Is it possible to validate a texbox at entry time to ensure the value entered is a muliple of 6.50.
i.e. ONLY 6.50 or 13 or 18.5 etc is entered. I have used the MOD command at spreadsheet level to accomplish this but have no idea if it's possible at userform / VBA level.
What is the best option to validate a value entered through the below prompt?
View 4 Replies View RelatedI have a form that will allow the user to type in a date. I need to take that value and validate that it is between 01/01/2007 and 10 years ahead of the current day.
View 4 Replies View RelatedI have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with
dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _
Title:="Enter Date")
' Validates the entered date is a valid date
If (IsDate(dNewMonth) = False) Then
[Code]...
in simple terms im trying to cross reference a name list with registers from another wrokbook. so basically the desired result is. i press my button and it loads the second workbook up, it then uses the a name list in the new book and searches for that names maches in the registers (a group of sheets) on the previous workbook then if a match is found it colours the background in green. I am however getting errors e.g. "run time error: '424': Object required"
with this line then highlighted in yellow:
u = ShtNm.Sheets("Sheet1").Cells(1, "C").Value
Sub Macro1()
Dim u As Integer
Workbooks.Open FileName:= _
"S:HR TrainingO2 Operational TrainingRetentions and CollectionsUpgrades
ames 18th june onwards.xls"
ShtNm = ActiveWorkbook.Name...............
I recorded a macro (which worked), then tried to get more out of it by adding code to add a further function (which didn't work). The code is as follows:-
View 3 Replies View Relatedi have a user form & I would like to run macros when a texbox gets data. If there a "P" I want it to do nothing but if theres an "F" I would like the user Form to unload
View 3 Replies View RelatedIs it possible to enable/disable a texbox in excel which has been assigned a macro. To make it clear I'm not talking about a textbox within a userform. I understand I should really be using command buttons but I prefer the look of textboxes.
I have the following code to change the colour of the textbox (name: txtCreateInvoice) but the final line to disable the textbox doesn't work.
Code:
Sheets(1).Shapes.Range(Array("txtCreateInvoice")).Select
With Selection.ShapeRange.Fill.ForeColour
.ObjectThemeColor = msoThemeColorText1
.Brightness = 0.5
End With
Selection.Enabled = False
I have a userform with a variety of checkboxes, textboxes etc which populate their data to cells on the worksheet.I know how to do that and it works fine, but now I need to populate values from multiple items to 1 cell.
For example, if the user selects 3 checkboxes then their respective values are copied across as 3 values in 1 cell rather than one writing over the others.
I want to send the value of selected item in texbox , the value format is change by combobox value ..and I want the value is fill on the next column of sheet ( see attached file please)
View 2 Replies View RelatedWe have an internal web site that has files I need to download daily. The filenames have date strings in them. I've setup some formulas to make the url based on the NEXT dated file I need to download.
And I don't have direct access to the drive the files are stored on, I can only get them through this web site.
Right now, I have individual macros for each file I need. They'll follow the url and download the file if it's there, or return a message to me if it's not. But there are several different files. I have to run each macro one at a time, at different intervals during the day until they get downloaded.
Is it possible to make a macro loop through all the URLs (I have them stored on a sheet, called "FileDownloader" in Range G2:G10) and check if the URL's are valid (without actually attempting to download the file). I can then make some kind of dashboard to tell me when the files are ready for download.
I have a spreadshhet which has data by month, year, week and bi-weekly. I would like everything to be monthly. How can I put a formula which will look up the cell and see if it monthly it will the value of the cell beside it, if it is weekly it will take the cell value and multiply by 2 and so on.
View 4 Replies View RelatedI have a range of cells (A1:A50). If "Hello" is written in any of those cells then a MsgBox says "Are you sure?". If vbYes the cell is colour coded blue. If vbNo then it is red.
The problem I have is that "Hello" may already exist within the above range. I only want the above to fire on the cell that has just been changed within the range.
I have some code but it checks every cell within the range whenever any cell is changed within the range. Whereas I just want it to fire on the active cell if that makes sense?
How can I validate that all values in a range of cell are the same, excluding
empty cells?
I have a database on one sheet and a 2 count if formulae recording information on the next to be exact one formulae counts the number of monthly values and the other count yearly values. I want the sum of these formulaes to be equal or less than 25. and to show an error if the sum of these is mor than 25.
View 9 Replies View RelatedI have a ComboBox on a UserForm. One of the fields that I fill in is a date.
After the date is entered I want to check if it's a valid date.
VB:
Private Sub cboEnterDate_Exit(ByVal Cancel As MSForms.ReturnBoolean)
' Make sure a valid date was entered, it must be in the format 2013/10/21.
On Error Goto ERR
'If Not IsDate(cboEnterDate.Value) Then
[Code] .....
ERR:
MsgBox "The date entered is not a valid date", vbInformation
Cancel = True
cboEnterDate_Enter
End Sub
The code:
VB:
'If Not IsDate(cboEnterDate.Value) Then
execute the If routine if I enter the date 2014/03/33
When I enter the date 2014/03/0001 it do not see it as an invalid date and exit the routine.
The code:
VB:
If Not IsDate(FormatDateTime(cboEnterDate.Value, vbShortDate)) Then
send the execution to the ERR routine if I enter 2014/03/33
When I enter the date 2014/03/0001 it do not see it as an invalid date and exit the routine.
How can I get the validation to catch the 2014/03/0001 as an invalid date as well.
I would like to simply validate the value entered to a cell against cells of a number of columns. I’d like it to return a vlue to be able to report it in another cell as below. (had to cmma separate the columns, can't get them aligned in this editor)
A, B, C, D, Q, R
1, b, 1, 2, 1, existing
or
A, B, C, D, Q, R
1, b, 1, 2, 5, not existing
So the user enters a value in cell Q to check against the other columns and return a value to R. Additionally, the cells to be validated (A - D) may contain more than one character, i.e. cell A could = 1b2.
I have to validate a cell to only accept the letter a, d ,f ,g h,. I know this is probaly very simple but i havent touched excel since last november and have completely forgotton the most simple of things!
View 4 Replies View RelatedI have a button that opens a workbook. What i need is if that workbook is already open then continue with the code. I know how to do this workbook.activate and error messages but I want to avoid activating the workbook. I was hoping there was a way to use something like on message resume next like when using error messages.
View 3 Replies View RelatedHow to check whether a cell contains email address or not..
For example:
if a cell contains xxxxxx@xxx.com or .in or .net , i want to show the cell type as email in next column.
I need to determine if excel cell contains any character except number If it contains any character then place 1 in adjacent cell for example, otherwise 0
Column                A                    B                          Â
150 000Â Â Â Â Â Â Â Â Â Â 1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
150000Â Â Â Â Â Â Â Â Â Â Â 0Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
150,000Â Â Â Â Â Â Â Â Â Â 1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
150.000Â Â Â Â Â Â Â Â Â Â 1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
150000 kzt     1                          Â
150000kzt       1
I have a sheet that contains two values in seperate columns that I need to concatinate into one value for the drop down. If I use one value my code works but doesn't show all the values. If I use both values I get a 1004 - Application Defined or object defined error. I bolded the section that if I add I get the 1004 error. Is there some sort of restriction when creating the validate list for a drop down? My list is not reaching 65000 characters which is the string cut off.
Dim intAdEventCol As Integer, intAdEventNmCol As Integer, intRow As Integer
Dim intLastRow As Integer, intLastCol As Integer
Dim strAdEvent As String, strAdEventNm As String
Dim strAllAdEvent As String
Do Until intRow > intLastRow
strAdEvent = Worksheets(gstrcDataWorkSheet).Cells(intRow, intAdEventCol).Value
strAdEventNm = Worksheets(gstrcDataWorkSheet).Cells(intRow, intAdEventNmCol).Value
If intRow = 2 Then..........................
Data validation failed me here, so I resorted to VB to esnure only letters are entered in a certain cell. The code below is a mess and I need a hand to repair it. I can't figure out how to declare i . .
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("a59")) Is Nothing Then
If Target.Count > 1 Then Exit Sub
The code below automatically displays the validation when I select the cell. But I would like the cell validation only display when the cell is empty. If the cell has data in it, then do nothing, but if the cell is empty, then display the validation.
If Not (Nothing Is Application.Intersect(Target, Range("B9"))) Then
SendKeys "%{down}"
End If
If anything else is entered into the input box a message box (MSGbox) with a vbCritical button will appear with the following prompt "You entry (insert entry data here) is inccorect." I don't know the code for "insert entry data here".
View 4 Replies View RelatedIn my spreadsheet, on ( sheet A) I pick up a value to a range (O2:O22) from other worksheet (sheet B), the value is validated when a cell in the same range but other column (A2:A10) reach a specific criteria.
But in the same column if the criteria is typed again I gone a have the same value on range( O ), and I dont want that, because this value represents a total for a day, and is to be added to other cell.
I'm using this, to pick up the data
Ex:
(A2:A10) Criteria
(O2:O10) value picked up
on SheetA, Sumif(sheetBA10:A40,A2,SheetBK10:K40)
How can I count only one of the values picked up from sheet B?
I have a VBA user form that asks for user's input. The form has 3 textbox. I would like to check for the entry & make sure that it's numeric & not null. If it's not numeric or null, I'd like to display a warning message & highlight the textbox & ask for entry again.
Here's what I have but it's not really working. The warning message will come up but the next textbox is highlighted:
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If Not IsNumeric(Me.TextBox1.Value) Then
MsgBox "Please Enter Only Numeric Values"
TextBox1.SetFocus
End If
End Sub
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If Not IsNumeric(Me.TextBox2.Value) Then
MsgBox "Please Enter Only Numeric Values"
TextBox2.SetFocus
End If
I have a TextBox on a UserForm and I want to validate the user's input as soon as he moves focus from the TextBox but before he selects OK. I have the validation function, but what is the event
View 5 Replies View RelatedI have a userform with 5 textboxes. Each textbox looks for certain kinds of user entry...my code has trouble in re-locating the cursor to the SAME textbox after rejecting the user entry. And BTW, ideally the text box would be highlited in this instance.
Private Sub TextBox2_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim okstop As Boolean
Dim yesno_continue As Boolean
Dim mytext As String
okstop = False
Do
TextBox2.SetFocus
TextBox2.SelStart = 0
mytext = TextBox2.Value
If Not IsDate(mytext) And mytext <> "" Then
TextBox2.Value = ""
yesno_continue = MsgBox("Please enter a date...try again?", vbYesNo)
TextBox2.SetFocus
Else
okstop = True
End If
Loop Until (yesno_continue = vbNo) Or (okstop = True)
End Sub
validation up to the point that the user can click cancel and exit, also when nothing is entered a msgbox appears and for the 3rd inputbox a value greater than 0 must be entered.
Sub Trajectory() 'Trajectory macro
t0 = InputBox("Enter a value for the initial time(t0)")
'If t0 = "" Then MsgBox ("You must enter a value for t0!")
'Exit Sub
tf = InputBox("Enter a value for the final time(tf)")
'If tf = "" Then MsgBox ("You must enter a value for tf!")
'Exit Sub
Dt = InputBox("Enter a value for the time increment(Dt)")
'If Dt = "" Then MsgBox ("You must enter a value for Dt!")
'Exit Sub
'If Dt = 0 Then MsgBox ("You must have a valid increment")
x0 = Val( Range("F4"))
v0 = Val(Range("F5"))
g = Val(Range("F6"))
y0 = Val(Range("F7"))
q0 = Val(Range(" F8"))
Selection.Formula = FILL_TABLE
End Sub