VBA To Validate Entry?
Feb 25, 2014
I have a range of cells (A1:A50). If "Hello" is written in any of those cells then a MsgBox says "Are you sure?". If vbYes the cell is colour coded blue. If vbNo then it is red.
The problem I have is that "Hello" may already exist within the above range. I only want the above to fire on the cell that has just been changed within the range.
I have some code but it checks every cell within the range whenever any cell is changed within the range. Whereas I just want it to fire on the active cell if that makes sense?
View 11 Replies
ADVERTISEMENT
Mar 27, 2014
I have a ComboBox on a UserForm. One of the fields that I fill in is a date.
After the date is entered I want to check if it's a valid date.
VB:
Private Sub cboEnterDate_Exit(ByVal Cancel As MSForms.ReturnBoolean)
' Make sure a valid date was entered, it must be in the format 2013/10/21.
On Error Goto ERR
'If Not IsDate(cboEnterDate.Value) Then
[Code] .....
ERR:
MsgBox "The date entered is not a valid date", vbInformation
Cancel = True
cboEnterDate_Enter
End Sub
The code:
VB:
'If Not IsDate(cboEnterDate.Value) Then
execute the If routine if I enter the date 2014/03/33
When I enter the date 2014/03/0001 it do not see it as an invalid date and exit the routine.
The code:
VB:
If Not IsDate(FormatDateTime(cboEnterDate.Value, vbShortDate)) Then
send the execution to the ERR routine if I enter 2014/03/33
When I enter the date 2014/03/0001 it do not see it as an invalid date and exit the routine.
How can I get the validation to catch the 2014/03/0001 as an invalid date as well.
View 3 Replies
View Related
Feb 11, 2008
validation up to the point that the user can click cancel and exit, also when nothing is entered a msgbox appears and for the 3rd inputbox a value greater than 0 must be entered.
Sub Trajectory() 'Trajectory macro
t0 = InputBox("Enter a value for the initial time(t0)")
'If t0 = "" Then MsgBox ("You must enter a value for t0!")
'Exit Sub
tf = InputBox("Enter a value for the final time(tf)")
'If tf = "" Then MsgBox ("You must enter a value for tf!")
'Exit Sub
Dt = InputBox("Enter a value for the time increment(Dt)")
'If Dt = "" Then MsgBox ("You must enter a value for Dt!")
'Exit Sub
'If Dt = 0 Then MsgBox ("You must have a valid increment")
x0 = Val( Range("F4"))
v0 = Val(Range("F5"))
g = Val(Range("F6"))
y0 = Val(Range("F7"))
q0 = Val(Range(" F8"))
Selection.Formula = FILL_TABLE
End Sub
View 9 Replies
View Related
Jul 3, 2007
How it is possible to control the entry for the E-mail address?
I mean if there is no '@' or '.' and more that I dont know, maybe you know better and faced to such problem
View 9 Replies
View Related
Apr 12, 2012
I'm making a data entry form for a user, and one of the fields is in a time format (mm:ss). Is there any way that I can validate that field in "cmdOK_Click()" so that when the user clicks "ok" on the data entry form, if they haven't entered a date a msgbox comes up.
I tried IsNumeric with an If function but to no prevail.
View 4 Replies
View Related
Dec 7, 2008
In my form I have the user enter in the current date in Textbox1. My program is designed only to work in 2009 so I want to check to make sure the 1) the date is in 2009 and 2) textbox1 is not empty. If it is empty then it displays a message box with "Not a Valid Date. Please Enter Date as MM/DD/YYYY. Date has to be in 2009" - this doesn't work. Second, if the date is outside of 2009 it is to display a meeage box saying "Date has to be in 2009".
Here is my current code which is not working.
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If TextBox1 = vbNullString Then Exit Sub
If IsDate(TextBox1) Then
Else
MsgBox "Not a Valid Date. Please Enter Date as MM/DD/YYYY. Date has to be in 2009" ...
View 8 Replies
View Related
Jul 6, 2007
I've looked through the threads and while I have used Data Validation to stop duplicate entries, I want to also make certain that those entries are only Dates. In other words, if Cells A1:A10 are to contain unique dates, I use Data Validation with the Custom condition below; = COUNTIF($A$1:$A$10,A1)=1
If the user enters the same date more than once, an error message pops up. However, the user is not prevented from entering a range of dates in a cell such as "July 5-7". How can I validate that the date is entered only once AND the entry is a valid Date. With Data Validation it seems I can specify to allow a DATE with specific criteria, or the Custom, but I can't see how I can do both.
View 3 Replies
View Related
May 30, 2008
excal VBA programming.I have attached the file name "help" for your easy explanation purpose.
1. Is it possible to hide sheet nos. 1,2,3,4 & unhide the sheet as wished by me by puting the value (1or 2 or 3 or 4) in B3 cell.
2.There are per day production rate in E18 to E22 cell. Now whenever I will give value in H18 or H19 or H20 or H21 or H22, it will check whether the value is same with the respective E 18 or E19 or E20 or E21 or E22 cell. If both the values are not equal then give a message box "WARNING!!! YOUR VALUE IS NOT SAME". Can it be possible by creating VBA programming.
View 5 Replies
View Related
Sep 20, 2007
i have a data validation problem is there a way i can use =INDIRECT(DEC!'Ai11>DEC!'AJ11) is this correct? when the cell in dec AI11 is greater than AJ11 i need a validation stop to take place
View 9 Replies
View Related
Mar 20, 2014
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
View 4 Replies
View Related
Sep 11, 2013
I am having a sheet where I keep track of when online surveys have been sent to users. The users enail address (column K) may be on the list for several times, but I need to make sure that there is at least a 7 days pause between sending the first mail and the second, depending on the visit date (column G).If there are less than 7 days between two entries with the same email address, the user is not qualified for taking another survey.
I was thinking to write an IF formula which returns either 1 or 0 and then let conditional formatting highlight and HIDE the row via a VBA loop.
View 3 Replies
View Related
Mar 14, 2014
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies
View Related
May 1, 2009
I used a form with textboxes for data input for one of my vb macros. Currently I have the private sub from the form transfer those entries to a remote cell on the spreadsheet, (like in column "HZ"), so that the macro that will actually utilize them can retrieve them. Is there a way to pass that data directly from what is entered in the form in the textboxes to the macro that will actually use them?
View 4 Replies
View Related
May 26, 2009
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
View 6 Replies
View Related
May 28, 2008
say sheet 1 has 2 collums A & B
collum A is Names Collum B is Dates
A B
Bob Fenton 05/04/08
Rob Smith 05/06/08
Al Feth 05/08/08
Al Feth 05/18/08
Al Thomas 04/23/08
Rob Smith 05/23/08
Bob Smith 04/22/08
Bob Fenton 05/15/08
Al Feth 05/10/08
sheet 2 has unlimited collums in collum A is the name of the person in collum B to Z (or more) i would like a fomula that will search sheet 1 and return the dates for each entry of that name.
so sheet 2 would be like ....
View 9 Replies
View Related
Dec 6, 2007
We have an internal web site that has files I need to download daily. The filenames have date strings in them. I've setup some formulas to make the url based on the NEXT dated file I need to download.
And I don't have direct access to the drive the files are stored on, I can only get them through this web site.
Right now, I have individual macros for each file I need. They'll follow the url and download the file if it's there, or return a message to me if it's not. But there are several different files. I have to run each macro one at a time, at different intervals during the day until they get downloaded.
Is it possible to make a macro loop through all the URLs (I have them stored on a sheet, called "FileDownloader" in Range G2:G10) and check if the URL's are valid (without actually attempting to download the file). I can then make some kind of dashboard to tell me when the files are ready for download.
View 9 Replies
View Related
May 19, 2009
I have a spreadshhet which has data by month, year, week and bi-weekly. I would like everything to be monthly. How can I put a formula which will look up the cell and see if it monthly it will the value of the cell beside it, if it is weekly it will take the cell value and multiply by 2 and so on.
View 4 Replies
View Related
Jun 9, 2007
How can I validate that all values in a range of cell are the same, excluding
empty cells?
View 9 Replies
View Related
Jan 30, 2009
I have a database on one sheet and a 2 count if formulae recording information on the next to be exact one formulae counts the number of monthly values and the other count yearly values. I want the sum of these formulaes to be equal or less than 25. and to show an error if the sum of these is mor than 25.
View 9 Replies
View Related
Apr 7, 2009
I would like to simply validate the value entered to a cell against cells of a number of columns. I’d like it to return a vlue to be able to report it in another cell as below. (had to cmma separate the columns, can't get them aligned in this editor)
A, B, C, D, Q, R
1, b, 1, 2, 1, existing
or
A, B, C, D, Q, R
1, b, 1, 2, 5, not existing
So the user enters a value in cell Q to check against the other columns and return a value to R. Additionally, the cells to be validated (A - D) may contain more than one character, i.e. cell A could = 1b2.
View 4 Replies
View Related
Jan 19, 2010
I have to validate a cell to only accept the letter a, d ,f ,g h,. I know this is probaly very simple but i havent touched excel since last november and have completely forgotton the most simple of things!
View 4 Replies
View Related
Jan 22, 2009
I have a button that opens a workbook. What i need is if that workbook is already open then continue with the code. I know how to do this workbook.activate and error messages but I want to avoid activating the workbook. I was hoping there was a way to use something like on message resume next like when using error messages.
View 3 Replies
View Related
Aug 18, 2009
What is the best option to validate a value entered through the below prompt?
View 4 Replies
View Related
Nov 13, 2011
How to check whether a cell contains email address or not..
For example:
if a cell contains xxxxxx@xxx.com or .in or .net , i want to show the cell type as email in next column.
View 8 Replies
View Related
May 13, 2014
I need to determine if excel cell contains any character except number If it contains any character then place 1 in adjacent cell for example, otherwise 0
Column                A                    B                          Â
150 000Â Â Â Â Â Â Â Â Â Â 1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
150000Â Â Â Â Â Â Â Â Â Â Â 0Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
150,000Â Â Â Â Â Â Â Â Â Â 1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
150.000Â Â Â Â Â Â Â Â Â Â 1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
150000 kzt     1                          Â
150000kzt       1
View 5 Replies
View Related
Jul 1, 2009
I have a sheet that contains two values in seperate columns that I need to concatinate into one value for the drop down. If I use one value my code works but doesn't show all the values. If I use both values I get a 1004 - Application Defined or object defined error. I bolded the section that if I add I get the 1004 error. Is there some sort of restriction when creating the validate list for a drop down? My list is not reaching 65000 characters which is the string cut off.
Dim intAdEventCol As Integer, intAdEventNmCol As Integer, intRow As Integer
Dim intLastRow As Integer, intLastCol As Integer
Dim strAdEvent As String, strAdEventNm As String
Dim strAllAdEvent As String
Do Until intRow > intLastRow
strAdEvent = Worksheets(gstrcDataWorkSheet).Cells(intRow, intAdEventCol).Value
strAdEventNm = Worksheets(gstrcDataWorkSheet).Cells(intRow, intAdEventNmCol).Value
If intRow = 2 Then..........................
View 9 Replies
View Related
Nov 10, 2009
Data validation failed me here, so I resorted to VB to esnure only letters are entered in a certain cell. The code below is a mess and I need a hand to repair it. I can't figure out how to declare i . .
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("a59")) Is Nothing Then
If Target.Count > 1 Then Exit Sub
View 9 Replies
View Related
Feb 1, 2010
The code below automatically displays the validation when I select the cell. But I would like the cell validation only display when the cell is empty. If the cell has data in it, then do nothing, but if the cell is empty, then display the validation.
If Not (Nothing Is Application.Intersect(Target, Range("B9"))) Then
SendKeys "%{down}"
End If
View 9 Replies
View Related
Aug 10, 2006
If anything else is entered into the input box a message box (MSGbox) with a vbCritical button will appear with the following prompt "You entry (insert entry data here) is inccorect." I don't know the code for "insert entry data here".
View 4 Replies
View Related
Jan 22, 2007
In my spreadsheet, on ( sheet A) I pick up a value to a range (O2:O22) from other worksheet (sheet B), the value is validated when a cell in the same range but other column (A2:A10) reach a specific criteria.
But in the same column if the criteria is typed again I gone a have the same value on range( O ), and I dont want that, because this value represents a total for a day, and is to be added to other cell.
I'm using this, to pick up the data
Ex:
(A2:A10) Criteria
(O2:O10) value picked up
on SheetA, Sumif(sheetBA10:A40,A2,SheetBK10:K40)
How can I count only one of the values picked up from sheet B?
View 5 Replies
View Related
