On my worksheet, each row between 20 an 50 may be hidden or unhidden; that will constantly change. When one of these rows is hidden (such as row 21), I'd like the value in column C in that same row (such as C21) to be 0 (zero). If the row is visibile, I'd like the value in column C in that same row to be 1. Is there worksheet code to do this?
View 3 RepliesI am trying to format all cells on all sheets (hidden or otherwise) as "Locked" so when the sheets are protected the user can't see the formulas. This macro individually selects every sheet in the book and applys the formatting. Is there a way to modify this code to accomplish the same thing without having it actually select every sheet? The only reason it is an issue is that after running the macro you end up on the last sheet in the book.
View 7 Replies View RelatedI am having trouble with my VBA code, it hides groups of rows (projects) based on the contents of corresponding cells above. these have either 'yes' or 'no' in them (indicating if the person is active in that project). The Yes/No is formula based from another sheet.
what I am trying to do, is have particular cells, withing the projects rows, locked (as they are also populated by formulas) but have other cells open for editing.
when I try and do this i get an error with my VBA, i am assuming that as cells are locked, the VBA is prohibited form hiding inactive projects/rows. i tried an addition at the bottom but this hasn't worked
Code:
Sub Worksheet_Calculate()
Dim i As Long, StartRow As Long, EndRow As Long
StartRow = 13
[Code]....
I am performing an autofilter within a spreadsheet to display only those lines where a name exists in column A. Then I delete all hidden rows. I am having a problem when the autofilter results in no rows being visible. Here is the code I am using for the delete hidden rows:
On Error Resume Next ' In case there's no hidden cells
With Cells
Set rngHidden = .SpecialCells(xlCellTypeVisible)
.EntireRow.Hidden = False 'Unhide all cells
rngHidden.EntireRow.Hidden = True 'Hide previously visible cells
.SpecialCells(xlCellTypeVisible).EntireRow.Delete 'Delete previously hidden cells
rngHidden.EntireRow.Hidden = False ' Unhide previously visible cells
End With
End Sub
im looking for a basic macro for workbook copying, all workbook(all hidden, unhidden, and very hidden) sheets.
i know how to do unhidden sheets of course however the hidden and very hidden are giving me some trouble...i need to also copy over all the macro's, buttons, and drop down box's as well..not just values.
i have an old spreadsheet that i created about a year or so ago.
i managed to make some sheets "very hidden" as opposed to just "hidden" or "visible".
the problem is i can't find them ! i have tried "format, sheet, unhide" but that is greyed out.
i do have passwords for them, but i can't find them to put these in!
Need to autohide cells in sheet 2 and 3 based on sheet 1 cells that are hidden. (Example if i hide 150 switchgear on SOV tab it will hide 150 switchgear in Customer and Foreman sheets as well).
View 1 Replies View RelatedI am using the VLookup function with two seperate sheets. The first sheet is what I have created. The second sheet is one that was given to me.
I know how to build the format as I have done it numerous times in the past. This one only works if I copy the data into notepad, then copy it back into excel. Then it will work. I have looked at the formatting and I cannot see any differences.
way to get it to work without the notepad part?
I have a 15 sheet spreadsheet that has many formula and results that are obtained from a "Master Sheet." I want to hide the "Master Sheet" from users view.
When I do so the formulae can't find the info they require. How do I hide a sheet so that users can't see it, but the formula from other sheets can still access it?
I would like to have the cell A26 equal to "VAT" when I enter a VAT percentage and set the cell A26 to "NOVAT" or blank when the columns G:H are hidden.
View 6 Replies View RelatedI'm trying to create a custom function that will return if a cell is hidden or not. I have it working with just a single cell being called
View 11 Replies View Relatedif it is possible to have say 8 rows hidden, but when you print the page it prints the rows?
View 9 Replies View Relatedi've an excel file where a final presentable sheet is linked to some hidden sheets which i dont want the user to see. Thru VBA, i'm performing some format related stuff in those hidden sheets, using: Sheets("Historical1").Visible = True. later, VBA sets it back to FALSE. But, i want to get rid of this hiding/unhiding, if its possible. My code has the following structure:
Sub tame_blph1()
Sheets("Historical1").Visible = True
Sheets("Historical1").Activate
Dim coll As Integer
Dim startcoll As Integer
Dim endcoll As Integer
startcoll = 25
endcoll = 124
For coll = startcoll To endcoll Step 2
If Len(selection) > 0 Then Call Macro1
Next coll
Sheets("Historical1").Visible = False
Sheets("Table").Select
End Sub
In other words, can we perform the above without hiding and unhiding the Sheet called "Historical1"
I have a worksheet with 28 sheets. I want the first sheet to be the only sheet displayed when opening the file and then want people to have the ability to click a hyperlink to unhide a particular sheet. Then when they go back to the main page (via another hyperlink), the sheet that was unhidden will be hidden again. I was able to put together some code from [URL]. When I click on a hyperlink on the main page, I get a "Subscript out of range" error and it highlights Sheets(strSheet).Visible=True from the Worksheet_FollowHyperlink code. I made a basic spreadsheet with just 3 sheets and plugged this code in and it worked fine so I'm not quite sure what the error is. I attached the spreadsheet I'm using.
View 3 Replies View RelatedI am trying to use the SUMIF function to create a formula that will read the visible cells in Column B and if any visible cells in Column B are equal to or greater than zero I want Excel to sum the corresponding values in the visible cells of Column A. Not so hard but I'm having a difficult time getting Excel to ignore data in hidden rows.
See attached file for and further explanation : Sample.xlsx
I've tried using SUMIF as well as the AGGREGATE function but no success, yet.
when I want to send by email I find I cannot copy these smaller sheets - every attempt at a copy will also copy the hidden columns.
How to copy a spreadsheet and NOT pick up the hidden columns?
I realise this might be nearly impossible or considered useless because no hidden columns would mean either making the copy with blank hidden columns or altering all formulas to suit a sheet which now does not have all the original columns.
When I choose to record a macro, the window to name the macro opens and allows me to name it, but when I close it, I can see it is recording at the bottom of the sheet, but the stop button with the relative/absolute button has disappeared. I can't change relative/absolute. How can I get the button back on the page?
View 2 Replies View RelatedI am copying a range of rows (which include some hidden rows). When I paste them I see all the rows. Is there a way to retain the hidden attribute?
View 2 Replies View RelatedI have a worksheet that currently has columns AB to XFB hidden. I want to unhide them, so I selected column AA and then drug the mouse over to the right (toward the empty space), intending to right-click and select "unhide". I do this all the time with no problems.
However, from the instant of my drag to the right, Excel has become totally unresponsive. I see it using 25% of my quad CPUs in task manager, but there is no active memory delta and it has been sitting for over 20 minutes now.
I'd rather not lose the work I just entered, but I can't seem to get Excel to come back to life by pressing escape or clicking in the worksheet. I've noticed slowdowns before when there is a lot of actual data in the cells selected, but these columns were empty to the best of my knowledge.
I have been sent a workbook which contains a number of formulae that reference hidden worksheets (see attached JPEG).
I cannot work out how to display these sheets? The workbook does not seem to be protected, I can edit and save the visible sheet. Can anyone shed some light on how to view the referenced sheets?
is there a code to hide specific columns that i dont really need. i dont want to delete them, just hide them. even if i try to unhide them manualy from Format- Unhide they dont unhide. These columns stay hidden at all time.
View 2 Replies View Relatedwell , when i save the spread sheet , some rows still hidden condition
i apperaed them , but when exit with save , it will be hidden again
B shift members History list 2013 (1-1-2013) draft.xls
I have a spread sheet which has a number of protected cells so that they user can tab only on required cells to enter data. At times some of the rows are hidden however pressing "TAB" will continue to tab through on the cells within the Hidden Rows. Is it possible to only TAB through Cells which are visible?
View 1 Replies View RelatedI have protected a workbook with a hidden sheet. I am trying to save the hidden sheet to a .pdf format.
It works well until I hide the sheet. I see from other post that the .select is a big part of my problem but I'm not sure how to get around it.
I'm trying to get my code to work by trying to copy from a visible tab into a hidden tab. Currently I have it able to function when the tabs are hidden, and i've been trying to get it to work.
My code is below. I have a variable section because there are different sheets that will be hidden, and this is a way that i found works to get the variable tabs selected.
I have the following code which works fine when all of the sheets are not hidden:
View 3 Replies View RelatedI have a worksheet with a macro as follows: ...
View 6 Replies View RelatedAlready read some threads about how to hide and unhide an excel application.
I was able to hide my excel application, but, somehow I'm not ale to unhide it when I close my Form:
I have got a multisheets database where both rows and columns may be
hidden according to a given criteria. Only blanks rows and columns
should be hidden.
Now I need a formula to check if there is no "valuable" data hidden.
Checking test might be:
SUBTOTAL(9,reference) = SUBTOTAL(109,reference)
In a sheet I have a two hyperlinks with Sheet4 and Sheet5. when I am clicking on first hyperlink then the sheet4 is opening and when I am clicking on the other hyperlink then sheet5 is opening. But if I hide these two sheets it is not opening,
Is there any way so that hide sheets should be opened? will I have to write code for that?