possible to loop through a set of only visible cells in J and paste those values via Offset to F?
That being said, I've tried to do this, but not having much luck.
Here is the code that I am using which takes so long.
Code: ....
View 9 Replies
View Related
May 30, 2014
Im looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
View 1 Replies
View Related
Jul 15, 2014
I've recorded a Marco copying and pasting information from one cell to other cells and some of the copying functions paste to two cells. I just need this to loop through all information I'm copying from the the new cells.
Range("I1").Select
Selection.Copy
Range("D1").Select
ActiveSheet.Paste
Range("J1").Select
[Code]...
View 7 Replies
View Related
Mar 7, 2008
Arised from my earlier posting in Populate ComboBox With Specific Sheet Column Range. I have the following working code below, but am having trouble finding coding examples to select specific cells from the selected row (that was found by selecting a ComboBox value)and update TextBoxes with those individual values after the UserForm has been initialized (the bold "GREEN" comment in the code below). I have been able to find plenty of references to update TextBox values to Cells, but that doesn't do me much good in this application since the User needs to verify the old data in these cells before updating them using the UserForm TextBoxes.
I was toying around with several different variations of code (none of which worked properly), so I left it out for clarity of my working code. I'll post up this non-working code as needed, because I really wanted a fresh answer...not what I was trying to do. The attached file should be sufficient to see what's going on
Private Sub UserForm_Initialize()
With Sheets("SR Information")
.Range("A2", .Cells(Rows.Count, "A").End(xlUp)).Name = "MyRange"
End With
SRnumber.RowSource = "MyRange"
End Sub
Private Sub SRnumber_Change()
Dim ServiceRequestNumber As String
Dim c As Range
Dim rngG As Range
Sheets("SR Information").Select
With Selection
ServiceRequestNumber = SRnumber.Value
For Each c In Intersect(ActiveSheet.UsedRange, Columns("a"))
If c = ServiceRequestNumber Then..................
View 4 Replies
View Related
May 11, 2007
I think I have the comand to select a range of cells, but can not figure how to paste this selection later in the spreadsheet.
This is how the application works.
I have a spreadsheet that I am using as a template. The first 10 rows have to be repeated later in the same spreadsheet after I make a manual page break.
I the spreadsheet I am doing the following commands:
With xlApplication.ActiveSheet
xlPageBreakManual
.Rows(istartrow).Pagebreak = xlPageBreakManual
End With
View 9 Replies
View Related
Mar 21, 2009
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
View 9 Replies
View Related
Jul 5, 2013
Sometimes I need to copy the values in adjacent/continuous cells and paste them into the cells which I select and which are not adjacent/continuous.
Like for example i want to copy values from A1:A4 and paste in C1,C4,C7,&C10
View 2 Replies
View Related
May 14, 2014
I have a worksheet with some info that is filled in from other employees. I have Customer Name, Date of Oldest Invoice, Avg. Days Beyond terms in column N42:N44, with the data in column M42:44. I want to copy and paste that into another workbook, I need to transpose the data and then paste it into the next blank row. IF POSSIBLE, I would like to have some of the column headings the same as the above fields, and I would like to paste the data into the correct column heading.
Currently I have the code listed below. It copies the data, opens the spreadsheet, (this is where it fails) find the next blank row and transpose and paste the data. It does transpose and paste the data but it does not look for the next blank row, instead it just transposes and pastes the data in the last cell that was active when the work book was closed.
Code:
Private Sub CommandButton1_Click()' Paste Macro
' Macro recorded 5/14/14
'
'
Range("O42:O47").Select
Selection.Copy
Workbooks.Open Filename:="L:Financial Services! FRA !! Preston !3rd Party Collections Accounts 2014.xls"
[Code] ..........
View 8 Replies
View Related
Feb 13, 2010
Feedback.xls is the file I want to have my macro run in. By pushing a button to run the macro, it will prompt the user to select where their file is on their computer. This file will have different file names based on the end user. For example sake, I've included CAP.xls.
After the user selects their file, it will prompt them to choose which tab to copy and paste data from. Typically, there will be 30+ tabs on their worksheet. For example sake, I've created 5 tabs on CAP.xls. The tabs in their workbook will be labeled as I have labeled mine, M1 CAP, M2 CAP & M3 CAP. Therefore, it should prompt the user to select which tab to choose from.
After the user selects their tab (M1 CAP, M2 CAP, M3 CAP), the macro should prompt the user to choose which row of information to copy. In CAP.xls, I have a few rows of information to choose from. They all start with FY10A1, FY10A2, FY10A3, but this information could change. Once they select the row, it will copy each of those fields onto the respectively labeled fields on Feedback.xls.
View 5 Replies
View Related
Aug 23, 2012
I am trying to achieve something like this :
Find a specific text in my column B (example : "Proposal ID"), when "Proposal ID" is found, select this cell and offset to the column C (Offset(0, 1)). Then copy this cell value in another sheet.
This will be repeated with different texts (always in the column B), so if the text is not found, I need the macro to continue running.
View 5 Replies
View Related
May 12, 2007
I have a cell in one worksheet xxx in workbook XXX column F selected
I want to run a macro that will open (if not already open) Worksheet yyy in workbook YYY (in C:/Test/ directory)
And copy values from columns B and C of workbook XXX worksheet xxx (the row determined by the cell selected in the F column) to columns D and G respectivley of workbook YYY worksheet yyy
I'm hoping the data will be pasted to a new row at the bottom of all existing rows on worksheet yyy (xlup?)
If multiple cells in column F worksheet xxx are selected, it would be nice if the data was sent over to yyy in the same fashion, ordered top to bottom all at once...I don't want to have to select each row individually and run the macro
View 10 Replies
View Related
Nov 15, 2008
I am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
View 10 Replies
View Related