I have an issues database that lists issues by [URL].......
I'm working on a test plan where we can enter an issue under in to a cell between J3 and J100, for instance... "1111".
I've been trying to figure this out all morning.. but I would like to create a macro or script that automatically adds a hyperlink to the cell with an issue number...
Append "http://WEBLINK.com/" & "cell.value" Or something like that.
I have a workbook open and my A column cells are filled with (example) Mike-1 in the first row Mike-2 in the second row and so on. Now I have another folder on the computer with Word documents that I want to hyperlink to. The corresponding Word file is named mike1. So I want Excel to go through column A and Hyperlink to the corresponding Word file.
View 6 Replies View RelatedI'm trying to create a link to a folder and to insert it in a cell. The folder name is: "C:DISCO CTEMPLATES #1". I tried to copy that text and paste it into the cell. Excel recognizes that as a hyperlink but when I click the cell a message appears: "Cannot open the selected file" Could the problem be because of the "#" symbol?
View 2 Replies View RelatedI searched this forum to find a macro that will do what I'm describing below. There seems to be quite a number of macros doing almost what i want, but most require a macro to be run, filename to be entered, etc...
I want the macro to automatically append the current date to the filename when it is saved. It must save it in the same directory where the file was opened from, and the name must be exactly the same as before, except that it must remove the previous date appended to the filename, if there was one appended.
I don't want to run the macro for this to happen, the normal File Save command must do the trick...
Thus c:my documentsTest.xls will become c:my documentsTest 29102009.xls; and
c:my documentsTest27102009.xls will become c:my documentsTest 29102009.xls
I am using MS Excel 2007.
I have column "A" a list of my PDF filenames and File path in Column "B". I want to establish hyperlinks for each of these PDF filenames (column A) and link it with the file path that I generated in Column B.
=HYPERLINK(B1,A1) did it very well, but unfortunately when converting to PDF, the hyperlink is not working, and I believe the conversion retained is only in text, so now my only resort is hardcoding it by VBA.
I basically need a formula in one tab of a spreadsheet that if another cell contains text it will search for that text in another tab and display a useable hyperlink to it.
So I want a formula in A1 in Sheet1 that will search for the text contained in A2 in Sheet2 and display a useable hyperlink to the cell in which that text is contained, in Sheet2.
This may not even be possible, but if it is then that would save me SO much time.
I want to use script to programmatically create Hyperlink in multiple cells. The Hyperlink will trigger a macro event and run a simple command using the "PC Name" as input variable. The Hyperlink should have:
-Text to display: - different "PC Name" in each cell
-Type the cell reference: - corresponding to the cell where the Hyperlink is inserted
-Link to: - Place in This Document
I tried using cell formula, but it always default to "Existing File or Web Page".
ExcelHyperlink.png
I am trying to use an active cell (i.e. "Sheet2!E7") which always changes, to create a hyperlink on a different sheet to that particular cell. What is happening is I have a master list of current open POs. On a separate sheet I have the PO listed in greater detail. I want the PO number on my master list to have a hyperlink that brings you to my detailed PO on another sheet. Simply, I need a way to turn my active cell into text (not the contents, but the cell itself).
View 2 Replies View RelatedI have a workbook for Purchase orders.
how it works at the moment is when I fill in the Purchase prder sheet then save it, I have a macro that
Copies Sheet "Purchase Order" creates a new sheet to paste it to then also copies some details to A Sheet called "Register.
I would like to be able to (if possible)
1/ automaticly create a hyperlink between the P/o Nomber stored on the register as it is storing the new sheet &
2/ automaticly change the sheet tab to reflectthe P/order number in Cell G8
I have very little knowlage of VBA & am learning how to record macros so please be gentle.
here is the macro I recorded ....
I'm running Excel 2003 and I'm looking for assistance with programmatically creating hyperlinks. I have to update a Shared Workbook on a weekly basis. The cells in column D contain a catalog id and I need to create a hyperlink that includes this id in the url.
What I want to do is insert a new row, enter the catalog id and then create a hyperlink that contains the id. Additionally, the text to display has to be the 8 digit id. Here is an example of the hyperlink.
I m creating a hyperlink in a sheet, pointing from the selected cell in sheet3 to a different cell in the other sheet(sheet1 or sheet2).
The user is supposed to select a cell, and activate the macro.
The macro should then create a hyperlink to this cell.
The cell will usually contain a textdata, and the target cell will usually contain same textdata, but in other sheet(sheet1 or sheet2).
In this sheet when we open the data sheet you will find a column named Feild, In the feild column when we click on any text data in a cell it should automatically redirect us to the other sheet of the column where the exact text data is present.
I need to create a way to generate specific URLs based on a fixed URL and adding a variable number in a cell to create that URL.
example of the finished product
[URL]
So I have:
Cell B is http://www.boxpool.com/=
Cell D is 99
What formula should i use to generate [URL] so that different numbers can be used to generate unique URLs.
sometimes i'll have some text i want to show in a userform textbox. let's say the text happens to be in a sheet named story, and it is in A1 of the worksheet.
A1 says, for example:
" The next big thing can be found by clicking here "
if the note above were on a web page, all you'd have to do is click on 'here' and you are off the the next big thing. but so far, when i use this code to bring the text in story!A1 into the userform textbox all i get is the text. there is no 'clickability' as it were.
Me.textbox.Value = Range("story!A1").Value
is there some bit of code magic one can use to make a userform textbox function with html code?
How can I change the text color within a cell when I am using a concatenation formula? I have the following formula;
=" Total Bonus Earned ("&TEXT(A2/VLOOKUP($A$1,PR_DB,2,False),"#0.0%")&" of 2006 Earnings):"
In the text function portion I would like to format the result in red. An example of the result of my formula I am seeking is as follows; Total Bonus Earned (10% of 2006 Earnings): Do I need to create a custom format and if so how do I call it up within the text function?
I need help in making a VBA to create a looping hyperlink drilldown for each cell in the inventory_general wksht.
The purpose of this sheet is to allow a user to click on a hyperlink which will then reference a macro to
autofilter the data in the bin_lot worksheet to display all rows for that particular item number.
Apparently, you can't select all the cells and insert a hyperlink because all the hyperlinks will reference the first cell value for autofiltering.
This is what I tried but it's not working obviously.
Sub HyperlinkDrilldown()
'
ActiveSheet.Hyperlinks.Add Anchor:=Selection, Address:="", SubAddress:= _
"Bin_Lot!A1", TextToDisplay:=target.value
Range("A2:A21").Select
End Sub
I have three columns. Column A=" Name", Column B=" Date" and Columnc="Amount". I need to find and go to the correct amount based on a certain name and date as criteria.
I was going to see if it was possible to use this =INDEX(C1:C1000,MATCH(1,(A1:A1000=D1)*(B1:B1000=E1),0)) with a hyperlink, but I can't even get it to work without a hyperlink. I also tried this to find the match= SUMPRODUCT((A1:A1000=E5)*(B1:B1000=EE6)*(C1:C1000)). I found it on a website(I'm not sure how it works.) My next shot was going to be with multiple criteria vlookup, but I can't get anything more than a plain vlookup to work. I'm using excel 2007 non-commercial use.
Below is a bit of a big macro i'm writing but I'm not sure how to edit my code to append the date after the filename. Then i'll need to refer to the exact filename later in the code?
View 2 Replies View RelatedI've got data in a table that has am induvidual "job number" assigned to each row, but this job number could have a variation such as 1000A 1000B 1000C but they may not necessarily be one after the other in the table (other job numbers may appear in between) so i need a to macro to remove all job numbers lets say that start with 1000 and paste them and the end of the table. so i end up with consecutive numbers. Can this be done? I've played around with the find funciton to loop through the column and find all relating job numbers then cut the entire row but cant quite seem to get it to work
View 5 Replies View RelatedVB:
ActiveSheet.Hyperlinks.Add Anchor:=Selection, Address:="", SubAddress:="Work_Log!" & Sheets("Work_Log").Cells(b, 1), TextToDisplay:="View"
I want this to link to Work_Log!.Cells(b,1), however instead of grabbing the specific cell, it is pulling the contents of the cell and creating a URL of that. For instance if b = 1 and cell A1 contains the value "yellow" then this code is giving me the hyperlink to WorkLog!Yellow when I want it to read WorkLog!A1
I have a macro that would create a hyperlink for every one of the files in a folder that a specific cell gave the url address for.
Recently I got moved to a new pc and forgot to migrate my macro's over. In combing back through previous threads... I found the macro, but now it won't work.
[Code] ......
The error that I get is:
Compile error:
Invalid use of property
I get this error at row
Range (Cells(Rows.count, "U").End(xlUp).Offset(1, 0).Address)
Why did the macro used to work and not anymore?
I'm trying to add code that create a hyperlink to a file in a recently created folder in the path of L:Elec Dept ProjectsRELEASED FOR CONSTRUCTION". The code below should find the newly created *BOM*.xls created and created a hyperlink in the next available row starting on row 27 and column O on my worksheet "BOM". The code currently runs with no errors, but I'm not seeing any resulting text with path / links created.
View 5 Replies View RelatedThe purpose of this endeavour is to create a cell that when the user clicks
on it, it will open up a Word file that THAT particular cell represents.
FIRST STEP:
Take the values from Column D (Tract Number), then add a ".doc" extension to
it, then put the UNC filepath (\serverdata
eports) in front of all of that
and put it in Column E. See me example below:
File path plus Tract Number plus Extension
\serverdata
eports 7-5-065-085 .doc
.... to generate something like this:
\serverdata
eports7-5-065-085.doc
SECOND STEP:
Use the value (only when the user clicks on the hyperlink) from the cell in
Column E and start up Word.
I want to create a hyperlink from an Excel cell to a worksheet tab. Problem is, the tab name changes frequently. The good news is I have a cell that displays all my tab names and automatically refreshes. How can I create a hyperlink that will like to the tab based on the value in that cell?
View 1 Replies View RelatedI want the macro to:
1. Create a new worksheet when data is entered into a cell (ie. entered text "ACC2013" into cell A5)
2. Rename that worksheet to correspond to the data in the cell (ie. change worksheet name from sheet2 to "ACC2013")
3. Create a hyperlink between cell A5 and sheet2
I'd like for this macro to loop through a range of cells so I don't have to have a long code. Let's say my data range is from A5:A23. If this requires multiple macros that is fine.
I have a userform with 3 Comboboxes, all of which need to be populated from the dropdown option before OK is pressed. I haven't used any fancy names as this is just a straightforward (or so I thought) entry form ... the UserForm is called UserForm1 and the 3 ComboBoxes are called ComboBox1, ComboBox2 & ComboBox3. I have tried to be economical with my validation routine but I cannot get an incremental variable added to the end of the word "ComboBox" to be recognised ... my code is below :
Private Sub Validate_ComboBoxes()
While MyComboCount < 3
MyComboCount = MyComboCount + 1
MyComboBox = "ComboBox" & MyComboCount
Select Case "UserForm1." & MyComboBox <<<< This fails
Select Case UserForm1.ComboBox1 <<<< This works
Case ""
MyValidCheck = MyValidCheck + 1
Select Case MyComboCount
Case "1"
MsgBox "Enter the number of weeks for this period"
Case "2"
MsgBox "You need to enter a start date"
Case "3"
MsgBox "You need to enter an end date"
End Select
End Select
If MyValidCheck > 0 Then
MyComboCount = 4
End If
Wend
End Sub
I have this script that runs. and checks to see if anything is in C1. If something is, it saves...if it doesn't, it fails and does not save.
Sub SaveAsCell()
Dim strName As String
On Error Goto InvalidName
strName = Sheet1. Range("C1")
ActiveWorkbook.SaveAs strName
Exit Sub
InvalidName: MsgBox "The text: " & strName & _
" is not a valid file name.", vbCritical, "TitleBar Name" ........
I have a table with unsorted Time Data and Headings for each Row and Column (See attachment). I need to display this data in another worksheet as a scrollable list.
Then when I click on any list item, it displays only that data in the following format:
A1 = Time. A2 = Row Heading. A3 = Column Heading.
Easier to understand if you view the simple spreadsheet attached.
I need a macro to create a hyperlink i.e....... I have an excel sheet with numbers in column A.....I have files in a folder that matches the numbers in column A....
How would I create a macro to create a hyperlink from the numbers in column A to the "matching" file names in a folder?
I run into is that many of our staff don't know there are tabs at the bottom of the page that show different worksheets. writing some VBA code that would grab the names of all the sheets and create a single sheet with the tabs listed as buttons that would hyperlink to each sheet of it's given name. Kind iof an index for the sheets.
Also bonus if 3 rows could be insterted on each of those pages with a button that links back to the index page.
I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library
Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String