sometimes i'll have some text i want to show in a userform textbox. let's say the text happens to be in a sheet named story, and it is in A1 of the worksheet.
A1 says, for example:
" The next big thing can be found by clicking here "
if the note above were on a web page, all you'd have to do is click on 'here' and you are off the the next big thing. but so far, when i use this code to bring the text in story!A1 into the userform textbox all i get is the text. there is no 'clickability' as it were.
Me.textbox.Value = Range("story!A1").Value
is there some bit of code magic one can use to make a userform textbox function with html code?
I want to do is have a User form that allows a user to add a new column across several sheets (i.e. b2, then c2, then d2) where what the user has selected from 3 defined ranges (in this case commodity, pack_type and pack_spec) is concatenated. see the example attached. So for exmaple, I would like the choice of adding into cell B2 across all sheets (except sheet pack) gold solid 5kg. Then I can add the next into c2. I have tried searching few a few examples of userforms with various problems but I dont know how to code it correctly.
i would like to create a userform with a textbox to enter a product code , a command button to run VBA and a big text box to show output of VBA from Textbox 1 which i will connect to DB and pull back information relevant to that product code , is this possible i can create the userform no problem and already have code to pull back from DB into Excel ,
I have a user form on which I need to create a textbox every time the user clicks a button. There are too many to create them all in advance and make them visible when needed. The sample attached, from this forum, is good, except, the numbers in the text box just scroll along and I need to see all the text typed into my textboxes. I would like the textboxes to be multiline, wordwrap and have them resize according to the amount of text.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
I have an excel spreadsheet on a network, and I need to be able to email a link to the spreadsheet to everyone who needs to use it.
I have done the formula =cell("filename") to get the filepath, i have created a userform which initialises textbox1 to pick up the filename. I have written a macros to create an email, it puts in the subject and the body of the message. In the body of the message is the value of textbox1, but i cannot get it to format this filepath as a hyperlink.
Here's the code in it's entirity i have done:
[VBA] Private Sub CommandButton1_Click() ESubject = "A Workbook has been created which requires your input." SendTo = ""
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
I have a workbook open and my A column cells are filled with (example) Mike-1 in the first row Mike-2 in the second row and so on. Now I have another folder on the computer with Word documents that I want to hyperlink to. The corresponding Word file is named mike1. So I want Excel to go through column A and Hyperlink to the corresponding Word file.
I'm trying to create a link to a folder and to insert it in a cell. The folder name is: "C:DISCO CTEMPLATES #1". I tried to copy that text and paste it into the cell. Excel recognizes that as a hyperlink but when I click the cell a message appears: "Cannot open the selected file" Could the problem be because of the "#" symbol?
I have column "A" a list of my PDF filenames and File path in Column "B". I want to establish hyperlinks for each of these PDF filenames (column A) and link it with the file path that I generated in Column B.
=HYPERLINK(B1,A1) did it very well, but unfortunately when converting to PDF, the hyperlink is not working, and I believe the conversion retained is only in text, so now my only resort is hardcoding it by VBA.
I basically need a formula in one tab of a spreadsheet that if another cell contains text it will search for that text in another tab and display a useable hyperlink to it.
So I want a formula in A1 in Sheet1 that will search for the text contained in A2 in Sheet2 and display a useable hyperlink to the cell in which that text is contained, in Sheet2.
This may not even be possible, but if it is then that would save me SO much time.
I want to use script to programmatically create Hyperlink in multiple cells. The Hyperlink will trigger a macro event and run a simple command using the "PC Name" as input variable. The Hyperlink should have:
-Text to display: - different "PC Name" in each cell
-Type the cell reference: - corresponding to the cell where the Hyperlink is inserted
-Link to: - Place in This Document
I tried using cell formula, but it always default to "Existing File or Web Page".
I am trying to use an active cell (i.e. "Sheet2!E7") which always changes, to create a hyperlink on a different sheet to that particular cell. What is happening is I have a master list of current open POs. On a separate sheet I have the PO listed in greater detail. I want the PO number on my master list to have a hyperlink that brings you to my detailed PO on another sheet. Simply, I need a way to turn my active cell into text (not the contents, but the cell itself).
I'm running Excel 2003 and I'm looking for assistance with programmatically creating hyperlinks. I have to update a Shared Workbook on a weekly basis. The cells in column D contain a catalog id and I need to create a hyperlink that includes this id in the url.
What I want to do is insert a new row, enter the catalog id and then create a hyperlink that contains the id. Additionally, the text to display has to be the 8 digit id. Here is an example of the hyperlink.
I m creating a hyperlink in a sheet, pointing from the selected cell in sheet3 to a different cell in the other sheet(sheet1 or sheet2).
The user is supposed to select a cell, and activate the macro. The macro should then create a hyperlink to this cell.
The cell will usually contain a textdata, and the target cell will usually contain same textdata, but in other sheet(sheet1 or sheet2).
In this sheet when we open the data sheet you will find a column named Feild, In the feild column when we click on any text data in a cell it should automatically redirect us to the other sheet of the column where the exact text data is present.
I have an issues database that lists issues by [URL].......
I'm working on a test plan where we can enter an issue under in to a cell between J3 and J100, for instance... "1111".
I've been trying to figure this out all morning.. but I would like to create a macro or script that automatically adds a hyperlink to the cell with an issue number...
Append "http://WEBLINK.com/" & "cell.value" Or something like that.
How can I change the text color within a cell when I am using a concatenation formula? I have the following formula;
=" Total Bonus Earned ("&TEXT(A2/VLOOKUP($A$1,PR_DB,2,False),"#0.0%")&" of 2006 Earnings):"
In the text function portion I would like to format the result in red. An example of the result of my formula I am seeking is as follows; Total Bonus Earned (10% of 2006 Earnings): Do I need to create a custom format and if so how do I call it up within the text function?
I need help in making a VBA to create a looping hyperlink drilldown for each cell in the inventory_general wksht.
The purpose of this sheet is to allow a user to click on a hyperlink which will then reference a macro to autofilter the data in the bin_lot worksheet to display all rows for that particular item number.
Apparently, you can't select all the cells and insert a hyperlink because all the hyperlinks will reference the first cell value for autofiltering.
This is what I tried but it's not working obviously.